Barrel cleaning and workout all in one, thanks Ernest. Great as usual
@roberthramirez64292 жыл бұрын
Thank you very much for your collaboration, Mr. Ernest.
@bretlawson9242 жыл бұрын
Great presentation and idea. Thanks Ernest
@qingyuhu2 жыл бұрын
Cool idea! I use to fish a LOT and we use to find braids cut into older stainless steel guides which it does fairly quickly under pressure depending on the braid. Obviously you aren't putting a lot of pressure on it but just something to keep in mind.
@DrSaminstine2 жыл бұрын
Great tec tip! Thanks for sharing!
@donaldlundy3452 жыл бұрын
Great video Ernest
@derrickmitchell39dm2 жыл бұрын
Man, that Patch Worm works well too.
@masneobarbar5734 ай бұрын
After such a cleaning, there will be a shiny inside
@nathanielhenrydumaguin55692 жыл бұрын
Ernest, the living legend...
@HDHD-yv9np
Жыл бұрын
well said
@fxpestoperator55272 жыл бұрын
Very Smart idea!!!!!!
@gunzzz78264 ай бұрын
And then look at crowns of liner :D
@arthurortega5946 Жыл бұрын
Is Bore polishing worth the work and how much of an improvement do our get
@delovahunterpadang68112 жыл бұрын
Nice video brother🇮🇩🇮🇩🇮🇩🇮🇩
@peteralexben2 жыл бұрын
i would added and use a crown saver at the muzzle
@roberthramirez64292 жыл бұрын
No, how many rifling striae
@johncherry76932 жыл бұрын
Can u tell me what kind of cordless screwdriver you use please thanks in advance
@ernestrowe5061
2 жыл бұрын
Panasonic EY7410LA2S 3.6-Volt
@3pasos2 жыл бұрын
★★★★★Excellent Ernest ,Have a Great Weekend,best Regards ●●Pj●●☝️🇨🇱🍻🍻
@christhomas4260 Жыл бұрын
What is the advantage over using a cleaning rod
@Killkenny62
Жыл бұрын
was my question exactly......
@roberthramirez64292 жыл бұрын
Ernest, Good technique, could you help me with something? barrel rifling numbers
@ernestrowe5061
2 жыл бұрын
About twist rate??
@roberthramirez6429
2 жыл бұрын
@@ernestrowe5061 No, how many rifling striae
@roberthramirez64292 жыл бұрын
No, how many grooves does the barrel have?
@ernestrowe5061
2 жыл бұрын
Hi, do have an Impact/FX liners- look in the bore and count
@franciscocarvalho24242 жыл бұрын
😃😃👍👍
@mikefoor51622 жыл бұрын
After cleaning do you find it takes a few shots to settle back to consistency?
@ernestrowe5061
2 жыл бұрын
Yes, need that lead dust to fill in the Pours / lands
@mikefoor5162
2 жыл бұрын
@@ernestrowe5061 Thanks. I've noticed after I clean it takes a few shots to settle down and wanted to be sure that was typical.
@MasonStormSunny
2 жыл бұрын
@@mikefoor5162 I need just one shot to be back on track. Sometimes it's not even needed.
@scubajeeper1
2 жыл бұрын
I don’t think my arms are long enough to do a 700🤔
@MasonStormSunny
2 жыл бұрын
@@scubajeeper1 wait for 800mm ones
@sniperndeso56482 жыл бұрын
Yes 👍👍👍👍👍👉☕
@johnrambo1349 Жыл бұрын
I thought Ted and Matt said fx liner do not need cleaning. Wtf
@surreallife7774 ай бұрын
Hi Ernest, I really don’t understand why you have to do this if you’re purchasing an expensive Airgun or barrel. Why doesn’t the factory do this for you before you receive it? It’s strange.
@airguns-shooter Жыл бұрын
I use carbon fiber rod with nylon brush easier and faster
Пікірлер: 45
Barrel cleaning and workout all in one, thanks Ernest. Great as usual
Thank you very much for your collaboration, Mr. Ernest.
Great presentation and idea. Thanks Ernest
Cool idea! I use to fish a LOT and we use to find braids cut into older stainless steel guides which it does fairly quickly under pressure depending on the braid. Obviously you aren't putting a lot of pressure on it but just something to keep in mind.
Great tec tip! Thanks for sharing!
Great video Ernest
Man, that Patch Worm works well too.
After such a cleaning, there will be a shiny inside
Ernest, the living legend...
@HDHD-yv9np
Жыл бұрын
well said
Very Smart idea!!!!!!
And then look at crowns of liner :D
Is Bore polishing worth the work and how much of an improvement do our get
Nice video brother🇮🇩🇮🇩🇮🇩🇮🇩
i would added and use a crown saver at the muzzle
No, how many rifling striae
Can u tell me what kind of cordless screwdriver you use please thanks in advance
@ernestrowe5061
2 жыл бұрын
Panasonic EY7410LA2S 3.6-Volt
★★★★★Excellent Ernest ,Have a Great Weekend,best Regards ●●Pj●●☝️🇨🇱🍻🍻
What is the advantage over using a cleaning rod
@Killkenny62
Жыл бұрын
was my question exactly......
Ernest, Good technique, could you help me with something? barrel rifling numbers
@ernestrowe5061
2 жыл бұрын
About twist rate??
@roberthramirez6429
2 жыл бұрын
@@ernestrowe5061 No, how many rifling striae
No, how many grooves does the barrel have?
@ernestrowe5061
2 жыл бұрын
Hi, do have an Impact/FX liners- look in the bore and count
😃😃👍👍
After cleaning do you find it takes a few shots to settle back to consistency?
@ernestrowe5061
2 жыл бұрын
Yes, need that lead dust to fill in the Pours / lands
@mikefoor5162
2 жыл бұрын
@@ernestrowe5061 Thanks. I've noticed after I clean it takes a few shots to settle down and wanted to be sure that was typical.
@MasonStormSunny
2 жыл бұрын
@@mikefoor5162 I need just one shot to be back on track. Sometimes it's not even needed.
@scubajeeper1
2 жыл бұрын
I don’t think my arms are long enough to do a 700🤔
@MasonStormSunny
2 жыл бұрын
@@scubajeeper1 wait for 800mm ones
Yes 👍👍👍👍👍👉☕
I thought Ted and Matt said fx liner do not need cleaning. Wtf
Hi Ernest, I really don’t understand why you have to do this if you’re purchasing an expensive Airgun or barrel. Why doesn’t the factory do this for you before you receive it? It’s strange.
I use carbon fiber rod with nylon brush easier and faster