⭐ More Videos That Can Help: Top 5 Furnace Problems and How to Fix Them: kzread.info/dash/bejne/hmh9udaEqZCThs4.html Furnace Parts and Functions Explained: kzread.info/dash/bejne/mYJht6urZpuYZNo.html Thermostat Not Turning on Heat: kzread.info/dash/bejne/YmloxbSsm8jOZc4.html Blank Thermostat Screen: kzread.info/dash/bejne/qJ1nsayud8nHkcY.html Furnace Error Codes Explained: kzread.info/dash/bejne/fGyOx8mmZLepnLA.html Furnace Sequence of Operation (important to know): kzread.info/dash/bejne/c4V4wa-elKzRnKw.html

@kittylove67

7 ай бұрын

i have a problem when blower kicks in burner kicks off????

It is 2am. I noticed my house was getting cold the furnace wasn’t going. I am a single mom really struggling. My son is autistic it’s hard to get people in my house with him. I started to panic it’s freezing snowing. Your video I followed the best I could. My heat Is back on. Thank you so much for making this video you are a savior for me right now.

@duMaurier15

Жыл бұрын

You know you could have just said thanks for the video, it worked... Instead of the sob story.

@GadgetGirl.74

Жыл бұрын

@@duMaurier15 how rude. As a single mom, sometimes we feel it is important to give a back story to show our level of appreciation. Be nice... it isn't too hard.

@duMaurier15

Жыл бұрын

@@GadgetGirl.74 Sorry. Accept my apologies.

@janellerollins5893

Жыл бұрын

@@GadgetGirl.74 You were waaay nicer than most towards this "comment."

@squarehammer4619

Жыл бұрын

@@duMaurier15 Jesus, did you get up on the wrong side of the bed today? She's a single mom with an autistic son and you want to come on here and run your mouth? Have a better day buddy

This guy provides concise and informative videos. Probably the best on the Internet.

It was the first day of cool temps and my house was 63°F. I turned on the heater and sure enough it was blowing, but only cold air. I watched your video. I opened my furnace panel, I looked at the flashing lights, I correlated it to the diagnostic on the sticker of the inside of the furnace. I replaced the filter, I didn’t have to bang on the thingy, but I pulled the plugs out, and when I put them back in my heater started working! I am so proud of myself, and I only tried it because of how clear and easy your video was. Thank you! Single female, 10pm and I’m so happy.

Woke up to a very cold house this morning, went down to have a look at my thermostat, sure enough worse nightmare specifically with the COVID-19 situation.. called a furnace repair company.. $245 for a technician to come out on the weekend... given the fact I been out of work for 2 + weeks now.. I would of probably just waited out until tomorrow if I didn't have my girls 7&3 years old home with their mom.. Started watching KZread videos after watching maybe 3-4 came across yours . tried everything step by step in this video for 2 times.. 3rd time the MAGIC HAPPENED... Thanks to you I saved lot of $$$, and now our house is warm again.. great videos... keep up the life saving work.. you have a subscriber for life....

Hey Jay...You are my Furnace Fixer HERO!!!! After watching your video it took me exactly 2 minutes to fix my High Limit Switch that must have been out over 6 months. Of course, I heard the fan blowing and all the switches and button worked so I felt I was good to go...and of course I purchased room fans. Your step by step educational video save me of $225...from a so call professional quote...and now my home is HEATED, in no time. That Tapping trick on the High Limit Switch was amazing...and your other video, on cleaning your burners with a wired brush was fantastic...my burners look like new. By the way, I have never touched my Furnace...didn't even know a blinking Sight light was even suppose to be on. You make me proud to be a Female fixer upper in my home...Thankssssssssssssssssssss a whole lot!!!!! Keep up the good work!!!!

It's rare to find a good honest repair guy. always appreciate it. Thanks for your simple and free advice!.

I know this video is 3 years old. However, I followed the steps in this video and got my furnace working again. My upper limit was open, and I changed the air filter, but it still didn't work. Gave the sensor a few taps with the screw driver, and Voila it's working. Saved me at least $80 for a service call. Much appreciated 🙏 ☺️

After watching several furnace videos, This is the one that worked. Thank you!

Man that was the best way someone have ever explain something ... thanks a lot God bless u bro 🙏🏿☝🏿

This is our second time to have to refer to this video to fix our furnace. It’s been a couple cold seasons now since we fixed it the first time. It has been so helpful. Saved us a service call and cost of repair! Thank you so much for this wonderful tutorial!

Tapping it made it work! Noticed vents were blowing cold air, burners weren’t on, and flashing 4 lights. This video saved us a goods night rest, THANK YOU!

@WordofAdviceTV

5 ай бұрын

Great to hear that! You're welcome, stay warm!!

I would say this video is the most useful I get in years, considering how urgent it is having no heat in cold days. Clear symptom and instruction, thumb up!

Woke up on Christmas Day to a freezing house. I was so thankful for your video. You saved Christmas!!!

Thanks to your honesty I got my furnace running. Praise God! I cleaned up the fire sensor and changed the igniter; reset one of the thermal switches and took the other one out and tapped it on the floor. Now I know I have to keep the filter changed. :)

Excellent breakdown for diagnosing and testing limit switch issues! $10 part is much better than a service call. Thanks for the video.

You are a genius!!! I knocked on the limit switch a couple times and the inducer motor started up right away (Goodman and the limit switch was round, just like you described it). I had furniture in front of the intake vent, which was probably the culprit...just to let your viewers know. Thanks again!!!!

You are a Star ! Watching you is like watching this old house or one of those public broadcasting stations andyou communicate and show what you're doing so well anyone could follow it most likely and you're not boring

This was it! Hit it with a screwdriver and it worked. Life saver. It was cold! Thank you!

You're the best, Today on Christmas my furnace gave up, I followed the steps you suggested in your video. Changed the filter, tapped the high-limit switch and it worked, I will still get it serviced. Thank you you're a life saver. God bless.

You are amazing, clear, concise, and to the point. The envy of some companies (not all) who take advance of innocent non-knowledgeable home owners. Thank you for this and other informative videos, helped me immensely as I’m sure others. Thank you! Subscribed!

@WordofAdviceTV

3 жыл бұрын

You are welcome! Thank you for the positive review! 😄 I'm glad to hear that the videos have been helpful for you and appreciate you subscribing. Stay warm and have a Merry Christmas!!

Saved my life this morning! With all this COVID stuff going on, we were really worried that we were going to have a service man come in to fix it. Found your video and had it up and running within 2 minutes of watching it! Thank you!!! Mine is a Lennox furnace. The lights are green and red, alternating slow flashes (1 per second) to indicate a problem with this switch. Change your filter!

Awesome! No one else has this. I had the same problem. No heat. Clogged filter. Four red lights. Other videos really didn’t help at all. Your’s nailed it. Thank you!

Your video saved the day! I appreciate the way you took time to explain how you take your voltage readings and you were very thorough in your explanations. Thank you my friend!

Just fixed my furnace, because of you. Thanks a million! You are the greatest!

Jack, thank you once more. It works. It is below 10 degrees here and I have no protection plan right now. I was freaking out about my family being cold. Thank you for giving a very clear instructions. God Bless.

Wow we must protect this Man at all Costs, I owe u my career🙌🏽

You just saved my household a bunch of money, thank you!

I love KZread. And people like you that make easy to understand, concise videos. I watched another video or two that were okay but didn’t resolve the issue-yours did. Thanks for saving me the service call and a cold night as temps are supposed to drop the next couple nights here in MN. Signed, A Grateful Dad

My furnace if back up and running thanks to your help 🙂 🙏 thank you very much for sharing your experience! God bless you and your family.

Once again, KZread saves me time and money.

I love your videos and I had to thank you. I watched a few of them until I got to this one which ended up being the problem with mine. I had no knowledge of furnaces before this and you made learning about them comprehensible and fairly entertaining as well. Not to mention the audio and video quality is great. I really appreciate it.

THANK YOU! You saved me paying hundreds of dollars to incompetent HVAC companies. They diagnosed my Trans furnace problem as the air pressure switch, and were going to charge $380 for the part and another $100 to go get it on a Saturday. Was the wrong diagnosis, would have been the wrong part, and many hours wasted. Thank you! I've subscribed. :)

It's 2am. It's 11 degrees outside and my furnace died. You saved my pipes from freezing. I tried everything and this fixed it. You are an hvac Robin hood.

Nothing makes me happier when I give something a good whack and it turns on! Thank you for the awesome videos!

Thank you. Followed the instructions, and worked. Furnace back on. I tapped the furnace housing and the switch didn't reset. I removed it and tapped it and it reset. I would have diagnosed it and bought a new switch. Saved not only money, but the time to get the switch. Don't know why someone would give it a thumbs down. Two thumbs up!

Thank you was able to install a 90 plus furnace in my home in the middle of last winter because of instructional videos such as yours. God Bless you.

Thank you for taking the time to make this video. Your banging on the switch did the trick for me! Same issue... Neglected filter.

Thank you sir!! Fan was constantly running throughout the night, was up waiting for it to shut off. House temp dropped to 62. Outside was 23. Found this video. Filter was embarrassingly dirty. Followed your steps of banging on switch, turned power back on and eagerly waited for start-up. Like magic I now have heat. Thank you so much.

Thanks AGAIN!! I fixed my sister’s heating issue. Lots of LIKES! Nate from Long Beach California.

I have (2) Bryant Plus 90i Furnaces. My problem was with one, it was blowing out cool air for a while, then cuts off and stays off for a long period of time then turns back on blowing cool air again. I called the HVAC guy and he charged me $435.00 just only to replace a pressure switch. Months later, a similar problem began with my other furnace. So I went on Ebay and purchased a Pressure switch costing $125.00 and installed it myself. Now I must say its working great! Thank You.

@willarddickerson921

2 жыл бұрын

Thank you.

@ohioplayer-bl9em

2 жыл бұрын

@@willarddickerson921 Nice work. I have learned so much about furnaces with the help of this guy and others on KZread. I have always been mechanically inclined but watching experienced folks helps out so much. I have replaced almost every part of my furnace the last 2 years.. in fact I have a spare ignitor now so if it breaks I can fix it right away. Next fall I may try replacing the entire thing as I know the heat exchanger is probably going to go bad sometime. It's 15 years old and that seems to be the life of appliances nowadays unfortunately.

You are a lifesaver for me, twice!! Again, today my furnace was blowing cold air. Followed your steps and the problem is solved. In addition to your steps, I'm glad u mentioned what could be causing this. Checked my filter and it looked exactly the same and then I remembered that my wife had gotten few new jars of a candle which we have burning. Time to have a conversation with the wife about the candles :-). I'll make sure you donate to your page directly since your advice has helped me twice now. Thanks again!

I had the same exact issue. Followed your video step by step and it worked! You saved me hundreds. Thank you!!!

Great video! I was able to troubleshoot my son’s furnace when he experienced no heat in his home. With a newborn in the house this vid came in the nick of time! Thanks so much!!

I realize you put this up something like 3 years ago but you just saved me. I don’t have the same type of switch like you so mine was easier to reset but thanks to you I knew what to look for. Then I was able to look up how to reset mine. My furnace actually has 2 of these. Anyway, thank you so much.

Thanks for helping! That was a great video and you saved us on a VERY COLD night!! We are now your #1 fans!!

This guy knows what he is doing. I fixed my furnace on 10m. Thank you sir. Keep sharing more videos

Im an HVAC 3.89 grad and mine just did this. The school never taught us this could happen. I was going nuts trying to figure out wth was wrong. Totally overlooked the filter. Problem solved. TY dude

i love this guy. he's so detailed but straight to the point.

@JohnWayne-86ed

Жыл бұрын

No he's not... the story about his wife blah, blah, was unnecessary filler.

Wow! You have a KZread career my friend. That was amazing fast, funny and saved me a lot of money! You deserve a lot more than just this comment!

in April of 2020, our furnace started blowing only cool air through the house. A little Googling and I landed at this video. It fixed it and the process only took ten or 15 minutes! I just wanted to say thanks! Saved us the hassle of having someone out at the beginning of the pandemic and saved a bunch of money.

Great video. I was able to fix my cold air blowing furnace with the help of your video. Thanks for your help.

thank you so much for your videos. I sure wish I had found them last year. i'm a 60 yr old grandma who honestly doesn't know anything about mechanical things. i'm actually afraid to touch anything that uses electricity, gas, propane, etc. i'm afraid it will blow up. last year I practically rebuilt the front of my nordyne 90% propane furnace in the middle of winter. my electric bill doubled while I replaced almost everything trying to get the furnace to work. I kept getting different combinations of red blinks after I would replace a piece. I finally got it working and it was ok until a couple of weeks ago when I noticed that it was pouring cool air out of my floor vents again. this time the furnace would fire up and then the flames would go out after several minutes. sometimes the flames would stop burning where they were supposed to burn and an orange flame would light up inside one or two of the burner tubes. no actual "blow back", but the furnace would shut off after a few minutes and just cool air would come out of my vents. it would try to recycle but the same thing would happen. I found your videos and noted a lot less that I could replace this time around. I had a yellow blinking light which on my furnace means a low flame fault. I bought a new flame sensor because I was able to rub some gunk off of it but about 2/3's of it was blackened and would not clean off. I put the new flame sensor in, turned on my furnace and it seemed to stay on a little longer than the first time but still faulted out to the blinking yellow light and the cool air. I checked your videos again and started taking the burner box apart to try to clean the burners. got to a point where my available tools wouldn't allow me to continue--can't reach 2 of the screws on the right side of it. i'm trying to loosen things to a point where I can reach in and clean the burners on the right side without removing them. I cleaned the orifices in that bar from the gas bar in front of the burners. the burner by the flame sensor was blackened and I can't seem to get that clean either. I'm going to try to clean the condensate tubes too. I think this is all I have left to try unless you have any other ideas. it's been pretty cold here in the upper peninsula of Michigan as i'm sure you know--below zero wind chills at night and we've gotten so much snow that my garage just collapsed early this morning. so as you might have guessed....there's no new furnace for me any time soon. thanks again for your videos. you do a great job of teaching at the right level and showing us everything that we need to see--so many others just tell us what they've done but don't show the video. The only other comment I have is.....you don't happen to have a single father who knows as much as you do about all of this, do you?

Thanks Bro, you saved the day! After first snow in Minnesota yesterday, furnace stopped heating and I had called for service but they did not show up because it's a weekend and they had a lot of calls. So we have been cold all day and I decided to search on youtube and came across this video around an hour ago. It's 11 PM now and after a couple of wacks to the limit switch, the furnace is running again and heating the house!

@WordofAdviceTV

4 жыл бұрын

That's what I like to hear! :) Glad I was able to help a fellow Minnesotan! It was snowing all day today too. Thank you for leaving a comment, stay warm!

perfect video, good audio and clear explanation, easy to understand. no wanna be comic or useless personal information.... like oh here is my dog spot.

Thank you so much for this video. It was very informative and clear to understand. You helped me diagnose and fix my furnace issue within minutes and saved me hundreds. Very well done!!

Very nicely done. Good humor, good content. Most appreciated!

My heater was out for about 3 weeks and when I went online and watched this video for just 5 minutes, I was able to followed the first few steps and now my heater and up and running again. Thank you for sharing knowledge!

Thank you so much! I removed the limit switch and gave it a few firm taps with the end of my screwdriver. All good! Thanks again for taking the time to make this video

As always, another awesome video from your channel. You helped me fix my furnace this morning in 5 minutes. Turning the furnace off, let it sit for a few seconds, and turning it off cleared the error code and just like that, I now have heat again. Appreciate your advice!!!

Exactly what happened to mine. This saved me so much time its insane. Fixed in 5 mins on my first search on KZread. Thanks for putting this together.

Coldest day of the year in TX and the furnace goes off. Thank goodness for KZread and this guy’s wife.

Thank you! Great video! Woke up this morning and the thermostat was at 57. Watched this video while my coffee was brewing and was able to fix it.

Thank you so much! This is exactly what was wrong with our furnace! Such an easy fix. We're very happy we didn't have to call a repairman.

@WordofAdviceTV

4 жыл бұрын

Glad to hear that! :) Thank you for leaving a comment, stay warm!

You are a genius and a Godsend! This was my problem and all I had to do is tap the end piece of metal and it fired right up. Saved me a hundred dollar service call for a little blood, sweat and wine lol

Just wanted to say thanks because this just fixed my furnace

My goodness. Thank you so much for the tip. Banging didn't work initially so I took it out and tap it few times and put it back. Viola! Works! Thank you so much! Wow!

Thank you! Haven’t had heat for a few weeks and this is all it was. I though I was going to have to fork out a bunch of money to get it fixed.

@WordofAdviceTV

5 жыл бұрын

Happy to hear you were able to get it fixed! :) Stay warm!

Thanks for the info. This just happened to me this morning. My filter did not look dirty at all and was not my usual time to change it. I changed the filter anyway and so far everything has been working.

This is the second time I've watched your videos and found and fixed my furnace. Thank you and God bless you, young man 🙏

@WordofAdviceTV

4 ай бұрын

I love to hear that the videos have been helpful! Thank you, I receive the blessing and may the Lord bless you and yours as well!

Thank you so much for this vid. I have a baby and the heater is not working by doing this the heat is back on in no time. Your a lifesaver

Thank you. The Fonzie move worked like a charm. Heat's back and zero dollars spent.

@jamesb4186

3 жыл бұрын

Perfect way to put it! Worked for me too!

@ddeep1830

2 жыл бұрын

This worked for me, too. You saved me up in Minnesota.

What a great tutorial! There I was at 12am trying to trouble shoot my furnace and this video saved me from a cold morning. Easy to follow and great info. Thanks!

@jameshorn5895

Жыл бұрын

😅 12:08

Thank you Mr. J, this video helped me troubleshoot my heating issues at 2am. Having a celebratory beer in your honor. I couldn’t have done it without you!

Another EXCELLENT LANDSCAPE VIDEO.

Thanks so much. Eight degrees and no heat. We had been cutting a lot of tile in the garage, probably clogged the filter. A few raps on the switch got her up and running. You are awesome, we are grateful.

@WordofAdviceTV

4 жыл бұрын

Happy to hear that! :) Glad you were able to get it fixed and the video helped. Stay warm!

It is currently Christmas Eve, 2022 at 10:52 PM, and this WORKED! We came home to a house at 45 degrees and it has been a super stressful hour or so figuring this out. Thank you so much for actually explaining the limiter and bi-metal, it made sense to me and every other video we watched just said the switch needed replacement. Thank you so much!!

@shelbycarrolz5608

Жыл бұрын

Same exact thing here but Christmas Day! 1st year we got -30 temps and blower stopped. Currently chugging hot coffee and going to tackle this. As you Said 1st video that was thorough and didn't just say calm your hvac as we all know on Christmas day a simple fix could cost thousands just to have someone come. Thanks for the video OP!

This video along with a few others from YOUR channel saved my icy behind tonight! You are so thorough and made this easy to understand. Thank you thank you thank you!

This solved my exact issue and now I’m warm and probably saved a few hundred! Thank you so much!

Very nice, clear and concise presentation. Thank you for taking the mystery out of diagnosing this problem. Can't understand the "thumbs down" must be very insecure folks! Thank you again!

@warrenmeadows4792

Жыл бұрын

Thumbs down was a furnace repair man.

Buddy, all I can say is that my house is warm right now because of you, thanks and keep up the good work man ✌👌👍

@WordofAdviceTV

5 жыл бұрын

Happy to hear that! :) Stay warm!

Hello man. With your videos and recommendation, I found myself a replacement blower motor. So far, it runs smoothly, better than my previous one. Really appreciated!

this video solved my issue! Noticed the furnace blowing cold air for hours and knew something was wrong. I changed the air filter, which was dirty from the past three months, I also forgot... but I couldnt find anything that would fix the problem until I found this video. Thank you so much!

I only can say thank you so much God bless you and people like you I have no idea what to do, watching couple video , tell me what to do , and when I start watching your , I said naaaaa can’t be that simple You save me Thank you

Middle of night our house was so cold and heater was blowing air but it wasn't hot. We watched this video and found out that it was overheated like you said and we hit it with the end of a screwdriver like you said and boom! Hot air! It worked! We changed out our filter now because it was indeed dirty and needed changing. Thank you for saving us money and from having a very cold night! Awesome video!!

@WordofAdviceTV

4 жыл бұрын

I'm happy to hear that the video saved the night! :) Thank you for coming back to leave a comment, stay warm!

@ostojic494

4 жыл бұрын

I had a same thing I didn't replace my filter yet (i will) its 5AM but right now it's working thank you!!!

Thank you so much this saved my family $300 (after hours repair est.) and it was 10°F today! Who said hitting never solves anything?

Thank you SOOO much!! Single mom with 2 kids and thanks to you we now have heat!! You explained everything so well and easy to understand!! So grateful!!

Great video. Saved my day! I had the same issues, and following these steps resolved it.

Jay thank you so much for this video! This exact same thing happened to my furnace and I was able to fix it myself, which was super helpful as we are about to get historically low temps this week in Chicago, may get as low as -55!! Thank you again this video was great!!

@WordofAdviceTV

5 жыл бұрын

Happy to hear that! Stay warm :)

I’m just want to said thank you so much 4 your help and information. I’m just got my hvac license and watching your videos is really helpful.

THANK YOU THIS WORKED 4 BEEPS CHANGE THE FILTER AND TAPPED THE PART! WE NOW HAVE HEAT!

You’re a legend!! I was determined to fix this today and this trick worked for me. Thank you!! I’m so hyped right now!It was mad cold in my crib.

@WordofAdviceTV

4 жыл бұрын

Great!! That's what I like to hear :) Stay warm!

Thanks man! This is exactly what was wrong with my furnace. It worked great! I owe you a beer

Christmas day morning and your video helped bring us heat! We overheated and shut off... Overnight, temps hit -15°f/-26°c, we had a ton of drifting snow, and our outside vents had snowed and iced over. Knocked off the ice, reset the switch, and we are celebrating a better Christmas thanks to you!

2 am, heater blowing cold air, thermostat reading 68°, thank God i found your video. Now the heater works like clock work, thank you man and God bless!!!

This morning my furnace would blow cold air. Watched your video, changed filter, tap the hot limit switch as you’d mentioned in the video. It’s working great and blowing warm/hot air. Thank you!

The 155 dislike must be people who run a heating & cooling business? LOL

@andrettibuffone5508

3 жыл бұрын

286 today , December 2 2020 .LOL

Ok, you are an absolute legend!! Dog hair plugged furnace filter was the issue. Fault signal was high limit stuck open . Took it out and tapped a couple times. Reinstalled and then furnace fired right up. Thank you for saving me $200 and teaching me this !!!

Hi Jay, I’m late comer but love your videos and teaching so much. My furnace blows cold air so I get you on Tube. I did. Clean the sensor check continuity and voltage on the hi-limit sensor but still no flame burn. I was so puzzled why I heard ignite click click.. but no flame comes out😝😞😜 Then I looked around I saw the gas pipe switch turned sideway not straight down, I laughed my heart out with joy then turned it on, voala, now flame comes bursting in furnace and I got heat👍🤩🤩🤩 thank you very much Jay. You’re super teacher. Thanks a million 👌👍👌🤩🏈🇺🇸

Thsnk you!!! This worked for me it was my filter too then tapprd the switch and boom warm again. I really appreciated the video

@WordofAdviceTV

4 жыл бұрын

You're welcome! :) Thank you for leaving a comment, stay warm!