Gold recovery from 5 kilo or 11 lb DDR RAM chips inceneration method nitric acid Aqua Regia Gold melting.
Жүктеу.....
Пікірлер: 97
@yardmine2 жыл бұрын
digging your content, keep it up!
@giorgosxyrichis36302 жыл бұрын
Very nice job with ashing ic chips especially in separation on magnetic materials and non magnetic you spend time but you save acids 👍👍And very nice yield in gold !! 💪💪
@masterscrap30552 жыл бұрын
Excellent video!
@shaneyork3002 жыл бұрын
Good yield and beautiful gold!
@METALHUNTERCHANNEL19702 жыл бұрын
I always like this channel.....
@hectortello92262 жыл бұрын
Congratulations for u channel
@tothista44772 жыл бұрын
Very nice!
@hectortello92262 жыл бұрын
Excellent vídeo my friend
@sherifaly10172 жыл бұрын
Master... 🥇
@karlbe84142 жыл бұрын
Thanks for the video and motivation. I have at least 1 lb. of DDR chips and also some BGA and thicker chips to one day process or have some one toll refine for me. Some recently trimmed fingers as well. I think your DDR yield was good from what I have seen others post.
@rastakillah37862 жыл бұрын
These 14 minutes looks like at least 14 days.. xD noice job, noice work, interested whats come next!
@ogbullion
2 жыл бұрын
Definitly not one day work! 😉
@CapacitorOverload
2 жыл бұрын
🤔👍
@OnsloVest2 жыл бұрын
Nice!
@OwlTech3332 жыл бұрын
Very nice indeed
@ogbullion
2 жыл бұрын
Thank you! 😊
@refrigelar2 жыл бұрын
O amigo pode explicar que pó foi usado quando o ouro estava sendo aquecido em fogo ? O segredo está nos materiais usados. Isso é mais importante..
@ScrappingIrish2 жыл бұрын
nice video ,was hoping you would get a bit more from 11lbs of chips but any gold is good
@ogbullion
2 жыл бұрын
The magnetic legs are in AP in that moment, they may contain some more gold. 😉 Thanks for watching! 👍
@Denis-Krasnov2 жыл бұрын
А почему молча🤔🤔🤔 а выход получился Шикарный👏👏👏
@lahorigoldsmith85702 жыл бұрын
wao amaizing
@sniffinjoe71402 жыл бұрын
Great video but yield is low. You sure you never lost some in the washes or in AR stage? How about the silver did you not go after it ? I enjoyed the video anyway thanks.
@JohnnySwedishScrapper Жыл бұрын
nice so lets say 1 gram each kilo then ;) great video
@CanadianTreasureHunter2 жыл бұрын
You would get more selling the ram & sticks together $20 Per pound US, How many complete rams was that in pounds?
@ogbullion
2 жыл бұрын
17 kilo or 37 pounds. I paid 16$ / pound. This is my hobby not doing for living/ profit, I do that for fun and expirience.
@CanadianTreasureHunter2 жыл бұрын
Nice video, But yield is low for that amount of ram ic's I think it should be at least 15g or more?
@ogbullion
2 жыл бұрын
Everybody can say any number... but the reality is diferent thing... show me one people on youtube who able to recover 3 gramm / kilo ddr ram chips! Thanks for watching!👍
@hirschkuh2205
2 жыл бұрын
@@ogbullion 3gr/kg would be a dream, but I think 1,5gr/kg is more accurate. I have recovered always 1,5gr from these chips. It can be that you have lost some of your Gold during the washes. I recommend the non acid way even it may take longer. Try to process the ash with a blue bowl.
@bigbasil19082 жыл бұрын
Seems very worthwile doing if you have access to a load of old ddr memory cards for free. The gold looks very high purity too
@chosen1one930 Жыл бұрын
The legs or leads Go into the chips just like other chips
@jasong83772 жыл бұрын
Do you have access to these items or do you purchase for purpose of making video just curious I have such a hard time finding this stuff anymore I used to go out on garbage night and come home with a nice load of e-waste now either people don't throw it away anymore or everyone is now taking it in to recycling centers but I find that hard to believe people are lazy and that would require effort
@ogbullion
2 жыл бұрын
I have a friend who work in a junkyard, thats the secret😉
@jasong8377
2 жыл бұрын
@@ogbullion Nice
@raducatalin63132 жыл бұрын
what is the best way to separate from pcb? The ic cip from.pcb 10xs
@ogbullion
2 жыл бұрын
Heat or HCL.
@chosen1one930 Жыл бұрын
Here's a idea, I wonder if the silicon dies could be sold back to produce new wafers?
@ogbullion
Жыл бұрын
I don't think so, but its perfect for discoball mirrors, or custom jewelry, some of them hide some intresting easter eggs like "bill sucks".
@chosen1one930
Жыл бұрын
@@ogbullion I didn't think so but I've thought of it recently with the silicon shortage. But if you think about it the silicon has already been refined, simple melt to start the new wafer process.
@bananamansgaming8596 Жыл бұрын
Hey did you use nitric acid substitute or was it pure?
@ogbullion
Жыл бұрын
38% or 67% nitric acid
@blackmamba35532 жыл бұрын
great video! does it only work with smb without urea ??
@ogbullion
2 жыл бұрын
I use sulfamic acid to denox the solution instead urea. Thanx for watching!
@blackmamba3553
2 жыл бұрын
thanks for reply. But in video is not used sulfamic ??
@ogbullion
2 жыл бұрын
@@blackmamba3553 not used beacuse I added the correct dose of nitric acid and I don't have excess nitric acid in solution.
@carlogarcia67922 жыл бұрын
good job. are from germany or austria? i can see OBI bucket :)
@ogbullion
2 жыл бұрын
Thank you! No. I'm from Hungary.
@carlogarcia6792
2 жыл бұрын
@@ogbullion ok, greeting from Austria we are just neighbor country! I´m am also a precious metal refiner!!!
@sametilbay57142 жыл бұрын
What is SME
@hirschkuh22052 жыл бұрын
Hello, how did you seperate the silicon dyes after burning without crushing them? Did you handle each DDR chip by hand one by one? I don't see any other option after burning everything grey....Somehow I don't believe what I see in your video
@ogbullion
2 жыл бұрын
Removed with a siev that have enough big holes to catch the dies but not catch the small piece of metals.
@hirschkuh2205
2 жыл бұрын
@OG Bullion Hi, so you don't crush the burned chips at first. After burning you sieve it diectly and hereby avoid the silicon to be destroyed. I am asking because I have realized that if you crush the silicon dyes you will have massive problems with the HNO3. The acid will be consumed from the silica and it takes extemely much more time to finish the process.
@ogbullion
2 жыл бұрын
@@hirschkuh2205 the silica not going to do anything with the hno3... silica only dissolves in HF.
@hirschkuh2205
2 жыл бұрын
@@ogbullion if I heard that before, I didn't believe either, but what I can say from my observations is that if I crush the silicon glass, somehow my HNO3 gets consumed or is "trapped". I keep adding and adding HNO3 and it is reacting and reacting! So, it has to do something with that....
@xx-sm8mt2 жыл бұрын
How do you get this amount of material? You pay people to get their old gadgets or?
@ogbullion
2 жыл бұрын
I have a good friend who work in a scrapyard.
@xx-sm8mt
2 жыл бұрын
@@ogbullion thanks
@mr.g-sez2 жыл бұрын
alles in obi
@hectortello92262 жыл бұрын
Hi bro is true...is gold 22 k.. Very good job bro..
@ogbullion
2 жыл бұрын
The bond wires 24 k 😉👍
@erdalgoktas51812 жыл бұрын
Kardeşimiz hayırlı gunlersayfanizi ilgiyle izliyorum ben türküm bu kullandığınızda kimyasallaritam olarak türkçe yazarsanız sevinirim kolay gelsin
@TheSchmed2 жыл бұрын
All that work for 5 1/4 grams, which is ~$300, is it worth it (energy, materials, TIME) ? Must have taken days to extract all those chips from the boards. If doing for hobby, then that’s good.
@ogbullion
2 жыл бұрын
I do that for hobby / fun. The chips are depopulated with HCL, and not by me with a chisel. Thanks for watching ! 👍
@TheSchmed
2 жыл бұрын
@@ogbullion kinda cool seeing that little button of pure gold.
@cabulingue2 жыл бұрын
what the name of vacum pump U use in this video mate , thanks
@ogbullion
2 жыл бұрын
Yato YT-0673
@cabulingue
2 жыл бұрын
@@ogbullion thanks mate
@ogbullion
2 жыл бұрын
@@cabulingue Your welcome! 😉
@cabulingue
2 жыл бұрын
@@ogbullion mate i didnt seen yield for silver and paladium from those ic batch. are you didnt extract it. or what ?? same as you i did this for hobby but I extract all the metal except iron. 5kg pure Ic its a lot of amount for me. i alreadi extract it too but not pure from ddr ic as i remember the yield is 1,1 gram au, 4 gram ag and 0,6 palladium from 1kg mix ic ram from sdram, ddr 1, ddr2 and some from edo. i extract all part not just the ic
@ogbullion
2 жыл бұрын
@@cabulingue i have not found the silver and palladium, probably separated along with the magnetic stuff, those are still in AP. And i still have the resistors and mlcc's waiting for process.
@6Diego1Diego92 жыл бұрын
and what was the cost of the chips?
@ogbullion
2 жыл бұрын
30$ / kilo
@babablackprajapati36232 жыл бұрын
Bro from where are you
@ogbullion
2 жыл бұрын
Eastern EU
@jackmclane182611 ай бұрын
Oh... I expected about twice as much. What happened?
@ogbullion
11 ай бұрын
Half a gramm/pound is normal for this tipe of IC chips.
@jackmclane1826
11 ай бұрын
@@ogbullion I have to believe you. I'm still collecting stuff... But other videos show significant higher yield. Usually twice.
@sahinsenel8528 ай бұрын
1kg SD RAM'S Cip'lerinden 1,000 Gramm 24 Ayar Altın elde ederiz
@ogbullion
8 ай бұрын
🤣🤣🤣🤣🤣🤣
@hulkkkk2 жыл бұрын
Başarısızlık
@ogbullion
2 жыл бұрын
🤣🤣🤣🤣
@ocipc64552 жыл бұрын
Что такое SMB ?
@ogbullion
2 жыл бұрын
Метабисульфит натрия
@ocipc6455
2 жыл бұрын
@@ogbullion холодный раствор ?
@ogbullion
2 жыл бұрын
@@ocipc6455 да.
@guytelfer13532 жыл бұрын
5g's from 11lbs?
@ogbullion
2 жыл бұрын
Yep.
@guytelfer1353
2 жыл бұрын
@@ogbullion have you tried to process the magnetic material?
@ogbullion
2 жыл бұрын
@@guytelfer1353 no, but I saved them, and I try to dissolve them with AP, maybe contain some bond wires.
@guytelfer1353
2 жыл бұрын
@@ogbullion thx for responding, it's difficult to get responses through you tube
@ampakinetic
2 жыл бұрын
@@ogbullion Sorry what is AP?
@lion94192 жыл бұрын
You skip how you sperate after burning chips kindly shoot that too
@ogbullion
2 жыл бұрын
I used, a kitchen sieve for bigger parts ( silicon dyes /magnetic frames) and a strong magnet for the small magnetic parts (legs).
@frolyar2 жыл бұрын
gold loss ~10%. Use strong solution NaOH for separate ash.
@ogbullion
2 жыл бұрын
Probably. The magnetic parts in AP soultion, maybe there is the loss, i found out later when the magnetic stuff dissolved.
@alexandergottfried73092 жыл бұрын
Kann e auch auf Deutsch ihnen schreiben.mfg Alexander
Пікірлер: 97
digging your content, keep it up!
Very nice job with ashing ic chips especially in separation on magnetic materials and non magnetic you spend time but you save acids 👍👍And very nice yield in gold !! 💪💪
Excellent video!
Good yield and beautiful gold!
I always like this channel.....
Congratulations for u channel
Very nice!
Excellent vídeo my friend
Master... 🥇
Thanks for the video and motivation. I have at least 1 lb. of DDR chips and also some BGA and thicker chips to one day process or have some one toll refine for me. Some recently trimmed fingers as well. I think your DDR yield was good from what I have seen others post.
These 14 minutes looks like at least 14 days.. xD noice job, noice work, interested whats come next!
@ogbullion
2 жыл бұрын
Definitly not one day work! 😉
@CapacitorOverload
2 жыл бұрын
🤔👍
Nice!
Very nice indeed
@ogbullion
2 жыл бұрын
Thank you! 😊
O amigo pode explicar que pó foi usado quando o ouro estava sendo aquecido em fogo ? O segredo está nos materiais usados. Isso é mais importante..
nice video ,was hoping you would get a bit more from 11lbs of chips but any gold is good
@ogbullion
2 жыл бұрын
The magnetic legs are in AP in that moment, they may contain some more gold. 😉 Thanks for watching! 👍
А почему молча🤔🤔🤔 а выход получился Шикарный👏👏👏
wao amaizing
Great video but yield is low. You sure you never lost some in the washes or in AR stage? How about the silver did you not go after it ? I enjoyed the video anyway thanks.
nice so lets say 1 gram each kilo then ;) great video
You would get more selling the ram & sticks together $20 Per pound US, How many complete rams was that in pounds?
@ogbullion
2 жыл бұрын
17 kilo or 37 pounds. I paid 16$ / pound. This is my hobby not doing for living/ profit, I do that for fun and expirience.
Nice video, But yield is low for that amount of ram ic's I think it should be at least 15g or more?
@ogbullion
2 жыл бұрын
Everybody can say any number... but the reality is diferent thing... show me one people on youtube who able to recover 3 gramm / kilo ddr ram chips! Thanks for watching!👍
@hirschkuh2205
2 жыл бұрын
@@ogbullion 3gr/kg would be a dream, but I think 1,5gr/kg is more accurate. I have recovered always 1,5gr from these chips. It can be that you have lost some of your Gold during the washes. I recommend the non acid way even it may take longer. Try to process the ash with a blue bowl.
Seems very worthwile doing if you have access to a load of old ddr memory cards for free. The gold looks very high purity too
The legs or leads Go into the chips just like other chips
Do you have access to these items or do you purchase for purpose of making video just curious I have such a hard time finding this stuff anymore I used to go out on garbage night and come home with a nice load of e-waste now either people don't throw it away anymore or everyone is now taking it in to recycling centers but I find that hard to believe people are lazy and that would require effort
@ogbullion
2 жыл бұрын
I have a friend who work in a junkyard, thats the secret😉
@jasong8377
2 жыл бұрын
@@ogbullion Nice
what is the best way to separate from pcb? The ic cip from.pcb 10xs
@ogbullion
2 жыл бұрын
Heat or HCL.
Here's a idea, I wonder if the silicon dies could be sold back to produce new wafers?
@ogbullion
Жыл бұрын
I don't think so, but its perfect for discoball mirrors, or custom jewelry, some of them hide some intresting easter eggs like "bill sucks".
@chosen1one930
Жыл бұрын
@@ogbullion I didn't think so but I've thought of it recently with the silicon shortage. But if you think about it the silicon has already been refined, simple melt to start the new wafer process.
Hey did you use nitric acid substitute or was it pure?
@ogbullion
Жыл бұрын
38% or 67% nitric acid
great video! does it only work with smb without urea ??
@ogbullion
2 жыл бұрын
I use sulfamic acid to denox the solution instead urea. Thanx for watching!
@blackmamba3553
2 жыл бұрын
thanks for reply. But in video is not used sulfamic ??
@ogbullion
2 жыл бұрын
@@blackmamba3553 not used beacuse I added the correct dose of nitric acid and I don't have excess nitric acid in solution.
good job. are from germany or austria? i can see OBI bucket :)
@ogbullion
2 жыл бұрын
Thank you! No. I'm from Hungary.
@carlogarcia6792
2 жыл бұрын
@@ogbullion ok, greeting from Austria we are just neighbor country! I´m am also a precious metal refiner!!!
What is SME
Hello, how did you seperate the silicon dyes after burning without crushing them? Did you handle each DDR chip by hand one by one? I don't see any other option after burning everything grey....Somehow I don't believe what I see in your video
@ogbullion
2 жыл бұрын
Removed with a siev that have enough big holes to catch the dies but not catch the small piece of metals.
@hirschkuh2205
2 жыл бұрын
@OG Bullion Hi, so you don't crush the burned chips at first. After burning you sieve it diectly and hereby avoid the silicon to be destroyed. I am asking because I have realized that if you crush the silicon dyes you will have massive problems with the HNO3. The acid will be consumed from the silica and it takes extemely much more time to finish the process.
@ogbullion
2 жыл бұрын
@@hirschkuh2205 the silica not going to do anything with the hno3... silica only dissolves in HF.
@hirschkuh2205
2 жыл бұрын
@@ogbullion if I heard that before, I didn't believe either, but what I can say from my observations is that if I crush the silicon glass, somehow my HNO3 gets consumed or is "trapped". I keep adding and adding HNO3 and it is reacting and reacting! So, it has to do something with that....
How do you get this amount of material? You pay people to get their old gadgets or?
@ogbullion
2 жыл бұрын
I have a good friend who work in a scrapyard.
@xx-sm8mt
2 жыл бұрын
@@ogbullion thanks
alles in obi
Hi bro is true...is gold 22 k.. Very good job bro..
@ogbullion
2 жыл бұрын
The bond wires 24 k 😉👍
Kardeşimiz hayırlı gunlersayfanizi ilgiyle izliyorum ben türküm bu kullandığınızda kimyasallaritam olarak türkçe yazarsanız sevinirim kolay gelsin
All that work for 5 1/4 grams, which is ~$300, is it worth it (energy, materials, TIME) ? Must have taken days to extract all those chips from the boards. If doing for hobby, then that’s good.
@ogbullion
2 жыл бұрын
I do that for hobby / fun. The chips are depopulated with HCL, and not by me with a chisel. Thanks for watching ! 👍
@TheSchmed
2 жыл бұрын
@@ogbullion kinda cool seeing that little button of pure gold.
what the name of vacum pump U use in this video mate , thanks
@ogbullion
2 жыл бұрын
Yato YT-0673
@cabulingue
2 жыл бұрын
@@ogbullion thanks mate
@ogbullion
2 жыл бұрын
@@cabulingue Your welcome! 😉
@cabulingue
2 жыл бұрын
@@ogbullion mate i didnt seen yield for silver and paladium from those ic batch. are you didnt extract it. or what ?? same as you i did this for hobby but I extract all the metal except iron. 5kg pure Ic its a lot of amount for me. i alreadi extract it too but not pure from ddr ic as i remember the yield is 1,1 gram au, 4 gram ag and 0,6 palladium from 1kg mix ic ram from sdram, ddr 1, ddr2 and some from edo. i extract all part not just the ic
@ogbullion
2 жыл бұрын
@@cabulingue i have not found the silver and palladium, probably separated along with the magnetic stuff, those are still in AP. And i still have the resistors and mlcc's waiting for process.
and what was the cost of the chips?
@ogbullion
2 жыл бұрын
30$ / kilo
Bro from where are you
@ogbullion
2 жыл бұрын
Eastern EU
Oh... I expected about twice as much. What happened?
@ogbullion
11 ай бұрын
Half a gramm/pound is normal for this tipe of IC chips.
@jackmclane1826
11 ай бұрын
@@ogbullion I have to believe you. I'm still collecting stuff... But other videos show significant higher yield. Usually twice.
1kg SD RAM'S Cip'lerinden 1,000 Gramm 24 Ayar Altın elde ederiz
@ogbullion
8 ай бұрын
🤣🤣🤣🤣🤣🤣
Başarısızlık
@ogbullion
2 жыл бұрын
🤣🤣🤣🤣
Что такое SMB ?
@ogbullion
2 жыл бұрын
Метабисульфит натрия
@ocipc6455
2 жыл бұрын
@@ogbullion холодный раствор ?
@ogbullion
2 жыл бұрын
@@ocipc6455 да.
5g's from 11lbs?
@ogbullion
2 жыл бұрын
Yep.
@guytelfer1353
2 жыл бұрын
@@ogbullion have you tried to process the magnetic material?
@ogbullion
2 жыл бұрын
@@guytelfer1353 no, but I saved them, and I try to dissolve them with AP, maybe contain some bond wires.
@guytelfer1353
2 жыл бұрын
@@ogbullion thx for responding, it's difficult to get responses through you tube
@ampakinetic
2 жыл бұрын
@@ogbullion Sorry what is AP?
You skip how you sperate after burning chips kindly shoot that too
@ogbullion
2 жыл бұрын
I used, a kitchen sieve for bigger parts ( silicon dyes /magnetic frames) and a strong magnet for the small magnetic parts (legs).
gold loss ~10%. Use strong solution NaOH for separate ash.
@ogbullion
2 жыл бұрын
Probably. The magnetic parts in AP soultion, maybe there is the loss, i found out later when the magnetic stuff dissolved.
Kann e auch auf Deutsch ihnen schreiben.mfg Alexander