ERD bulletCentral FX Impact precision magazine review
Жүктеу.....
Пікірлер: 50
@Maloneranger0311 Жыл бұрын
Outstanding! On waiting list for one right hand .35 cal. Glad I’ve put off waiting to order a second one
@FreeFarmPestControlUK Жыл бұрын
wow 🤯 I really hope that you guys have made 10s of 1000s of these because I reckon these will be extremely popular 👌 👏👏👏 very nicely done indeed!!
@Crazyhorseracing461 Жыл бұрын
I like. I’m so happy someone finally made a left handed make. After all these years 👍👍👍
@franciscocarvalho2424 Жыл бұрын
another success was dreaming happy for you like guaranteed always here in Brazil 🇧🇷
@FodzyleGEEK Жыл бұрын
Hello Trouble with the kit tensioner. to fix the carbon tube of the kit you have to screw the bolt at the end of the barrel on the screw that holds the liner. But these screws that hold the liner and the carbon tube are tight, the slugs go all over the place, there is no more precision. Ernest Rowe shows us how to tighten the tensioner kit but tightening the kit tightens the liner screw and we lose precision. It would take a stop for the screw that holds the liner. Do you have a solution ?
@milkybaravenger Жыл бұрын
It would be nice to have a magazine that could hold more than ten 40g slugs without the spring failing. Do they have some extra space for longer slugs?
@richoperezinho72152 ай бұрын
@ernest in .22 what is the most bigger slug that can operate..? 40 grain.? Or just 34 grain.?
@MrBad4fun Жыл бұрын
Ernest, I thought in your opening, you mention Bullit Central making left handed magazine..?? Where and when will the left handed magazine be available..?
@kirbysands31977 ай бұрын
Hey Ernst. Like the video on that new Bullit Central left and right-handed magazine. When will u do a video of the installation of the plate to make the left-handed magazine work on the m3? Really get a lot out of your videos.
@59dojomo Жыл бұрын
Can not find a .30 caliber 700 mm barrel kit for my FX Dreamline... Does anyone know where to purchase the .30 caliber 700 mm Barrel Kit...?
@ArturoGarcia-kx8pq9 ай бұрын
From the Philippines. How to avail your new ERD Bullet Central FX Magazines
@MrBad4fun Жыл бұрын
Could someone please show me the left hand magazine installed on a M3
@varmintknockers Жыл бұрын
Lots of good information at 22:33
@Rollin-With-Kirk Жыл бұрын
So I just have to chime in a little. By no means throwing any disrespect at all because Everything Ernest Rowe has made I've bought, everything He's talked about I've somewhat followed and somewhat Abided by. But Please, Please tell Me Other than Precision machining, different retention spring, a bearing, less pellet wobble/shake, ability for a little taller slug, what or how does a $128 magazine make an FX impact more accurate than a $45 magazine? I ask this because I remember when the Eaglevison came out and It was the Shyt, best magazine there is, precision made by cnc machining, high tolerance, better longevity for $150. I bought one! My gun didn't shoot any better with the $150 magazine than it does with the $45 magazine and I've shot over 3000 slugs through My $45 magazine/s and never had a failure and they're still not worn out! You also mention below much better for hunting, more precise kill? So how much more accuracy will this magazine add to My already average 1" sub-moa at 100yrds? Just an honest question! Hope this doesn't come off as rude, disrespectful or with having some kind of attitude!
@ernestrowe5061
Жыл бұрын
I Respect your opinion with past experience with EV mag. I don’t think i can convince U in anyway about the BC P-Mag, u just have to wait for actual user reviews.
@MasonStormSunny
Жыл бұрын
@@ernestrowe5061 there is no way that magazine can make the gun more accurate if your old mag is in axis good enough so that it does not damage the slug during chambering. The slug alignment in the bore is done by a probe, not the mag itself.
@Rollin-With-Kirk
Жыл бұрын
@@ernestrowe5061 Thank you @Ernest.. I do have Huge respect for what you do, your opinion on better enhancements, Your Excellence in Engineering and tune/tuning help! Firm Handshakes!
@Tunnelrat6666
Жыл бұрын
I only have the FX mag that came with the gun and it is shit. I just what a mag that works the way it should.
@coryb6722
Жыл бұрын
@@MasonStormSunny if the mag has the slug at an angle the probe will just mash it into the chamber at that angle creating flat spots on the slug
@artekdiablo Жыл бұрын
Hi Ernest where can I buy them??????
@allenhaymond59345 ай бұрын
Where you buy it
@andrewholt707510 ай бұрын
Does any one know where to get these in Canada?
@Yi-ren-jun-tuan Жыл бұрын
这款图纸卖吗?我想买图纸
@redgum1340 Жыл бұрын
The clear cover might be Polycarbonate, I suppose.
@masneobarbar5735 ай бұрын
Hello dear, I have been watching for a long time the new products from the series FX impact Mk2 M3 please tell me to fit long bullets Slugs 40 grein thank you 🙏 in advance
@masneobarbar5735 ай бұрын
Where can I order such a snare address?
@user-it4pn5fn5k Жыл бұрын
How to buy
@ctom4103 Жыл бұрын
Will there be one in.177 left hand?
@ernestrowe5061
Жыл бұрын
Hi, its on there website
@ctom4103
Жыл бұрын
@@ernestrowe5061 Thanks Ernest, your videos have all been very helpful and very interesting 👍
@bcml8 Жыл бұрын
Hopefully they will be available ALL black ??? The gold just doesn't look good !!!
@ernestrowe5061
Жыл бұрын
We tried black, but it was hard to tell Dark gray against black carousel and case
@dougiefresh3767
Жыл бұрын
Gold will look good with my bronze m3. Sorry brotha.
@ernestrowe5061
Жыл бұрын
@@Maloneranger0311 , much better for hunting, more precise kill
@dougiefresh3767
Жыл бұрын
@Maloneranger0311 I've harvested plenty. Don't know where you hunt in an open field. Secondly, nobody is making anyone buy them. Lmao!
@Maloneranger0311
Жыл бұрын
You are right Ernest, since the gold is to the rear it won’t matter👍
@franklinknisley1953 Жыл бұрын
Lexan?
@ernestrowe5061
Жыл бұрын
Yes!
@marktemple9315 Жыл бұрын
Ernest can I get one shipped to uk?
@ernestrowe5061
Жыл бұрын
Hi, please as BC if they ship to UK
@ctom4103
Жыл бұрын
Hi Mark. I could do with mine shipping to the UK. Have you made any progress? The one I want is out of stock anyway but just curious. It could be a problem with it being gun parts perhaps.
@marktemple9315
Жыл бұрын
Hi Charles I haven’t managed to get hold of supplier yet to find out but will let you know if I have any news 👍
@ernestrowe5061
Жыл бұрын
@@marktemple9315 - bulletCentral is willing to Ship to UK,
@rychardsertao7193 Жыл бұрын
👀👏👏👏👏
@coryb6722 Жыл бұрын
why hasnt FX fixed their own magazine? they sell a 2k rifle then pair it with a flimsy shitty magazine.
@ernestrowe5061
Жыл бұрын
The most current mag are updated
@MasonStormSunny Жыл бұрын
Poor design as it is impossible to insert the magazine without chambering the slug.
Пікірлер: 50
Outstanding! On waiting list for one right hand .35 cal. Glad I’ve put off waiting to order a second one
wow 🤯 I really hope that you guys have made 10s of 1000s of these because I reckon these will be extremely popular 👌 👏👏👏 very nicely done indeed!!
I like. I’m so happy someone finally made a left handed make. After all these years 👍👍👍
another success was dreaming happy for you like guaranteed always here in Brazil 🇧🇷
Hello Trouble with the kit tensioner. to fix the carbon tube of the kit you have to screw the bolt at the end of the barrel on the screw that holds the liner. But these screws that hold the liner and the carbon tube are tight, the slugs go all over the place, there is no more precision. Ernest Rowe shows us how to tighten the tensioner kit but tightening the kit tightens the liner screw and we lose precision. It would take a stop for the screw that holds the liner. Do you have a solution ?
It would be nice to have a magazine that could hold more than ten 40g slugs without the spring failing. Do they have some extra space for longer slugs?
@ernest in .22 what is the most bigger slug that can operate..? 40 grain.? Or just 34 grain.?
Ernest, I thought in your opening, you mention Bullit Central making left handed magazine..?? Where and when will the left handed magazine be available..?
Hey Ernst. Like the video on that new Bullit Central left and right-handed magazine. When will u do a video of the installation of the plate to make the left-handed magazine work on the m3? Really get a lot out of your videos.
Can not find a .30 caliber 700 mm barrel kit for my FX Dreamline... Does anyone know where to purchase the .30 caliber 700 mm Barrel Kit...?
From the Philippines. How to avail your new ERD Bullet Central FX Magazines
Could someone please show me the left hand magazine installed on a M3
Lots of good information at 22:33
So I just have to chime in a little. By no means throwing any disrespect at all because Everything Ernest Rowe has made I've bought, everything He's talked about I've somewhat followed and somewhat Abided by. But Please, Please tell Me Other than Precision machining, different retention spring, a bearing, less pellet wobble/shake, ability for a little taller slug, what or how does a $128 magazine make an FX impact more accurate than a $45 magazine? I ask this because I remember when the Eaglevison came out and It was the Shyt, best magazine there is, precision made by cnc machining, high tolerance, better longevity for $150. I bought one! My gun didn't shoot any better with the $150 magazine than it does with the $45 magazine and I've shot over 3000 slugs through My $45 magazine/s and never had a failure and they're still not worn out! You also mention below much better for hunting, more precise kill? So how much more accuracy will this magazine add to My already average 1" sub-moa at 100yrds? Just an honest question! Hope this doesn't come off as rude, disrespectful or with having some kind of attitude!
@ernestrowe5061
Жыл бұрын
I Respect your opinion with past experience with EV mag. I don’t think i can convince U in anyway about the BC P-Mag, u just have to wait for actual user reviews.
@MasonStormSunny
Жыл бұрын
@@ernestrowe5061 there is no way that magazine can make the gun more accurate if your old mag is in axis good enough so that it does not damage the slug during chambering. The slug alignment in the bore is done by a probe, not the mag itself.
@Rollin-With-Kirk
Жыл бұрын
@@ernestrowe5061 Thank you @Ernest.. I do have Huge respect for what you do, your opinion on better enhancements, Your Excellence in Engineering and tune/tuning help! Firm Handshakes!
@Tunnelrat6666
Жыл бұрын
I only have the FX mag that came with the gun and it is shit. I just what a mag that works the way it should.
@coryb6722
Жыл бұрын
@@MasonStormSunny if the mag has the slug at an angle the probe will just mash it into the chamber at that angle creating flat spots on the slug
Hi Ernest where can I buy them??????
Where you buy it
Does any one know where to get these in Canada?
这款图纸卖吗?我想买图纸
The clear cover might be Polycarbonate, I suppose.
Hello dear, I have been watching for a long time the new products from the series FX impact Mk2 M3 please tell me to fit long bullets Slugs 40 grein thank you 🙏 in advance
Where can I order such a snare address?
How to buy
Will there be one in.177 left hand?
@ernestrowe5061
Жыл бұрын
Hi, its on there website
@ctom4103
Жыл бұрын
@@ernestrowe5061 Thanks Ernest, your videos have all been very helpful and very interesting 👍
Hopefully they will be available ALL black ??? The gold just doesn't look good !!!
@ernestrowe5061
Жыл бұрын
We tried black, but it was hard to tell Dark gray against black carousel and case
@dougiefresh3767
Жыл бұрын
Gold will look good with my bronze m3. Sorry brotha.
@ernestrowe5061
Жыл бұрын
@@Maloneranger0311 , much better for hunting, more precise kill
@dougiefresh3767
Жыл бұрын
@Maloneranger0311 I've harvested plenty. Don't know where you hunt in an open field. Secondly, nobody is making anyone buy them. Lmao!
@Maloneranger0311
Жыл бұрын
You are right Ernest, since the gold is to the rear it won’t matter👍
Lexan?
@ernestrowe5061
Жыл бұрын
Yes!
Ernest can I get one shipped to uk?
@ernestrowe5061
Жыл бұрын
Hi, please as BC if they ship to UK
@ctom4103
Жыл бұрын
Hi Mark. I could do with mine shipping to the UK. Have you made any progress? The one I want is out of stock anyway but just curious. It could be a problem with it being gun parts perhaps.
@marktemple9315
Жыл бұрын
Hi Charles I haven’t managed to get hold of supplier yet to find out but will let you know if I have any news 👍
@ernestrowe5061
Жыл бұрын
@@marktemple9315 - bulletCentral is willing to Ship to UK,
👀👏👏👏👏
why hasnt FX fixed their own magazine? they sell a 2k rifle then pair it with a flimsy shitty magazine.
@ernestrowe5061
Жыл бұрын
The most current mag are updated
Poor design as it is impossible to insert the magazine without chambering the slug.
bonjour seront il fabrique en 7.62 pour panthera