Did my first attempt at this today on my SUV, about 6 door dents, took me about 7 hres but the result is satisfactory and can't wait to see the result under day light tomorrow. 🤞. Thanks for this super interesting demonstration.

@denttime

Жыл бұрын

Sure. You should also check out my tutorial website denttrainer.com thanks again

@floorpizza8074

Жыл бұрын

How did it come out?

Super nice video Myke! I'm having very good luck with the reaper tabs too. They stretch when I get a really hard pull but they do the trick! I'd rather stretch a tab than fuss forever with a stubborn pit.

Thanks. Really like your demonstration. I had a try earlier before your video and was a bit disappointed. But I feel I can keep trying.

Excellent demo. Thanks

Awesome demo, tutorial, and edit Myke! 🔥💯

@denttime

2 жыл бұрын

Thanks Joe Dentevo.com 👊

That was a great demonstration

Thanks for sharing I learned so much.

Thank you so much, I think you helping people with gaining more knowledge in that industry thank you so much for the good deed

@paulc80

2 жыл бұрын

Clean the surface with alcohol and let the glue dry for a few minutes. I’m just learning myself but I’ve figured that out so far. Also, put the glue on the tab and the dent!

Very nice job..greetings from Italy

Thank you Myke for the demo, I was thinking about buying them

@denttime

2 жыл бұрын

My pleasure. Thanks for checking the video out. 👊

You are an amazing artist. Thanks for posting your videos.

@denttime

7 ай бұрын

Thank you! Cheers!

Show 👏🏼👏🏼, parabéns pelo ótimo trabalho, saudações do Brasil 🇧🇷 🙋🏻‍♂️

awesome video, can you please share the link to the light you are using during this task. thanks in advance!!

that’s some impressive work

This is so professional

Man this is a great video.

Im so hooked on these vids. Imma learn this shit, looks so satisfying

@denttime

2 жыл бұрын

You’ll love denttrainer.com then 😉

دسخوش استاد دسخوش به سخاوتت

You are professional 🎉

Exellent bro, absolutely Exellent

Great content. Very thorough and helpful techniques. Very positive energy. Thank you

The glue looks so good when removing it. By the way, what kind of material are the TABS made of?

Perfeito!!! Mesmo não entendendo a língua consegui entender as ações!!!!!! Se puder queria comprar um luz com esses efeitos.....grato Brasil

Good job, I wondered if you could show, how the technician could decide the right angle when installing the LED light? Moreover, do all LED lights give the same showing or is there a different type of it? how could I select the best one among them, If I would like to buy it?

Very nice work

@denttime

2 жыл бұрын

Thank you. Appreciate it.

Flipping amazing bro 🙌 👏 👌 🔥🔥🔥🔥

@denttime

Жыл бұрын

Thanks 🔥

Como y donde puedo comprar sus productos? Gracias por los videos

Amazing!

thank you so much for shareing

very good i subscribed

Where can I buy the reaper tabs at. Great video thanks, never mind I watched your video again and you told where to buy supplies. 👍

@denttime

Ай бұрын

Dentreaper.com thanks!

Excelent!!!

nice job

@denttime

20 күн бұрын

Thanks!

Nice work

@denttime

9 ай бұрын

Thank you! Cheers!

Thank you nice video

@denttime

Жыл бұрын

Glad you liked it

Which spray did you use to remove the glue?

Good job🇪🇸🇧🇷🇺🇸🌎

I need that kind of pdr lump

Perfect 😎

How much would it normally cost for someone to do just one of those dents on a car door? Is there a specific glue you would use on a thinner paint car like a subaru WRX?

Ue are you using by chance?

Awesome

Where can I get that reflection lights that shows the lines on the paint?

@SswearFrmBkSs

7 ай бұрын

Did you figure it out

@vegitoblue7908

7 ай бұрын

@@SswearFrmBkSs yes. Thanks

I need help desperately...I've tried and tried and I just can't get the tabs to stick.. I've done everything exactly the way your showed in video's but the first slight pull and it pops off

@kcjones2737

2 жыл бұрын

Same problem bro. Especially in warmer weather 🤷🏻‍♂️

Excellent work, where can I buy such a lamp? with stripes

@denttime

2 ай бұрын

Ansonpdr.com stuckeytools.com and UltradentTools.com

Good

The light seems similar to an optical flat, what is it called please?

I pulled a dent out almost to perfection... Then I decided to pull once more and created a bubble... Smh. Any idea on how to fix this

tried to glue pull some dents, pretty successful but not quite there, Tequila glue and reaper tabs small dents and pulled 6-8 times and still not all the way. Hood temp is 70 degrees, I am outside and can't get them all out, about 20. Looks way better but only about 80-90% good.

Thanks🇪🇸🇪🇸🇪🇸

Hello what is the model of your lamp thank tou

@denttime

2 жыл бұрын

Elimadenttools.com

Greatttt

My uncle from north Idaho (DENT HUNTER- Rob Weaver ) completed dent wizard training and is done with his no compete contract and is now chasing hail all the way from Colorado to Idaho. I followed behind him for a year watching every move he makes while he marine corps style explained everything. Finally at 30 years old I’m hooked and want to fully get into it. My only problem is there is no school near me. Closet one is over 3 hours away. With twin girls, wife, and bills a move just isn’t in the picture. What else could I do to get more advanced and become a “technician”? I’m in Northern California

@VanishingNomad

Жыл бұрын

Go to the junk yard, buy a junk hood and start practicing.

@elmiewho29

Жыл бұрын

@@VanishingNomad exactly what he said. Practice makes perfect.

@Pap3rPlanesss

Жыл бұрын

Also from Nor Cal, sucks how every class is more down south! Turning 30 in a couple month

@floorpizza8074

Жыл бұрын

I'm fairly certain that KECO does on site training.

@denttime

11 ай бұрын

Sign up for DentTrainer.com and when you’re fully committed get some personal PDR training. If you’re serious you’ll find a way to get good training even if it’s far. Otherwise you find an excuse. PDR is hard to lear but it’s worth it if you’re the type who is passionate about it.

do you recommend heating up the surface after the alcohol cleaning?

@denttime

6 ай бұрын

Absolutely

Perfeito!

Quindi il martelletto lo uso quando il bollo esce troppo, colpisco seguendo le linee fino a raddrizzarle? Il martello si usa solo per sporgenza quando ho tirato trnppo il bollo?

Bro how is that glue setting up that fast?

Can you use this same technique on aluminum?

@denttime

Ай бұрын

Yes indeed.

Scares me doing this because I once pulled the paint off the dent, so it went from a quarter size all the way up to a 3" disaster, no joke... I have a Challenger also and knock on wood I have no dents yet but the day I do, you know damn well I'll be pissed. I have the amazon puller and tabs of what your using.

muito top parabens

What mm was that tab?

What chemical does the bottle have to remove the glue?

@denttime

2 жыл бұрын

91% alcohol

OI MEU AMIGO TUDO BEM COM VOCÊ SOU DO BRASIL TO APRENDENDO MUITO COM VOCÊ VEJO TODOS SEUS VIDEOS ESSE VÍDEO QUE EU ESTAVA ESPERANDO COM VENTOSA FAZ MAIS VÍDEO COM VENTOSA PORQUE TO COMEÇANDO AGORA E NÃO TENHO TODAS AS FERRAMENTAS AINDA AQUI É CARAS AS FERRAMENTAS NÃO TENHO DINHEIRO PARA COMPRAR MAIS TO COMPRANDO AS POUCOS OK MUITO OBRIGADO DEUS ABENÇOE.

Does tapping ever leave small marks on the paint?

@denttime

Жыл бұрын

Yes but not permanent

Ain’t Mike Toledo productions 😂😂😂😂😂😂

❤❤❤❤❤

❤💪❤️

does glue scrape off the paint ?

@denttime

10 ай бұрын

No, but occasionally it can pull paint.

Hi! in order to take the course, don't you need the tools first. Please let me know how much the tools cost so i can't buy it later on near future please, including the light system. Thanks in advance.

@denttime

Жыл бұрын

Actually, you’ll want to watch the course first because that’s what it’s about initially is about purchasing tools and how to use them. The most common problem people do when they first try to learn PDR. Is they buy tools that they don’t know how to use or understand. On Denttrainer.com.you’ll see the foundation from step by step. Start with the main course called Ground Zero Pdr Training. You won’t regret it, and you’ll save lots of money, including tool discounts for the tools that I mentioned. Good luck. Thank you.

when tapping down are you on the line our in beteen

@denttime

20 күн бұрын

On the line. Thanks

Kinda messes with the clear coat but way better than a dent I gotta get my car done

Decent video I like how you went into some detail about the tabs but if you have any type of expensive car the owner will lose his mind if you stick your alcohol magnet on the paint. Just fyi. Coo video tho.

@denttime

2 жыл бұрын

Thanks but you should see when we have to tap down on the paint 😉

landscape recording please... but helpful vid regardless

@denttime

2 ай бұрын

I film only portrait mode now. Thanks

👍👍♥♥♥

Good work but i think it would save u some time if u didn’t pull that hard with the puller, i did the Same thing and i found quickly out that it made the process longer, what i did was massaging the rigger slowly until i saw it was far enough out to massage it back to its place

@kimkallestad3017

2 жыл бұрын

Hope it is a good tip if u haven’t found it out yet ;-)

@savage6394

5 ай бұрын

So, in the second 1/2 of your suggestion you recommend doing exactly what you recommend not to doing in the first 1/2. Pull it “far enough OUT to massage it back to its place”.

@savage6394

5 ай бұрын

Which, funny enough, is exactly what is show in the video.

🇧🇷🇧🇷🇧🇷👍🏻👍🏻👏🏻👏🏻👏🏻

Try that on an old car wouldn't work only on these thin skinned junk we have nowdays

@denttime

Ай бұрын

Indeed PDR works on older cars. Watch my other PDR videos on the classics. 😉

GO tell DING KING that fog lights are not better!! Its more complicated to read a high and low spot among a dozen different Highs and Lows, Than it is to read some lines being expanded or pinched!!! Then again.. Im probably autistic. Ive never done a test (nervous laugh)

You talking too much bro

@denttime

9 ай бұрын

The biggest communication problem is we do not listen to understand; we listen to reply. 😉

All this is teaching me is that you need expensive tools to do it well. There's zero skill involved here. Your results are only as good as how much you shell out for tools.

@denttime

9 ай бұрын

Yeah Eisenstein. You’re completely right. That must be one of the most ignorant comments I’ve read. I bet you don’t even know how to fix a sandwich.