Golden Horse Roller Skate Review: My First Impressions
Тәжірибелік нұсқаулар және стиль
Full disclosure: I do have a partnership with Golden Horse, however they are not telling me what or what not to say... and I chose to partnered with them because I have been searching far and wide for a roller skate brand that makes supportive and fairly affordable skates that I feel comfortable recommending to my clients... and that is what they do! This video was recorded a while ago, before I had put a lot of miles on them. So it really is my first impressions. For more updated info, you can read my blog or follow me here and catch the next review! Links Below:
Here is the blog that goes with the video:
www.mejackiec.com/post/golden...
Here is my guide for understanding technical spec:
www.mejackiec.com/post/golden...
**Check this one out before you order your skates, so you are informed!**
Here is where you can order your skates:
ghskates.myshopify.com/discou...
Follow me on IG too for short tutorials, class updates and more:
mejackiec?...
Let me know in the comments what your thoughts are!!!
0:00 Intro
0:46 Street Magic Table Review
4:07 Street Magic Snapshot
5:26 Street Glide Table Review
8:47 Street Glide Snapshot
10:27 Maestro Table Review
15:06 Maestro Snapshot
17:00 Summary
Пікірлер: 23
Thanks for the information!!!
Will you explain the 3? 60. Pivot pin
I’m looking at these too but I want to know the difference between the standard and the 360 pivot. Thanks
@jackiec9265
3 жыл бұрын
I break that down a bit in my blog post, but essentially the 360 will be more reactive. If you skate fast, and control is important (for bombing hills for example) go with the standard. If you do more rhythm style skating or like spinning, the 360 will give you extra flexibility.
The plastic trucks are a dealbreaker on any skate for me. Whenever I’m on my edges the plastic trucks bend and hit the bottom of the boot either stopping me completely or slowing me down
Thank youuu for the boot comparison! For a layperson this is v helpful. How are you finding the weight on the glide vs magic? I noticed the glide is marketed as their "lightweight" boot and I am curious how much weight you can really save there x
@jackiec9265
3 жыл бұрын
The Glide and Magic feel about the same to me when it comes to weight. All three are actually pretty light.
@lucypinnington674
3 жыл бұрын
@@jackiec9265 Thank you J been looking for this answer everywhere x
And I wear these indoors as long as I have the correct wheels?
How do these compare to a more expensive boot and plate setup like harlic boot with something like a rolline plate like the dance or energy??
@jackiec9265
2 жыл бұрын
The plates aren't quite as dialed-in as a rolline and the boot is more comparable to an Edea than a Harlick... Edea style minus the super engineered materials. Overall I'd say they are great skates for the price, but top-of-the line is top-of-the-line. I'd say these are mid-quality of a high performance boot. So, for instance, in my Golden Horse Maestro-C, I feel totally comfortable doing my triple jumps, but does the lining mold to my feet like an Edea would? no. Can the boots take the same beating an Edea or harick could? Not sure... time will tell. I've had the skates for a while now, and I can say I do wear my Meastro-C's the most of all my skates.
I have one more question sorry...(wanna buy and GH have not been responsive!) is the kingpin angle the same for the aluminium v plastic plates? It looks like it maybe smaller (10?) on the plastic x
@jackiec9265
3 жыл бұрын
Good question! The vanguard kingpin is at a 16 degree angle and the fiber compound frame kingpin is at a 6 degree angle.
@lyonsroyal7431
3 жыл бұрын
When i Dm'ed them they left me on read lol. But when i emailed them they responded pretty quickly.
The maestro ones are basically a copy of some Edea ones but these ones are made in Italy maybe better for serious artistic figure skating and there's a great variety of models from basic to professional skating
@jackiec9265
2 жыл бұрын
Yeah, I'd say these are Mid-level high-performance skates. Great for the price. Edea is high-end high-performance.
How do you request the street glide skates?
@jackiec9265
2 жыл бұрын
I think you can e-mail them.
What's the difference between a 8mm and 7mm wheel axle?
@rosiec4050
2 жыл бұрын
If you have 7mm axels you need 7mm bearings in your wheels. American skates usually have 8mm axels, whereas European brands like Edea have 7mm axels.
you look hapa... race wise.. good content
Omg you are so beautiful