I like how you don't mess around you get the job done I also like how you work and explain everything it's really helpful one of the best videos I've seen in a while on how to

I love the rooster in the background!

Great video! You wasted no time and explained everything. Job well-done! GBL - (owner, 2010 Toyota Tacoma)

Thank you, no one mentions where in the hell the o ring goes and mine was so rusted it looked to be apart of the back of the hub. But you did, I found it and replaced the old junk one. Thank you!

that was literally the best tutorial i've ever seen thank you sir

@FixItPhillip

2 жыл бұрын

Your welcome sir

Great video man. No time wasted and very thorough! Thanks

Thanks for the very useful video. It cleared my doubts.

Great how-to-video. You even told what the difference is between the 4WD and 2WD hubs

You make of it easy work. Excited to stop my Tacoma vibrations 😆

Great video! You are very personable and easy to listen to and, therefore, an excellent instructor.

@FixItPhillip

2 жыл бұрын

Thank you!

Awesome description on replacement...very educational.

Excellent how to that gets straight to the important stuff. Nothing worse than those guys that ramble on for 5 minutes on irrelevant BS. Good job.

@FixItPhillip

Жыл бұрын

Thank you

Thanks so much for making this video. Very easy to follow for first timers

Great instructions , I will be doing the replacement on my Tacoma 2005 next Friday Thank You Phillip

This is a great how-to-do video, thanks!

Awesome video man. Very informative and to the point.

I love this video! When I started playing a few years ago, and finally got my first tube amp and pedals, I was told I would now be forever tone chasing. My next purchase is your delay and OD pedal, as I think this tone is so incredibly soulful and deep! Amazing!

@vr4runner

Жыл бұрын

Are you ok?

i hear a metalic rattle out of my 2018 Tacoma, when i go over speed bumps or turn or go over a rocky road it has a thing metalic rattle. When I go over speed bumps in shopping centers it does it, but only when the back set of wheels go over it never when the front tires go over the speed bump. I'll look for a video of someone doing the rear ones just to see how different they are. Thank you, this video is extremely clear and helpful.

Buenísimo vídeo muchas gracias me ayudó mucho no soy mecánico pero lo hice Tacoma 2017 THANKS

nice vídeo I like how you do the job with out taking off to much parts nice job

If only the bearings on my 3rd gen 4runner was this easy to replace...

🎉 definitely gave a thumbs up and follow. Best video on here!

@FixItPhillip

11 ай бұрын

Thank you

Got my 1 hub changed out in under 2 hours.

Well done

Thanks man

Very nice video but you must be down south. I just replaced my wheel bearing my 2011 Tacoma and everything was pretty frozen had to beat it off with a sledgehammer. It’s a northern Indiana vehicle.

Thank you for sharing this content. Was wondering if u need alignment after installs?

Documetal muy bueno

What wrenches are you using I like the leverage you got

This is the best diy video about taco wheel bearing replacement that I've seen. Good job. One question, what size were the bolts used to push the rotor off? Subscribed

@FixItPhillip

2 жыл бұрын

I believe its s M8x1.25 Metric bolt. Thanks for Subscribing!

@Houndini

2 жыл бұрын

I think that is the size. A must for taco tool box.

@TheMrDamp

10 ай бұрын

Just had to go get this size and it worked perfectly

what size bolt did you use for the rotor removal ?

im gonna follow your instructional video. but i will be on wheel jacks.

@FixItPhillip

4 жыл бұрын

Good job brotha. Ya jack stands will work just fine. Send me a comment if you have any questions! And thank you for Subscribing!

@scottwalker7939

4 жыл бұрын

@@FixItPhillip how to determine whether to buy a 400$ Hub assembly or a 100$ Hub assembly. Are there cheaply made Hub assemblies?

@FixItPhillip

4 жыл бұрын

@@scottwalker7939 yes there are cheaply made ones and good toyota ones and everything in between. The dorman one in my experience is a decent aftermarket one. I would suggest getting it from a local auto parts store instead of online. Just in case you have one fail prematurely its allot easier to warranty it than dealing with online puchase.

Is the process the same on 3rd gen tacomas?

How much does a job like that cost for both left and right?

I had a question I replace my hub/bearing assembly and it set of my abs sensors and pre collision on 2019 tundra . What was the part called that you said the abs sensors reads on the bearing ?

@FixItPhillip

2 жыл бұрын

The back side of the bearing is a built in reluctor wheel that the sensor reads

Can you clarify the size of the threaded bolt holes at 3:30 in the video to help push the rotor off the bearing assembly? I just want to make sure I have everything on hand when I start. Thanks in advance!

@FixItPhillip

4 жыл бұрын

I believe its a M8x1.25 metric bolt. Im happy this video was helpful. Thank you for Subscribing brotha

@FixItPhillip

4 жыл бұрын

Its threaded holes in the actual rotor M8 x 1.25 metric i believe. Good luck with your vehicle!

As some one who was never changed a hub you completely skipped over how to remove the brake caliper ontop of that idk what even bolts you used to help remove the rotor

great video man! there are some on amazon without the o-ring. can you purchase the o ring separately?

@FixItPhillip

3 жыл бұрын

Its just a oring to keep out dust/moisture. I'm sure you can either reuse the original one or they shouldn't be much at the dealer

@donttrip775

3 жыл бұрын

@@FixItPhillip thanks!!

You don’t need to grease them?

I have 155k miles on my 2014 Tacoma. Passenger side front bearing is fine. Drivers side needs replacing.

What how to torque ?

Fantastic video, do you know the cost of that wheel bearing?

@Houndini

2 жыл бұрын

$196 or $198 + taxes price area. For Org. Toy factory replacement. My TK is 4x4 might make little difference. I priced one this evening 05/30/22. Price went up little from last replacement. I have better luck myself using Toy parts appear last longer. But each there own.

Would it be similar to replace a front driver side hub on a 2012 tundra RWD?

@FixItPhillip

3 жыл бұрын

Yes I believe they sell the whole complete bearing and hub assembly pre pressed together like the tacomaand should be very similar

@alainperezmandriotti2912

3 жыл бұрын

@@FixItPhillip I appreciate the info. I ordered the whole hub assembly by doorman. Thanks for the how to video!

What size are those bolts to help get the rotor out? Thanks

@FixItPhillip

4 жыл бұрын

I believe its s M8x1.25 Metric bolt. Thanks for Subscribing!

@hrfb9696

4 жыл бұрын

FixItPhillip Thank you Sir.

@TheMrDamp

10 ай бұрын

M8 x 1.25 confirmed. I just bought some and used them

My wheel. Bearing has this scrapping and friction noise but no play. Anyways i feel the wheel very loose, vibrations and goes to one side........ Are these symptoms of a worn wheel. Bearing?

@FixItPhillip

2 жыл бұрын

Could be starting to go bad. One way you can check is to buy a mechanic stethoscope. Lift the vehicle. Spin the front tires 1 at a time by hand and listen to the backside of the spindle at the bearing. compare the noise and see if one is louder than the other

@041185

2 жыл бұрын

@@FixItPhillip the 2 bearings sound the same like, there is no more lubrication on them.

What can I do if the wheel bearing is stuck once I took off the 4 bolts

@FixItPhillip

2 жыл бұрын

Tap the bearing with a hammer

Where did you purchase the assembly from and what brand did you go with?

@FixItPhillip

4 жыл бұрын

It was premium one from napa, i dont recall the exact part number, thanks for the question, plz be sure to Subscribe! much appreciated!

@TJNC1976

3 жыл бұрын

Did the new hub assembly come with the dust cap that goes in the middle?

@FixItPhillip

3 жыл бұрын

No I used the original one

@TheMrDamp

10 ай бұрын

eBay has the OEM koyo brand for $185 plus tax

Someone can help me with the part number for Tacoma 2011 2 WD genuine part , because the web side show me any options 😢😢😢 and I need the whole part

@FixItPhillip

Жыл бұрын

As far as i know It comes as separate pieces from toyota unfortunately. The hub would need to be pressed onto the bearing

When I drive makes a humming noise but when I make a right turn noise goes away

@TheMrDamp

10 ай бұрын

My truck does the same thing. Thought it was a passenger side wheel bearing but it turned out to be the drivers side. You can tell by spinning the tire and feeling for vibration in the spring above the tire. Also listening for extra noise

59 Ft pounds for the 4 bolts that hold it in

Unicorn Toyota Tacomas this is a BIG NO! not what you see. Good luck everyone with those

Where's the axle?

@FixItPhillip

2 ай бұрын

That vehicle was 2wd.

@ExcelsiorSpringsDrummer_

2 ай бұрын

Oh! Duh haha!!!

Not important to torque the hub bolts?

@FixItPhillip

3 жыл бұрын

Torque them to what your vehicle calls for.

@griggio6

Жыл бұрын

Its very important. Crows foot at 90 degrees to wrench shaft will give you an accurate torque measurement. Just make sure its 90 degrees.

9:10, do you need to crank that hard?

@FixItPhillip

3 жыл бұрын

I'm not using all my force lol. They should be fairly tight

where's the axel?

@FixItPhillip

2 жыл бұрын

2wd

nevermind sorry just watched until the very end.

Torque to spec with a crows foot 90 degrees to torque wrench shaft... jesus christ

Straight to the point and no BS or other useless info. Great angle to show detail of what you’re explaining and doing. Thank you!