Gas Mask for Dummies - CBRN
Тәжірибелік нұсқаулар және стиль
When I got my issued "gas mask" in the German Bundeswehr, I took a closer look at it and was a bit scared. Since the bottom opening is just sealed with a small rubber piece. So if this piece does fail or is missing, the gas will come to the inside of the CBRN mask.
I am not an expert on chemical threats or protection against them. But I want to share some experience I had with this mask and will do a CBRN for dummies explanation.
If you want to buy a mask, that you can use. Better do not buy cheap or surplus masks. And also invest in a suitable filter. But if you need a mask as a civilian, is up to you.
For military and law enforcement it should be clear. So this video is not meant to be for you, guys. I am sure you know how it works and if you need one.
The Mira Safety CM-6M Mask I wear in this video:
www.mirasafety.com/products/c...
The Mira Safety Filter I have in this video:
mirasafety.com/products/cbrn-40mm-gas-mask-filter-nbc-77-sof
The shooting range in Austria, where I did the shooting:
edelweiss.world/
Пікірлер: 19
Hey man, your videos are great. Keep it up. Hello from the USA
I could listen to you talk all day LOL
It's worth mentioning to write down on training filters TRNG or something similar so you know that they are for training only. You should also mark used unes.
@ripperkon
Жыл бұрын
That’s a good addition. Thx. I will indeed do that.
@krisstac2000
Жыл бұрын
@@ripperkon I recommend to use white oil marker so it's easily visible and resistant
Freut mich wirklich dass du auch mal nen Video zu dem Thema bribgst 🙌🤘
@ripperkon
Жыл бұрын
Es war auch wirklich interessant sich noch mal freiwillig und in der Freizeit mit der Thematik zu befassen. Da kann man da noch mal ganz anders rangehen als z.B. im Dienst.
Interessantes und bisher wenig gehandeltes Thema. Top Video!
I'm still confused as to how the exit valve would protect you. Once the pressure inside the mask is the same as the outside, I can't see what would make the valve stay sealed. Is there a spring holding it in the closed position, or something like that?
@ripperkon
Жыл бұрын
That’s the scary thing. It’s just hold tight by the construction of the rubber. Seems like that’s enough to seal it, when inside and outside pressure is the same.
@user-ti7iv5um5t
Жыл бұрын
@@ripperkon Приветствую! Хочу задать вопрос! Вы пользуетесь хребтом virtus ( распределения веса бронежелета) если да то как охарактеризуйте его! Спасибо!
@planetcaravan2925
7 ай бұрын
@@user-ti7iv5um5tslava ukraini
@planetcaravan2925
7 ай бұрын
While inhaling u cause a vacuum
What magnifier mount is it on the Umarex?
@ripperkon
Жыл бұрын
A replica of the unity tactical mount.
Maybe a haircut and shave. Would go good. With that gas mask, and equipment. Lol Thanks for the video. Cheers 🍻
Im Ernstfall rettet eine Rasur Leben.