“I was kinda of afraid a lot of you would hate that car” Who on its own mind would hate a supercharged Mini, especially an early one designed by non other than Frank Stephenson? BTW, the only thing that really matters is whether you like or not since you are the one paying for it.

Nice Rabbit. Came here for the BMW content, stayed to enjoy the vw's even though it's an ff. I'm old enough to remember when these Rabbits where everywhere in the U.S.. My dad had the diesel rabbit truck, I learned to drive with it. back before we had to call them "Golf" I always preferred to call them Rabbits, so continue to do so to this day just to rib the young guys.

Hopefully this swap goes better than the previous one 😂✌

This engine is looking gorgeous, cant wait to hear it scream, but please dont start bolts or nuts with the drill/impact, start them by hand and then use the drill, otherwise you will end up stripping a bolt and spending hours on a 2 minute job.

Just to let you know I missed a lot of videos because they didn’t appear in my feed. I’ve clicked the notification bell now and have caught up on the videos. 👍

Now that’s the way real men work on their engines. Bare hands…..no rubber gloves👍

@kris856

3 жыл бұрын

although - NITRIL gloves help a lot - rubber is nothing good, nitril is the new rubber :) after years of having my hands skin being itchy because of all the chemicals, I started to wear the nitril gloves... honestly - once you try them on you will only reluctantly want to smear your hands with the grease...

I can't wait to hear this run!

I'm soooooooo excited!! Hell yeah Memphis!!

These trumpets, looks absolutely awesome!!!

I love this channel. Awesome cars, relatable content, loads of DIY and super chill and relaxed vibes. It's a breath of fresh air with so many shout car vlogs out there.

What an amazing transformation. Your videos are always entertaining, informative, beautifully filmed and edited and leaves me looking forward to the next instalment. I think you might be some kind of genius 🧐👌

Very soothing and satisfying that watch you get stuff done. Love the video!

Looks amazing dude! Well done!👌

Such a gorgeous car, so elegant yet sportive. I love this swap by the way, great choice !

Incredible work, the engine looks amazing, not only functional but also a piece of art, congratulations!! Really loking forward to see it mounted and working😬😬

Engine looks fab.....nice job. Can't wait to hear it running.

Hi there Memphis I have been waiting patiently for this series to be back on! The engine looks fantastic and can’t wait for next video Carbs look great by the way

Watching your vids from Australia. What an awesome looking engine.

Really enjoyed this. Thank you

Ya know there is something so satisfying about watching an engine build, I could watch this for hours on end lol Keep up the good work!, I cant wait to see how this thing sounds!

There is a soothing effect of watching your videos! Great Build, great filming, great editing :)

Man, I changed so many timing belts with the engine out that I had forgotten how much of a pain it is to change when the engine is in the car ! Love all your videos, and it's nice seeing a fellow compatriot being that successful on YT ! Regards from Liège !

The engine looks super clean now! Your channel has been amazing lately. The content is always super entertaining and informative. It's hard to find a balance between the two, but you have!

Excellent job!!!. Two liters of power 🔥. Waiting next video!!!

Awesome video. I love the editing and the effort you've put into the build.

Nice video looking forward to seeing this engine finally in the VW and all worked up!! 😁😁

Looks amazing. Well done getting it all sorted.

Memphis , I love these videos ! Thank you

Awesome work, the inlets look fantastic.

Great video memphis I cant wait to hear that engine startup and those trumpets look amazing🤤

That looks amazing man, probably gonna start a very similar project on my mk2 jetta soon!

Great job, so excited for this! :D youre doing a very similar swap to what i have planned for my mk1 jetta so im following this one closely! (mine is 1.3 currently so will be a bit more work changing the engine mounts and so..)

Nice one mate really enjoyed this video

Amazing work 💪🐺

begint er goed uit te zien ! succes !

It will look amazing!!

Je bent echt mijn favoriete mechanics-vlogger geworden. Ik zie al uit naar je volgende vlog!👍

Easy to watch and always interesting 👍👍

What an absolute dream setup. Fuel injection is nice and all, but nothing beats a fancy set of carbs 😍

Precision at its best

Nice done , mooi gedaan !!!

Loving this build Memphis 🇬🇧🇬🇧👍👍

Howzit.. Memphis! you always do show an amazing job on everything you have done on your VW golf i have one myself and would've really like you to work on my Golf because you exactly know how and what to do next.. For that i give u my respect!!

Nosso famoso AP hahaha 🤏🏻😎

Beautiful trumpets! This is going to be sick! 🤙

I am so exited for the end result 🤩

You are a very accomplished young man I look forward to fitting the engine

The 8v is fantastic for torque cant wait to see it in

Good job.. all best from Makedonija..👌🇲🇰🙋

Loooking beautiful!!!

demaciado epico bro!

I’m not sure why, but I find your videos very relaxing 😌 Great job, by the way 👌

Great video. The engine looks awesome. Looking forward to the installation and start up. :-)

This is gonna sound AWESOME! 🤩

Ziet er uitstekend uit Memphis , vooral die inlaten .Top ! heb al zin om de volgende video te zien 😎👌

Lekker bezig! 👌🏻

good to see you buddy. greetings from Poland once again 👍👍

I saw a Mark I Ford Fiesta the other day and whilst it doesn't have the charm of the Golf it does have a unique look that we don't see on UK roads anymore. I hope you enjoy the build, we will.

Looks great Memphis, 100k subscribers coming up sooner rather than later 👍👍

Great Job man keep going on

Perfect goed gedaan 😉

the Trumprets, a perfect choise Memphis, keep up the GREAT work =)

Quedaron muy chingones amigo 😎😎😎

presente da quando avevi pochi follower! sei il top continua cosi! saluti dall italia

Can't wait for seeing your next video on this one...

Ik heb het weleens eerder verteld dat ik A-Technisch ben, maar op een of andere manier is dit voor mij erg boeiend om naar te kijken ook al weet ik de functies niet en waar het allemaal voor dient....maar in combinatie met de beelden en de muziek is het erg aangenaam om ernaar te kijken ook al ben ik een leek. Je manier van uitleggen en hoe de video is opgezet, wordt het me allemaal wel duidelijker ook al ontgaat mij soms de essentie van wat je aan het doen bent. Maar dat is juist het mooie eraan en kijk ik erg graag naar je video's !Ben dan ook erg benieuwd naar het inbouwen van deze motor in je Golf en of het allemaal wordt zoals je er van verwacht. Dus graag naar de volgende episode !!

wow.. good job my guy

Engine looks very good 👌👍

and the 827 in Brazil that we call high performance AP engine are great engines for preparation here in Brazil in terms of preparation is the main thing, both turbo and aspirated are doing well.

@brenofelipe4751

2 жыл бұрын

Fala Samuel, poderia me dizer se esse motor dele realmente é um AP?

@samuelbarbosa9553

2 жыл бұрын

@@brenofelipe4751 fala mano sim e um AP 2.0 o bloco e mesmo do gol GTI mk3 que veio pra cá famoso bloco alto pode ver também do lado esquerdo ele tem respiro igual a do golf gti mk3 que veio pra cá as medidas são iguais do 2.0 do Santana seu não to enganado oque muda e a biela o AP 2.0 bloco baixo tem 144mm e o alto 159mm o alto tem um R/L melhor

@brenofelipe4751

2 жыл бұрын

@@samuelbarbosa9553 Boa, valeu mano!🙏🏽

@samuelbarbosa9553

2 жыл бұрын

@@brenofelipe4751 Tmj 🤙🤝

Looks perfect!!!! Hope the e28 gets some of that in the future

This build is looking good! According to what I have researched about 2.0 engines some years ago, I think that timing covers from a MK3 GTi engine code "2E" will suit this engine perfectly, since both are the so-called long block. If you find some of these cars at junkyard take them and try, they should fit!

A work of art……👍

as a mk1 cabriolet owner, I really enjoy your videos.

Damn cant wait to hear that engine running !

Back in the day on the vortex, someone did a flow test on 2.0 counter flow and cross flow heads and found the Audi 3a head responded the best to porting and polishing. Even compared to the cross flow head.

That engine is looking so good.

Good work and I wish you luck to find finally the right timing belt cover

Cant wait to see that beauty in there 🤩

Wow nice😍😍good job👍👍

Its sad to see this amazing engine that we don't have in Brazil. Amazing work! Cheers

@heliomateuscardoso1058

3 жыл бұрын

é quase igual o motor AP

Sterk op weg naar de 100k!

love how easy it is to work on the engine bay

Cool build

You're designing a monster my friend, it's 2.0L🇩🇪⚡💯👍🤙😍😎😎

I can't wait to see this working. This MK1 will simply fly. I hope you change the tires, especially the front ones!!! :)

Another awesome video. I can't believe you're still under 100k subs

I was wondering, wouldnt it be easier to start the engine on a stand first? BTW, congrats on your new sponsor. I really enjoy your vids, clean and sharp and like the talking and the explanations.... This is a class channel and you have my respect ...

Hallo Memphis, Ziet er goed uit knap werk🥳👍

Wow, awesome. Thinking about doing something similar in my mk2.

Oh man, I can't wait to see you rip through gears at the Nürburgring with that thing inside your car.

Good job mate keep it out :)

lekker bezig!

Nice work. So much easier out of the car on an engine stand.

Keep it up are hard work 💪

lookin good

Awesome!

Hahahaha! Didnt know there existed an adapter kit for the dizzy xD Could have saved myself a lot of work, on the lathe, turning aluminium adapters by hand :P Thanks for the video :D

Yiha, 12 secs since release! :) Thanks!

Its neat the TT is so well known world wide. They are just an hour drive from me.

Killin it