Thanks Ernest, surely saves a lot of time! And definitely saves the thread with modifying something everytime. Just watched your video on tungsten hammer! Everything done on my gun is thanks to you. My life would suck without FX Masterclass!!!

Awesome and informative video as always! Thank you!

Excellent info, Ernest. Now that I have an Impact M3, I need to learn all the tricks to keep it running like it should

Great video Ernest, as always I get a lot of Knowledge on FX impacts from your videos. 👍👍👍

Very well done, I'm ready to do mine. Thanks

Great video I found it very instructional. I literally followed it while I was doing the actual procedure myself. Thank you.

You are the Man my friend!!! Best regards from Portugal 🇵🇹👊

Awesome Ernest yup that's how I do it every since I got my first fx mk2 25 I was always trying different springs and weights so it's easier like that for me thanks for sharing bsafe buddy 👍

Great and thanks for sharing it with us...

My congratulations always on and wishing you much more success fan of Brazil who admires is passionate about this work of art and I'm happy for you on this path to prosperity like guaranteed always

merci pour cette vidéo un vrai pro vous ete la seul personne a qui je fait confiance grand merci d un papy de Normandie (FRANCE)

Always the best 👍🏻

Awesome!

👋🏾sup brAh! Good info my braddah🇵🇭👊🏾😎

Доброго времени суток ты молодец высший класс

👍👍

Great tip Earnest thnx. On one of you're earlier videos, how to change the transfer port, you had a small round hole opposite the bridged slug square hole, what is the little round hole for?....

Nice one Ernest I always look forward to your new vids…. Yea that’s a brilliant idea in your vid.. The next time my gun is apart I am going to modify the cocking block so that I can back off the pin from above. I am going to turn down a grub screw on the end to the size of the pin that goes against the hammer then drill a pilot hole all the way thro the cocking block then open up the hole from above but not all the way thro then tap it out to the grub screw size The drill the top plate to get access to it Will you do a vid on how to tune for heavy slugs on a power block version please sir😁 Wayne from South Wales 🤝

@2cthetruth

Жыл бұрын

If you were from north Wales, we could get together and make some delicious brownies!

@bikerboywayne1

Жыл бұрын

@@2cthetruth I spent a weekend up ur way on angelsay I had a lot of fun with you Gog’s 👌👌

Earnest, I have an M3 with a 600mm barrel in .25. I was hoping to make around 80fpe with it for long range ground squirrel shooting. It's not happening. Do you think they tungsten hammer weight will improve my speed/energy with only running the 600mm barrel? I know they say it works good with the 700mm or longer barrel, but currently they are not available and I need to run this 60mm barrel for awhile anyway. Thanks

Hola desde Argentina le quería consultar que distancia recomienda usar el c1 ? Caño 600mm

Ernest question for you. Recently upgraded my MK-II to the power block. Should I keep the valve spring from the slug power kit or use the power block spring? The slug power kit spring seems almost too light for the new power block. I’m shooting NSA 38gr

@ernestrowe5061

Жыл бұрын

Keep the same valve spring

Could you do a video showing how to fix a leak from the front reg? I had a problem from there and I had to send out my gun to UA for repair. But, I want to learn how to do these repairs and maintance myself.

That's a good way of doing things man ⭐⭐⭐⭐⭐ . Show us a good way of tuning the rifle that is not main stream 🌜🌝🌛

Where can I buy one of those C3 tools?

Hi Ernest, i have a question did i get it right? The Macro wheel is on 1 and the measurement of the outstanding rod is 5.5 mm or 6.5 mm? every one is speaking about 6.5 mm that is a little confusing maybe you can helo me out thx in advance Br. from Austria

Hello, sir So that power can be maximized, what needs to be upgraded?

I'm confused, is that a 13.5gr hammer weight? What set up would benefits from that compared to the tungsten hammer?

@ernestrowe5061

Жыл бұрын

Custom 285gn 80/20 tungsten 18.4gr

@KevinWood44

Жыл бұрын

@@ernestrowe5061 Do you sell these? 910?

Why do they say not to fire it when there's no gas. I accidentally did it while degassing my rifle. What should I check for damage?

Olá pode me informar o modelo desse bipe?

Fx MK2 has low wind power, how to fix it?

Hey Ernest, yesterday I swapped my hammerweight and now it won't cock? Any ideas what it could be?

@microsoftchad

Жыл бұрын

It is the huma air .35 cal slug power kit heaviest hammerweight, I also put the 2 washers on it. Last night it would only cock at certain hammer settings. Doesn't seem to cock after pulling it apart again and reassembling.

@ernestrowe5061

Жыл бұрын

@@microsoftchad start at PW 8 and work yourself up till unable to cock and that’s your limitation. With thicker head you will bottom out the spring then the sear won’t engage

@microsoftchad

Жыл бұрын

@@ernestrowe5061 thank you, I'll give it try soon. I was on the lowest settings still from the install.

@microsoftchad

Жыл бұрын

@@ernestrowe5061 pulled it apart and put it together, it started cocking now. I see what you mean by the preload changes based on the hammerweight. I put one in that still let's me access up to 16 on macro and 5 on micro, but can't go 1 click past 5.

Ernest where can I get that C1 tool at?

@ernestrowe5061

Жыл бұрын

Hi, at 910airguntuningandrepairsllc.com

@turbojack6

Жыл бұрын

@@ernestrowe5061 Thanks allot

Where'd you get that bipod!

@ernestrowe5061

Жыл бұрын

Amazon 3 years ago $45

@2002ZRX1200R

Жыл бұрын

@@ernestrowe5061 I have several black ones like it, but I want one that color!! Lol.

Hello !! I have a problem with my impact M3 Can You help me please ?

No thread lock Ernest will it not back out over time 🤷‍♂️

@ernestrowe5061

Жыл бұрын

Hi, C1 and rod jammed tightly I haven’t seen one back out in hundreds of disassembles. U Will probably taking off the C1 for maintenance before c1 loosens by being shot.

@arubino19

Жыл бұрын

Mine on my m3 compact backed out after a month of it being new. It was so loose I was able to unthread it by hand without any vice grips. Same thing happened on my mk2 a few years ago. There is a high probability of these coming loose, especially if you’re shooting at high powers. I’m going to make a point when I get a new impact to just right of the bat set my c1 where I want it and to apply some loctite to save headaches down the road. I hope when the m4 comes around this whole part is redesigned where it’s impossible to come loose.

What's your website?

Hi Ernest, My Impact suddenly "lost power", it is shooting the 21gr Javelins only at 650-750 FPS now..., ...without any true reaction on min or max at PW. Before that 940-950 FPS without problem. No leaks, no visible malfunction, reg approx. at 145, VA fully open. I've read somewhere the issue could be that the c1 is backing out. What do you think about it? Have you something like that before? Thank you for your time and effort! BR Peter

@realblakrawb

Жыл бұрын

Open and look.

Unit impian