Just must say that your channel is amazing thanks for your time and keep up the good work

These tutorials are peerless. I'm not an FX kinda guy, but you could tear down a toilet flush assembly and I would learn something new about airguns. I'm here for the Leshiy 2 content tbh but your knowledge and love of PCP technology is inspirational.

@sub12airgunners

3 жыл бұрын

I really appreciate that, its really good to hear that people are enjoying the Vids, more Leshiy 2 stuff is on the way, I am just waiting to get some more range time so I can have a bit of a play and tune with the valve, but more vids will follow shortly. Thanks for watching.

As always, very well explained and clear. thanks.!. Looking forward to the re-assembly. 👍👍👍

@sub12airgunners

3 жыл бұрын

Thanks again! next vid coming soon.

Wow you know your rifles I'm impressed so easy to understand and I like the way you tell us the hex key measurements thankyou very much for your intuitive turtorial.

@jamiepinkston7804

3 жыл бұрын

This guy is like the UK version of Ernest Rowe!

@sub12airgunners

3 жыл бұрын

Thanks glad you found it useful, I appreciate the feedback. Thanks for watching.

@sub12airgunners

3 жыл бұрын

high praise indeed thanks for watching.

15:05 ...thank you very much for hinting where that noise comes from when uncocked. First one who mentioned that in a video! Really appreciate!

@sub12airgunners

Жыл бұрын

You're welcome thanks for watching

Excelente vídeo! Best regards from Portugal!

@sub12airgunners

3 жыл бұрын

Thanks for watching, good to hear the vids are traveling the world.

Nicely done ~ Thanks 🥇👍

@sub12airgunners

3 жыл бұрын

Thank you too! Thanks for watching.

Hi, thanks for your excellent videos. I just wanted to ask. On the M3 where the angled manometer bracket fits there are three screws. The central one being the air supply. Do you know how this is sealed as standard (without the bracket). I've looked at FX's diagrams and it doesn't show any seal, just a dog head grub screw. Many thanks

Great video. Thank you.

Quality from start to finish 👏 I watched every second and I enjoyed every second very good job 👍 I won't be chopping in my mk2 anytime soon but that said if I didn't have an impact already and wanted one I would definitely get a new m3 over the possible cheaper surplus mk2s As regards to the backwards compatability I've decided if anything for the parts that would make the difference to me (1st regulator and quick tune) its more a case of forward compatability at this point 😁 I am basically thinking if anything it would be better to look out for a m3 block and transfer my mk2 parts onto that 😊 obviously this is the opposite way of looking at it and the blocks aren't available separately directly from fx and why would they but these things have away of coming around, this would be way easier then getting my mk2 block re-engineered to accept the m3 valve minus the other benefits. This is light years away but think I definitely won't be the only one thinking this 😆 Anyways looking forward to the reassembly with the many personal improvements brass reg piston and all 😀👍? atb

@sub12airgunners

3 жыл бұрын

Thanks glad you enjoyed it, i did put all the parts from the M3 on a MK2 body and they fit nicely, not sure if they are going to be available any time soon though. Good luck on finding a M3 main block I think they will be like hens teeth at the moment, lot of improvements coming, no brass reg piston yet though I didn't get a chance to make one, but ill just make on off camera, lots of spring guides and polishing done though. Thanks for watching.

Nice and well done. 👏

@sub12airgunners

3 жыл бұрын

Many thanks. Thanks for watching.

Are there drawings and part lists available for those restricted 12 variant? I just can find some for the unrestricted. my local dealer does not have them but before ordering this expensive rifle, i would like to know how its build. your videos are of great help understanding the mechanics and details, thanks a lot

Brilliant videos for the UK market especially, wondering do you work on guns for a price as would like for my M3 to have all those legal mods done?

Hello i have stripped 2 threads holes on the top plate that holds the scope rail it is M3x10 and M30x8 what is the best method to fix this please thank you

Nice video, subscribed ;)

@sub12airgunners

3 жыл бұрын

Awesome, thank you!

Great vid, roll on delivery 😎

@sub12airgunners

3 жыл бұрын

Thanks, they should be coming in soon.

I missed my locking Rod distance! What is the correct measurement of locking rod? (M3 impact)

Thanks for this. Only issue I had was that the valve blank cover was not hand tight. In fact it couldnt be shifted with pliers. I wasnt going to try molegrips so had to leave that in place to save damaging it.Also couldnt undo the grub screw holding the valve in the Power Block. It was way too tight and again would have damaged it.

He knows what he,s doing brillant👍

@sub12airgunners

14 күн бұрын

thank you for watching 😀

Your videos are among my new favorites, thanks so much for the stellar work! some questions though: That regulator in front for the bottle looks a lot like the one found in the Leshiy 2- Is it, by any chance, the same generic device and if so could it be a way to give a Mark 1 (Impact X) second reg. ability? And.... how do I find your stuff on ebay? Thanks again !!

@sub12airgunners

3 жыл бұрын

HI, thanks you very much for your kind word glad you enjoy the vids, unfortunately the front reg is a unique fitting to the M3, it will not fit the older Impacts without machining of the Impact block, You can find my stuff on ebay link below. www.ebay.co.uk/sch/geoffeve-7/m.html?item=373570787127&hash=item56fa8dd737%3Ag%3AmscAAOSwnRZgjCK1&rt=nc&_trksid=p2047675.l2562

youre clearly not sponsored by fx good honest review

@sub12airgunners

3 жыл бұрын

Thanks, yep no sponsorship, sponsored vids just feel like long ads to me and its not what you want to hear when looking at a new rifle. Thanks for watching.

Great video to disassemble the Fx Impact M3! can you kindly tell me at min 19.35 what kind of cover for the pressure gauge you use? Thank you

@sub12airgunners

3 жыл бұрын

Its just one I made to cover the chrome gauge, the white dots just a reference mark to show where the regs set. Thanks for watching.

@fabriziopapetti8455

3 жыл бұрын

@@sub12airgunners Thank you too

Hey, hope you get to reply to this comment. I really want to buy a rifle I can take to Belgium with me and once there easily unrestrict it. Then when returning back to the UK take it back down to a sub 12. With the impact mk3 if I remove the trigger and open up the regulator will I then have access to the rifles full power, or is there more I'd need to do / parts to replace? I have a chronometer so returning back to sub 12 wouldn't be an issue, even if it is a little fiddly finding the sweet spot. If this isn't as simple as it seems with the mk3 is there any rifle you could recommend better suited to this purpose? Something that could easily be returned to sub 12 before entering back into the UK.

@mikelg5456.

Ай бұрын

Have you finally found that information?

Do you know the difference of the M3 barrel than the most updated MK2 barrel? Is there anything different as far as threads in the internal shroud and compatibility? Great video, thx!

@sub12airgunners

3 жыл бұрын

Sorry, meant to say in the vid, its the same barrel system as the MK2, but it now comes as standard with the superior liner, the shroud end is a little different but no change in compatibility. Thanks for watching.

@83bluecheese

3 жыл бұрын

@@sub12airgunners hi mate quick question if you dont mind. i have the mk2 impact and the barrel in it is fully rifle'd end to end. is that the superior barrel that i have or is the superior barrel different ? cheers and great informative video aswel

on the front cover where the blanking valve, (12.15 time on vid) if this is undone a little bit/a turn or 2, should the power increase, or should it stay the same at under 12lbft?

@sub12airgunners

10 ай бұрын

Hi no that is just a cover on the sub 12 guns so shouldn't do anything

@Bad-Alias

10 ай бұрын

@sub12airgunners thank you for the reply. Thats good to know

I would like to know the diameter and the thread of the new adapter with regulator 1, I don't know but I think it should measure 15mm

@sub12airgunners

3 жыл бұрын

Not sure I haven't taken mine off yet, when I do ill make a update.

Hello sir, as several people here i was glad to see at 15.04 what de rateling noise was in my fx but i can see my hammerspring ( the spring i can see behind the quick tune) is moving too when the rifle is uncocked . I can move it with a toothpick 4a5 mm when the powerweel is on 1 . Is this also normal or should this be always under tension ? I've the unrestrickted version (Belgium) . Any help would be much appreciated! Thank you !

@sub12airgunners

6 ай бұрын

that's normal also the hammer spring is loose when the rifle is un cocked 😀

@guydnls387

6 ай бұрын

@@sub12airgunners Thank you for youre reply . I thought something was wrong with my gun. You made my day for sure 🙂. Keep up youre great channel !!

nice one 👏

@sub12airgunners

3 жыл бұрын

Thanks 🔥

Hi do you know if the mk3 bottle reg can be fitted to an mk1? Is it the same block thread? Kind regards

@sub12airgunners

2 жыл бұрын

No its a different thread, they wont fit. Thanks for watching.

hey, im sure your pellet probe will not be allign with the TP , coz i can notice it fr the top plate... u should check it

@sub12airgunners

3 жыл бұрын

Just checked it and its perfect, I think the pellet probe housing is a little different on the M3 so it looks like its slightly misaligned but my one is where it should be the PP lines up with the transfer port with no misalignment. Thanks for watching.

Hey bud. I just got myself and M3 after upgrading from the MK2. Is there anyway I can contact you directly as I have a question about my M3. Any help would be very much appreciated! Thanks.

@sub12airgunners

3 жыл бұрын

You can send me a message on the airgun forum (Jeffski). Thanks for watching.

Hi do you sell the hammer guides?.

How can I get hold of all the tricked out mods you make for my fx the guides etc do you make to order please

@sub12airgunners

Жыл бұрын

sorry we don't sell the parts 😀

Are you planning on doing a strip down video for the FX DRS?

@sub12airgunners

9 күн бұрын

yes very soon we will be doing the strip down

Can I remove my scope rail and trigger guard without a full desemble

@sub12airgunners

2 жыл бұрын

Yeah no problem, just unscrew the bolts holding those two pieces on and take them off. Thanks for watching.

is it possible to buy the tool for C1? I don´t like Rowes tool

@sub12airgunners

2 жыл бұрын

You can get them from Bagnall and Kirkwood, link below. Thanks for watching: spares.bagnallandkirkwood.co.uk/product/fx-impact-mk2-m3-c1-19604-hammer-seat-removal-tool/

What make are the Allen screwdrivers you are using here please ?

@sub12airgunners

Жыл бұрын

They are EDS i have been using them for years and they are great

Great video👍👍👍can you do same with the maverick please

@jonnyjoanknecht5164

3 жыл бұрын

Yes!!

@sub12airgunners

3 жыл бұрын

Yep a maverick tear down and tune up is on the cards, hopefully soon. Thanks for watching.

@mikelg5456.

Ай бұрын

@sub12airgunners do you have same video for maverick? I can not find it

is the Mk3 a better buy the a Mk2 Impact?

@sub12airgunners

3 жыл бұрын

In sub 12 there is not much difference between the two, I would say the M3 is the better rifle just side by side but if you got a real good deal on a MK2 I would say take it. For FAC the M3 is the definite better choice though. Thanks for watching.

I wondered what that noise was when I moved gun side to side its the hammer ? Well a week on the sick I've watched every one and spent £220 at bagnall and kirkwood 👍

@sub12airgunners

Жыл бұрын

LOL hope you feel better now👍 thanks for watching

@darrenrichardson6803

Жыл бұрын

@@sub12airgunners I appreciate the knowledge your sharing with people and couldn't be explained any better, to use tools like you have is a skillful thing and watching machines like that work is something I've never seen. Awesome I'm subscribed keep up the cracking work 👍

the sub 12 has no barrel tuner i wanted to see how that was made im so sorry your laws suck here if it shot a 50lb bullet at 3000fps using air it would still be simply a air rifle i still dont see how your gov figures its a firearm when its above 12ftlbs theres no fire involved and that is what makes it a fire arm lol love your videos keep up the good work sir

@sub12airgunners

3 жыл бұрын

Thanks, yeah the government opts for a "no fun allowed" policy with everything unfortunately. I don't think the FAC or international version come standard with the barrel tuning attachment, its an optional add on part I believe. The shops are starting to get them in stock now though so we should see how they work shortly. Thanks for watching.

👍

Thumbs up .

@sub12airgunners

3 жыл бұрын

Thanks for watching, I appreciate it.

can u buy me bow ill pay u extra its hard to find one

Waste of money in sub 12 the M3 . The features that it has are all set up for power .

@sub12airgunners

3 жыл бұрын

Yeah but the dual regs and the ambidextrous cocking are nice features, but the impact has always been power house, but there is no great improvements over the MK2. Thanks for watching.