Would have been interesting to see how recovery times were affected with the different stacks.

thanks, I've been dealing with lack of pressure on my Maverick, was told by FX USA I needed to add more washers, up to 13. Going to resize and cascade down to 10 or 12. Give that a try.

Perfect work. Well thank you. You saved me a lot of time tuning the regulator.

great job erd! no one explores the working of an air rifle like you do. never stop asking “why”!

Damn man what a great video once again Ernest you hit the nail on the head

Thank you I’ve been wondering about this for so long 👌🏻🤙🏻😍

Awesome video with a clinically great detailes and thanks for shared it with us👌👌

excellent video - scientific & entertaining at the same time - please keep them coming !

@ernestrowe5061

Жыл бұрын

Thanks !

Great video! Teresa and I have mk2 s and mk3s .. we've installed your short cocking handle but need more for the m3s.. please keep your innovations and secrets coming!!! We've even put hot glue between the plenium and the grip for more comfort 😆 We've been addicted to your upgrades for the years now

you are the go to man for FX Airguns😉

Something I've always wanted to know, but did not want to blow the reg up. Another great video. More please.

@ernestrowe5061

Жыл бұрын

Sure thing, will cover all aspect of repair and tuning

@ernestrowe5061

Жыл бұрын

I don’t think you will blow up the rag maybe an O-ring or two the Plenum is rated at 300 bars so it’s safe there. Thanks.

Thank you Ernest for the detailed videos, I learn a lot from watching you through the years, maybe some more on the FX crown also!!!!

merci pour votre patience et surtout votre professionnalisme très cordialement un papy de Normandie qui vous kiff 🤣🤣🤣🤣

Thank you, this is exactly what I needed

Great vídeo my friend!!! Thanks for share that infomation!!🙏 Best Regards from Portugal my friend 🇵🇹💪

@ernestrowe5061

Жыл бұрын

👊

Great video Ernest thank you 👍

Thanks Ernest I really appreciate it because I wanted to know how high I could go with my reg Thanks for sharing bsafe buddy 👍

@ernestrowe5061

Жыл бұрын

Great hearing from you, Chris

@chrisfigueroa3361

Жыл бұрын

@@ernestrowe5061 I have a problem Ernest my first reg is leaking its a very slow leak atmosphere hole I changed 0ring on adjustment screw but I think its coming from the inside one the 4×1.5 or the other one that's on the piston 0ring that goes in the back its also a 4×1.5 either one of those three I tried the I have a caption 0ring 2×1 ,4×1.5 but I can tell the 0rings imo from caption 0ring are shit very flimsy easy to put on not like the original FX ones so I know it's those all rings that are leaking just had a chat with fxusa and they're going to send me out some o rings I guess the weather will do that to 0rings from very hot outside to cold weather will have an effect on all rings just my opinion

Another awesome video!!!

Great information. Thanks Ernest.

@ernestrowe5061

Жыл бұрын

Thanks Johan 👊

Very helpful! Thanks for sharing!

Nice informative. I'm interested in the 1st regulator. Setting the regulator at 150, then dry fireing how to speed up the reset to 150 again which spring configuration is the quickest.

Thank you for this!!!

great vid ... would like to see one on the mk2 (stock equipment config) ( on how to get it higher) ... i could not get it above 145 bar without it starting to leak

Nice, I was wondering how much of a difference it would make to change up the washer stack.

Is it necessary to replace both the front and rear reg pistons to the new brass ones to achieve these higher pressures?

Great video Ernest! Could you tell or make video if number of spring washer's or configuration of them makes any difference for the regulator refresh rate?

@ernestrowe5061

Жыл бұрын

That’s difficult to do in a video but the best thing you can do is have a consistent shot Two shot timing so you’re refresh rate is very consistent. Or time you’re shot to shut in three seconds or five seconds or 10 seconds you’ll see a graft of the extreme spread in that will determine the refresh rate.

Great test

@ernestrowe5061

Жыл бұрын

Thanks Doug, I think I could’ve done better. We’ll make up on the next video.

Hi Ernest! Would make a video on regulator slow recovery on the impacts, new M3 or upgraded old models. Thanks!

Thanks for the Great Video ! Where can I buy a reg removal tool like you use in your videos?

@ernestrowe5061

Жыл бұрын

I don’t make those anymore but newman at 910airguntuningandrepairsllc.com Make a high quality aluminum rag piston puller

Hi Master I hope you are doing great.! My question for you is why if I setup my impact mk2 regulator at 140 bar after 30 minutes o 1 hours it will be at 150 o so? Please can you help me with that? And keep it up you are the best so far thanks very. Billy

Hi Ernest, the best. I am glad you are doing so much for us with all your videos. Please help me. I am desperate as I am stuck with my Impact MKII; since 7 days I can't use it. My problem is I can't reach 150Bars into my plenum, I installed the regulator 11washers, regular set up )()()()()() but even opening quite much the set screw I can not reach the 150Bars. Why? If I unscrew more the regulator set screw it vents and blow out all the air of the plenum. Can someone help me? Many thanks guys.

Do you already demonstrate what happen when you screw clockwise a regulator under pressure in a other video?

The technical videos are pure gold! Anyone can make a hunting vid. but for the rest of us, show how to get these impacts to shoot precise. suggestion. make a video of an impact from the box to sub-MOA precision tuned & efficient with the aftermarket parts like pin probe kit, tungsten hammer weight, barrel tuner, spring/ball combinations, polishing Etc. Show us the complete setup and how to get there and you'll have a video that will constantly collect views.

@ernestrowe5061

Жыл бұрын

Well, it’s totally impossible to get that in one video, but short videos till you get sub MOA has already begun will try to get one or two videos a week in advance tuning

@rockyourfaceoff2

Жыл бұрын

@Ernest Rowe Oh yeah! One video won't cut it but an Accurizing series could. I figure if anyone is up to the challenge, it'd be you. 👍🏻

@rockyourfaceoff2

Жыл бұрын

You should machine larger than a 72cc plenums and test the power potential and efficiency of them. Fx has been increasing the plenum size over the generations for a reason. Maybe they haven't gotten it quite there yet.

This was such a great detailed video. Good testing and results shown without BS. Any idea what is the maximum pressure the plenum is rated for?

@rockyourfaceoff2

Жыл бұрын

curious about the max pressure myself.

@ChrisHarris4U

Жыл бұрын

i think it is rated to at least the bottle pressure of 310bar

@oniminus

Жыл бұрын

@@ChrisHarris4U That would be my guess as well, but would be nice to get proper info about it

@ernestrowe5061

Жыл бұрын

The Plenum is rated as much as the carbon fiber bottle 😊

I just got a rear reg rebuild kit from Utah Air where I bought my rifle. the stack they sent me has 13 washers. Does that sound right? I haven't taken my reg out to see what is in there now.

Keep making more

@ernestrowe5061

Жыл бұрын

Definitely will cover a lot of tuning pointers videos. It’s endless.

Olá, esse pilhamentos das molas da na primeira reguladora da Fx m3?

What is the button valve you have on the fill line please?

always spectacular videos like guaranteed always from your fan from Brazil 🇧🇷 if you could give infinite likes I wish you a lot of success and happiness

@ernestrowe5061

Жыл бұрын

Thanks Francisco Iappreciate that 😊

@franciscocarvalho2424

Жыл бұрын

@@ernestrowe5061 was happy for your success I'm passionate about this sport and this wonderful equipment that you developed always wishing you much more success is like guaranteed always

What does cup facing up mean? Is the the curved part facing go up or the dipped part? I’m so confused

Nice

Thank you!👍👍👍👍👍👍👍👍👍👍😎😎😎😎

@ernestrowe5061

Жыл бұрын

👊👊😊😊😊👊😊😊👊👊

I dont own an fx airgun but i have a question to make if you are able to answer me. I have a 15-20 bar difference on my regulator as the pressure of the tank drops for example at 230 my reg show 135-140 and as i go down like 190-180 bar the reg drops at about 120-125 bar. From your experience what do you think is the problem and what the possible fix? Thanks a lot in advance!

Hi Ernest ,I have a question for you,can you put a slug liner in a smooth twist barrel ? Cheers Dean

@ernestrowe5061

Жыл бұрын

Hi Dean, yes u can as long same length and caliber. So many options in twist rate available

@deanmorriss2369

Жыл бұрын

@@ernestrowe5061 thanks Ernest for your reply 👍

I checked the thickness of my washers the thickest one was .60mm then the rest were 47 then 36 freaking skinny ass washer but they work I have my reg at 170 bar

At 210bar would the hammer still open the valve constantly I’d like to see you shooting it and see the speeds as the South African boys don’t recommend it over 180bar and there pretty good on tuning there impacts

@woogieman02

Жыл бұрын

Put a heavy weight tungsten hammer in it and you will be fine

@ernestrowe5061

Жыл бұрын

Yes, to overcome 180 bars and above, you need a heavy tungsten weight and a custom spring. And yes, I know Matt Hein, and Ralph they are my coworkers.

Thanks Ernest. Great info. I was told not to run the reg on an M3 past 180bar. Is that about the top a person should run it? I would like to hear it from the master...

@ernestrowe5061

Жыл бұрын

Hi Frank, Manuel states 175 bars is the limit for warrantee, purpose, the hammer weight and standard spring maximum usage is around 160b- 170 bars beyond that it will not fully open the valve fully and your speed will be lower. You need a tungsten weight to overcome the higher rag pressure. lots of shooters with a modified impact with my kit used 190b to 210 bars with no issue but doesn’t mean you have to use that much rig pressure.

@bigfranksworld

Жыл бұрын

@@ernestrowe5061 Thanks for the reply, Ernest. What "kit" are you referring to? Really appreciate the info!

@ernestrowe5061

Жыл бұрын

@@bigfranksworld -> kit heavy tungsten with custom spring

@bigfranksworld

Жыл бұрын

@@ernestrowe5061 just bought the Huma hammer weight set and high power spring. Hope it works for me, if not, then I'll check into the tungsten weight. A couple of people said that the tungsten might be too much weight, and I would loose some tunability with it.

@bigfranksworld

Жыл бұрын

@@MasonStormSunny Hoping that is the deal. Should know here soon.

Ernest great video but I need your tool to pull the reg out where can I get one? Pleeeees😢

Nothing like real-time for those "not" in a hurry...

Hi. Here's an idea for your new Video. Can you please build Sub 12 Impact from one that was messed with. I bought second hand MK2 that is completely out of spec and I don't know where to start. Please include Hammer weight, Bellevue washers thickness and number, springs wire diameters. Sorry but I need help. Regards.

Hello Sir, plizz make a video of how to set up fx m3 .77 to used jsb 13.43 gr pellets.

Can you have a video about fx maverick max tuning?

@ernestrowe5061

Жыл бұрын

Sure thing it’s on my list. Have a great one.

Bạn vui lòng cho biết chất thép của lò xo đĩa này là gì không, cảm ơn!

Don't stop

Olá eu sou dos seus vídeos, já vi vários , e gostaria taria de compra uma valvula reguladora da FX onde eu posso comprar você poderia me informar?

Ernest I can't get my first reg gauge to be up right it's freaking side ways wtf do I need to use the brass ring or can I just use the 0ring or can I put 0ring inside where the gauge goes I just got a delete kit from saber tactical I'm doing g away from the first reg I did fix the leak I had by adding an extra washer but anyway how do I get my gauge up right my friend dam

@ernestrowe5061

Жыл бұрын

Use a thicker oring inside the brass ring - will gave u more rotations to zero the gauge

@chrisfigueroa3361

Жыл бұрын

@@ernestrowe5061 ok thanks 😊

Why don't you have subtitles?

@ernestrowe5061

Жыл бұрын

It’s so time-consuming on long videos on shorter videos, will try subtitle in English