FX Impact M3 micro quick tune system disassembly and reinstallation
Жүктеу.....
Пікірлер: 20
@tobionemiyagi59338 ай бұрын
Big thanks Ernest, just got myself a M3 and I’m about to start assembling all my rifle and extra tuning parts. Keep up the fantastic work. Best regards from Sweden.
@carlmatera332 Жыл бұрын
Another super how-to video. Thanks Ernest.
@chrisfigueroa3361 Жыл бұрын
Thanks Ernest for the info helps out alot 👍 have a good one
@fieldpro5041 Жыл бұрын
thanks buddy for all the educational videos
@redscorpionairgunner5254 ай бұрын
thank you for your instruction
@la-roibafxairgunsofyan553010 ай бұрын
Good job
@mehdialom2385 Жыл бұрын
Thnq for informative from India
@fredriksteen4504 Жыл бұрын
Perfect thanks for this video
@airgunspestingch.8426 Жыл бұрын
👋🏾sup brAh! Good video my braddah🇵🇭👊🏾😎
@scottstyles7674Ай бұрын
G'day Ernest, First shots last night at the range and the horizontal Micro tuner just spins freely with no ajustment happening. Is it safe to just tighten the grub screw or is there a slot it should bed into on the shaft ? Will that upset warranty ?
@Jeeper137810 ай бұрын
I have the new Panthera compact. Prob not a issue.. just wondering. The large macro dial has 1-23 with iirc the even numbers being dots. So 1 dot 3, dot, 5 etc etc. my detents are not exactly aligned with the arrow bug oddly it wont stop or setup on the 12 dot.. jumps over it. The rest are fine. Not a big deal im sure just figure i ask. Ty
@iantcroft7 ай бұрын
Hi Ernest, what hex keys do you use? I dont think normal keys will cut it!
@octavianluncan5091 Жыл бұрын
Hello Ernest and sorry for my english...Can you tell me please,I heard strange noise like air leak to the macro wheel,how can I fix that?I bought a "brand new" FX Impact M3 Sniper from Aeron(Czech Republic) but i found this problem when i tried to adjust the scope on it,this disturbing noise like bubling...I am sure this is an air leak !Thank you in advance,great video,like all youre videos if fact !🙏❤️
@rychardsertao7193 Жыл бұрын
👏👏🤝😀🇧🇷
@ronnygordy5862 Жыл бұрын
I added a tungsten hammer weight, but now Micro and Macro don't seem to work. They move like before but don't change any speed in the gun. I can go from 16 to 1 and not change speed??
@ernestrowe5061
Жыл бұрын
Hi, what’s your reg pressure & valve adjuster position?
@ronnygordy5862
Жыл бұрын
@@ernestrowe5061 1st reg 170 2nd reg 130 valve line 4...I can turn the valve clockwise and decrease fps as normal
@nigelbase1196 Жыл бұрын
Never known a make of rifle that has to be messed about with so much!
@ernestrowe5061
Жыл бұрын
Not all airguns are created equal some has extreme adjustability, that said one gun up to 200fpe .177 to .357 to tune all caliber and power need extreme adjustability and double the fun-> thats how i see it-> I’m sure I’m not alone.
@DK-TechCorner
Жыл бұрын
@@ernestrowe5061 100% agree its great fun and you can really fine tweak it, go for Maverick or Wilcat BT if you are looking for a more simple gun to adjust and they also have a lot of power, very close to the Impact, they are also easier to get back to the same tune because they are made more simple and thereby not as many joints where the tolerance can fluctuate when you disassemble / assemble your gun 🙂👍
Пікірлер: 20
Big thanks Ernest, just got myself a M3 and I’m about to start assembling all my rifle and extra tuning parts. Keep up the fantastic work. Best regards from Sweden.
Another super how-to video. Thanks Ernest.
Thanks Ernest for the info helps out alot 👍 have a good one
thanks buddy for all the educational videos
thank you for your instruction
Good job
Thnq for informative from India
Perfect thanks for this video
👋🏾sup brAh! Good video my braddah🇵🇭👊🏾😎
G'day Ernest, First shots last night at the range and the horizontal Micro tuner just spins freely with no ajustment happening. Is it safe to just tighten the grub screw or is there a slot it should bed into on the shaft ? Will that upset warranty ?
I have the new Panthera compact. Prob not a issue.. just wondering. The large macro dial has 1-23 with iirc the even numbers being dots. So 1 dot 3, dot, 5 etc etc. my detents are not exactly aligned with the arrow bug oddly it wont stop or setup on the 12 dot.. jumps over it. The rest are fine. Not a big deal im sure just figure i ask. Ty
Hi Ernest, what hex keys do you use? I dont think normal keys will cut it!
Hello Ernest and sorry for my english...Can you tell me please,I heard strange noise like air leak to the macro wheel,how can I fix that?I bought a "brand new" FX Impact M3 Sniper from Aeron(Czech Republic) but i found this problem when i tried to adjust the scope on it,this disturbing noise like bubling...I am sure this is an air leak !Thank you in advance,great video,like all youre videos if fact !🙏❤️
👏👏🤝😀🇧🇷
I added a tungsten hammer weight, but now Micro and Macro don't seem to work. They move like before but don't change any speed in the gun. I can go from 16 to 1 and not change speed??
@ernestrowe5061
Жыл бұрын
Hi, what’s your reg pressure & valve adjuster position?
@ronnygordy5862
Жыл бұрын
@@ernestrowe5061 1st reg 170 2nd reg 130 valve line 4...I can turn the valve clockwise and decrease fps as normal
Never known a make of rifle that has to be messed about with so much!
@ernestrowe5061
Жыл бұрын
Not all airguns are created equal some has extreme adjustability, that said one gun up to 200fpe .177 to .357 to tune all caliber and power need extreme adjustability and double the fun-> thats how i see it-> I’m sure I’m not alone.
@DK-TechCorner
Жыл бұрын
@@ernestrowe5061 100% agree its great fun and you can really fine tweak it, go for Maverick or Wilcat BT if you are looking for a more simple gun to adjust and they also have a lot of power, very close to the Impact, they are also easier to get back to the same tune because they are made more simple and thereby not as many joints where the tolerance can fluctuate when you disassemble / assemble your gun 🙂👍