FRONT Wheel Bearing Replacement (DIY / How To Tacoma)
Автокөліктер мен көлік құралдары
Hit that LIKE and SUBSCRIBE!
Check out my store: store.kflo-krib.com
Find the products I use and many more FREE PRODUCTS FOR YOU on
amazon.com/shop/kflostacomabuild
Support my channel on Patreon: patreon.kflo-krib.com
Get yourself a T-Shirt! teespring.kflo-krib.com/
#ToyotaTacoma #ManualTransmission #Engineer
Пікірлер: 94
Here's the link guys: Wheel Bearing: amzn.to/3pFlTam Seal Puller: amzn.to/34fQYKn
Recouping from a heart attack. I’m watching this video for like the third time I feel like I was right there with you working over your shoulder. Thank you for the videos. You are the best on the tube.
@KFloTacoma
Жыл бұрын
Stevan, I appreciate you watching and supporting the channel! I wish you a speedy recovery - happy holidays as well!
Great job man, your the only one that did it the right way! I couldn't find any other videos with replacing the oring.
Thanks for putting out such great content .I can always count on your channel to help me get through my DIY taco projects ...I got to deal with this one RN...
@KFloTacoma
Жыл бұрын
Thanks for watching and supporting the channel brother! Good luck with the job
I can't thank you enough for the fantastic content! There couldn't have found a better resource for my at home maintence.
@KFloTacoma
Жыл бұрын
Awesome, I'm glad my videos helped! Thanks for watching and supporting the channel!
Enjoy amigo! An excellent beer choice as well! Everytime I am looking for how to do something your videos comes up, I think it's time I pony up some cash for your fund! Keep up the good work and wish me luck on next week's front diff core swap!
@KFloTacoma
3 жыл бұрын
Much appreciated my brother! Good luck with the core swap! I'm glad my vids have helped!
Thank you my brother, very helpful and much appreciated by providing the torque amounts!
I love that you put on the torque specs. Thanks
You seem to have the right tutorial just when i need it most lol, thanks!
@KFloTacoma
3 жыл бұрын
Glad to hear it! Thanks for watching and supporting the channel!
Thank you bro! You out here looking out for us Taco bros, thank you and god bless!!
Great video. I'm doing this job for the second time in 18 months because I didn't do the seal on the back the first time - don't get tempted to skip that! I had trouble bracing the old hub to get the axle nut off, the wheel studs would rock on the jack stand making it hard to get good leverage. One easy way to do it is to simply put the brake rotor and calipers back on and get an assistant to hold the brakes while you crank on the axle nut with the breaker bar. Thanks for the video Flo!
@KFloTacoma
2 жыл бұрын
That's a great idea with using a buddy to hold the brakes! Thanks for watching and supporting the channel
@benpowell4128
2 жыл бұрын
Another trick: Put your lug nuts on to protect threads. Then Place a long pry bar between two studs and then place the jack stand under the end of the pry bar. This keeps the truck from rocking excessively and allowed me to get my torque spec without having to put the brake rotor on.
@samwoodberry6430
Жыл бұрын
I'm a carpenter, so I just cut a chunk of 2x4 and wedged it between the seat and the brake pedal.
Great video, very thorough. Just an FYI, wheel spacers cause premature bearing wear. I found out the hard way. I bought the correct wheels with the right backspacing and offset. They look better too👍☺️
@KFloTacoma
Жыл бұрын
Thanks for watching and supporting the channel! Technically backspaced wheels do too since it's basically pulling the tires further away from the wheel bearing and introducing the similar stresses. Regardless though, I do have proper offset wheels now with 35's (which will definitely wear the bearing due to higher stresses introduced by the larger tires, part of the fun thought right? LOL). Check out the fitting 35's vid: kzread.info/dash/bejne/ooJ2xM-fYLLPl9Y.html
Excellent video. Very useful.
@KFloTacoma
3 жыл бұрын
Glad it was helpful! Thanks for watching and supporting the channel!
Great instructions step by step .
@KFloTacoma
Жыл бұрын
Thanks for watching and supporting the channel!
I was able to remove the wheel hub without using the special tool, used a big flat screw driver and it worked perfectly, maybe because I live in SF California trucks don’t rust as much here, compare to other states.
@KFloTacoma
3 жыл бұрын
Yea, you'll see in the video that the passenger side was much easier. I was able to take that side off with just a hammer. All that mud + Water got in between everything and seized up the mating surfaces
Perfect timing. The wheel bearing on my Tacoma just went out
@KFloTacoma
3 жыл бұрын
Good luck bro and thanks for supporting the channel!
if you put a spacer between the bolts after you break them loose, you can press the old bearing out, saves hammering.
@KFloTacoma
Жыл бұрын
Great Idea
Love your views buddy 🤙
Good Video
Nice video, this will be a great help to me as I attempt on my 2000 tacoma 4wd. Could you provide more info on the new bearing assembly you used? I'm having trouble tracking one down for my 2000 tacoma.
Good job man, very informative. I am about to do it on my 2008 4Runner. Before I saw your video, I did not think to replace that larger seal from other side of the hub, where axle enters the hub/bearing assembly through the knuckle. Is this always must to do when replace the hub/bearing assembly on the front of the rig? I did order pair of Koyo's and they will come with o ring and the seal. The reason I am asking is this procedure does require extra work to be able to insert that large seal from other side of the knuckle.. Thanks in advance!
Great video. Thanks. Have any plans to do a video on valve cover gasket?
@KFloTacoma
3 жыл бұрын
Thanks for watching, to answer your question not on the short term. My videos are typically released as I do upgrades and necessary maintenance. I do have that on the list
If you are doing this job. You should take all precautions to not brake that speed sensor. At my auto store they wanted 125.00-250.00 each for new ones. They are like plastic gold. Don’t brake them.
@KFloTacoma
2 жыл бұрын
Oem as well as local shops are definitely gouging the prices. They are about $20 a pair from Amazon amzn.to/3mcrxPv
We're the wheel spacers the cause for wearing out the wheel bearings?
What was the seal for the driver side front? Looking for that seal
Kflo, Can you do a video of how to inspect and identify which wheel bearing is bad.
@KFloTacoma
2 жыл бұрын
I do a rough check at 1:43 - you can put the truck on jack stands and you can push on the tire at the top and bottom as well as the side to side. If it rocks, back and forth like how you see at the time stamp, it's definitely time to replace
How do I separate the wheel hub from the wheel bering
Still another very informative video..#10 Couple of questions After doing all that to remove the hub assembly did you give any thought to replacing the axles at the same time? And you didn't mention that the replacement part was a Hub/bearing unit preassembled part.. Did you post up the part numbers ?
@KFloTacoma
3 жыл бұрын
Hi George, to answer your questions: That axle still has a lot of life left, there's only about 40K miles. That was swapped brand new when I did the ECGS bushing replacement. The assemblies are on my amazon page, under "Wheel Bearings". Thanks for watching and supporting the channel!
Looks like your front driveshaft has 1 zerk in each U joint. Ive got a 2014 4x4 TRD and there are apparently no zerks on either Joint 😮
oem front dust shields are only $20 per side from dealer in Canada just bought 2 of em , so in the USA that would be around $2.99 each lol , they probably quoted you for rear backing plates they are around $140
@KFloTacoma
Жыл бұрын
Dealers in the US have it at around ~$60 - $80 each. These are for the fronts. Here's a link: parts.woburntoyota.com/%2Fp%2Ftoyota__Tacoma%2FBrake-Dust-Shield-Right--Front%2F66806312%2F4778104050.html
Part number for the O Ring?
So glad I live on the west coast
@KFloTacoma
3 жыл бұрын
I wish I lived in the west coast - LOL
If the studs are two short. Why can’t you cut them off and drive out the splined end and replace them with grade 8 bolts that will take more of the pounding that you are gonna give them.
Got any vids on engine work etc...
@KFloTacoma
2 жыл бұрын
I have a few, I would recommend browsing this channel as there are work ranging from belts to seals
How did you remove the broken off piece of that abs sensor? Mine was siezed af and snapped like a twig
@KFloTacoma
10 ай бұрын
I used a pin punch from the inside
That's a ton of dirt intrusion in the spindle
How has the wheel bearing held up? I’ve read some bad reviews that these bearings don’t last. Any input? Thnx
@KFloTacoma
6 ай бұрын
In all honesty, ALL the IFS wheel bearings don't last. These ones I had lasted about 22 months with my 35's and 1000 lb 4 wheel camper. My buddy who has OEM front wheel bearings with 40's lasted only 20 months. At the end of the day, these front wheel bearings wear very fast unless you have stock size tires and setup
Did this to put gussets on my 2020 after bending one at Moab. Have you ever had issues with the dust guard--- ?? Mine rubbed the rotor so I had to tweak it a bit. Pain in the ass
@KFloTacoma
3 жыл бұрын
I haven't had that issue, they are sheet metal though so I would do the same as you and just bend back the parts of the dust shield that's scraping the rotor
You got a video on tie rod ends
@KFloTacoma
2 жыл бұрын
Yessir, kzread.info/dash/bejne/kap4yLiJc6SdgNo.html
should you just replace both sides if one is going bad or just doing one is fine. Also, how do you determine whether you need a whole new assembly or if you just need to press a new one in?(im 2wd and offroad often)
@KFloTacoma
2 жыл бұрын
You can get away with just replacing the one wheel bearing. What do you mean by assembly? Are you talking about CV joints as well?
@alexmlo1
2 жыл бұрын
@@KFloTacoma no, I meant the bearing cylinder piece on the inside. I ended up just replacing the entire assembly myself and saved some cash. Thank you anyway!
18:15 what is that part number
I have a 2010 Toyota Tacoma TRD. Front driver side tire bounces like a basket ball when driving, took it to the dealer and after replacing the drive shaft I still have the bounce ( speed is irrelevant). Replaced the front tire but no use… any ideas?
@KFloTacoma
Жыл бұрын
Did you get your wheels/tires properly balanced? did you try swapping the rear wheels to the front to completely rule out the wheels? Is that strut leaking? it could be that your strut may no longer have the fluid to dampen
What happens when you have a bad wheel bearing??? thanks!
@KFloTacoma
Ай бұрын
Check out one of my newer videos on the front wheel bearing analysis: kzread.info/dash/bejne/gnqFlcWJd7C2e9I.html
@gomez619
Ай бұрын
@@KFloTacoma What happens to the driveability of the truck? What happens while driving it if you have a bad bearing? thanks
I think you could have disconnected the bottom of the knuckle and been able to move it around enough to get the seal out.
@richkostner3381
10 ай бұрын
guess i should have watched a little longer lol
@KFloTacoma
9 ай бұрын
All good bro, thanks for watching and supporting the channel!
What would happen if you forget to add that O ring?
@KFloTacoma
3 жыл бұрын
You'll get water into the hub internal area: which can be trapped and cause corrosion as well as give you an ABS light on the dash if mud gets in there and mucks up the sensor
@danielfuentes7979
3 жыл бұрын
@@KFloTacoma I just installed a TRQ Wheel Bearing assembly but the O ring didn't come in the kit. I will have to disassemble it and add it. I do a lot of water crossing so its a must.
What year it's your toyota tacoma the one in the video?
@KFloTacoma
2 жыл бұрын
2009 TRD sport V6 4x4
How long will this take a professional to do?
@KFloTacoma
Жыл бұрын
I'm not too sure. It's dependent on the shop. Most shops will charge about 5-8 hours of work for this
Did it make any weird rubbing noises over bumps or turns?
@KFloTacoma
3 жыл бұрын
No, there was uneven tire wear and there was a cyclic wobbling noise. What's your suspension setup and tires?
@dylanpayne32
3 жыл бұрын
@@KFloTacoma I have bilstein 5100s with toytec springs and total chaos UCAS and don’t have a sway bar it’s making a odd loud thumping ubbing noise over right turns and large bumps don’t know what it could be
@KFloTacoma
3 жыл бұрын
do you have larger tires? did you do the cmc mod?
Buy some crowsfoot wrenches 🔧
Never see you use a torch to loosen anything
@KFloTacoma
5 ай бұрын
Check out my ECGS bushing video and my CV joint video - I do use it in those
You replaced the passenger side bearing
@KFloTacoma
Жыл бұрын
Yes, I replaced both sides. It's the same procedure
How did you remove the broken off piece of that abs sensor? Mine was siezed af and snapped like a twig
@KFloTacoma
10 ай бұрын
I used a pin punch from the inside