Mate, awesome video! Took notes while watching it & then had a crack at the brakes on my BA Ute this morning; went without a hitch due to all your tips & tricks; your mention all the different spanner/wrench sizes required etc really helped me prepare for the job too. Cheers!

@oneupthesleevecustomsautom2195

Жыл бұрын

Great to hear mate !

thanks - great pacing - not rushed and fast talking. Cheers. Going to knock them off this weekend.

@oneupthesleevecustomsautom2195

4 жыл бұрын

How did you go

Good job, thanks. Only gripe is the ads all the way through it.

@oneupthesleevecustomsautom2195

Жыл бұрын

Sorry mate it's the only way we can provide content and make it worth our while :) I'm 1300 videos deep now. Stoked it got your job done. And thanks for watching maye

@oneupthesleevecustomsautom2195

Жыл бұрын

Mate

Very helpful. Thanks for taking the time to post.

@oneupthesleevecustomsautom2195

5 жыл бұрын

Glad it helped mate cheers :)

Thank you for the help!

@oneupthesleevecustomsautom2195

6 жыл бұрын

+Chris Lowe no problem hope it helped

Thanks for the video had a giggle or two♻️ gotta do my Terri cheers good instructions A++

@Oneupthesleevecustoms

5 жыл бұрын

Hope it helped mate cheers

Great video. Thanks.

@oneupthesleevecustomsautom2195

6 жыл бұрын

No stress thanks for watching

great upload works the same on the Territory! thanx man

@oneupthesleevecustomsautom2195

4 жыл бұрын

Thanks for watching mate. Glad it helped

@abdulrazak-ei2ju

3 жыл бұрын

How long take to do the territory? I have an 05 Ghia AWD need to asap...

@patrick9761

3 жыл бұрын

@@abdulrazak-ei2ju well Iit is very easiy I took longer than most because while I was in there I cleaned everything but I would say 30 mins per brake and rotor is about enough time please remember the rotor can be a bit stuck so try to tap it off evenly or spray wd40 in there have a coffee give it a bit of a tap /viabrate then go for it,its one of the fun jobs

Thanks for the video will be giving it a go tomorrow

@oneupthesleevecustomsautom2195

3 жыл бұрын

Let me know how you go. It's a good car to work on fairly simple

Great info mate, worked great on my territory

@oneupthesleevecustomsautom2195

4 жыл бұрын

Sweet hope if saved you a few bucks

@abdulrazak-ei2ju

3 жыл бұрын

How long take to do the territory? I have an 05 Ghia need to asap...

A wheel nut or 2 put on back to front will hold the disc firmly in place while you put the bracket and caliber on.

@oneupthesleevecustomsautom2195

4 жыл бұрын

Less wobble from the rotor

Great video👍. Tanks 😎

@oneupthesleevecustomsautom2195

5 жыл бұрын

Thanks for watching

@gasperajdnik5627

5 жыл бұрын

@@oneupthesleevecustomsautom2195 you are velkam

@gasperajdnik5627

5 жыл бұрын

IS that your truck ad 4:26?

@oneupthesleevecustomsautom2195

5 жыл бұрын

Yeah mate

@oneupthesleevecustomsautom2195

5 жыл бұрын

Old one

mate you brakes must have been binding big time for the caliper to be that tight. There is no wear ridge on the rotor for it to grab that tight on removal either. You could have just taken the lid off the fluid reservoir too instead of undoing the bleed nipple. It's cleaner & you don't have to bleed the system as much afterwards.

@oneupthesleevecustomsautom2195

5 жыл бұрын

I like to always bleed as the fluid often trapped in calliper has been subject to the most heat. Good to let it out

Love the sound of a brushless drill

@oneupthesleevecustomsautom2195

4 жыл бұрын

They go hard

@gasperajdnik5627

4 жыл бұрын

I have it in my workshop, I like it :-)

Hey mate instead of unwinding the bleed valve and getting brake fluid everywhere/losing it are you able to just take the lid off the brake res in the engine bay like you do with the rear brakes to push piston back into place? Sorry if I don’t make sense just trying to figure out a way without touching that bleed valve

@oneupthesleevecustomsautom2195

3 жыл бұрын

Its good practice to not push it backwards through the abs pump as it can damage it. Also it gets rid of the worst quality fluid

Good vid man, can i ask what's the cog behind the disc when you take it off ? I'm trying to work out a weird noise after they replaced my discs. Sounds a bit like wheel bearings but looks like you dont need to undo them...

@teewizz6089

6 ай бұрын

Toothed “tone” ring for abs brake sensor, provides a variable a/c signal to the abs computer according to how fast the wheel is rotating

Suppose the process would be more or less the same for an AU Falcon right?

@oneupthesleevecustomsautom2195

4 жыл бұрын

Yeah mate basicly the same I think series one au might he more like ef el falcon

@gabrielle239

4 жыл бұрын

Yeah mate

@oneupthesleevecustomsautom2195

4 жыл бұрын

Au onwards is heaps easyer than the ef el

I just replaced my front and rear brakes discs and rotors. Instead of removing the guide bolts, i just removed the whole Caliper assembly (2 bolts 15mm), pushed the pistons back, slided new brake pads into the caliper assembly and slid the whole assembly with pads back on to the disc and bolted. I haven't driven the car yet. Is this gonna be a problem?

@oneupthesleevecustomsautom2195

3 жыл бұрын

No issues just give them a few good applications the pads will normally show how to bed them in

@kk99990000

3 жыл бұрын

@@oneupthesleevecustomsautom2195 Thanks Champ. Bed the brakes and seems all good.

@oneupthesleevecustomsautom2195

3 жыл бұрын

She stopping better ? No more warped rotors

@kk99990000

3 жыл бұрын

@@oneupthesleevecustomsautom2195 Way better. Car had a shudder when braking and rear brakes were already squeaking. I just bought the car few weeks ago and a dodgy mechanic passed it in roadworthy inspection with bad brakes and rotors plus completely bent sway bar links. Now need to figure out grinding/rubbing noise from steering wheel(Not rack) and squeaking front left suspension. Not sure why on earth i bought a Ford, Lol.

@oneupthesleevecustomsautom2195

3 жыл бұрын

Have a look at caster bars they have bush at front that squeak

Are the new discs not warping?

@oneupthesleevecustomsautom2195

5 жыл бұрын

sold car at 355 k and they were still great

@The3rdCoat

5 жыл бұрын

@@oneupthesleevecustomsautom2195 do you know what brand they were? I've got a BF with major brake shudder, looking for decent replacement rotors

@oneupthesleevecustomsautom2195

5 жыл бұрын

They were the repco ones mate seemed good

@oneupthesleevecustomsautom2195

5 жыл бұрын

Has alot to do with not coasting to much on the brakes. See heaps with this issue

hey Mate what can be the cause if my ford front passenger side wheel temperature very high and i can smell burning of rubber smoke some time

@oneupthesleevecustomsautom2195

2 жыл бұрын

Have you taken wheel off? Can you see anything rubbing

@sarvarzjjatt9240

2 жыл бұрын

yes i diid wheel take off, brake pad is almost gone and rotor is so shiny@@oneupthesleevecustomsautom2195

@sarvarzjjatt9240

2 жыл бұрын

i took that wheel off and what i noticed wheel seems jam.its not spinning up smoothly as should be

@oneupthesleevecustomsautom2195

2 жыл бұрын

Sounds like a wheel bearing

just curious if cracking the bleed nipples is essentia?.... only asking because i think your the first person ive seen thats ever done it🤔

@oneupthesleevecustomsautom2195

4 жыл бұрын

Stops you pushing crappy old fluid back to abs pump and rest of the system. Dump 200mls out top up with new stuff no risk of damage to expensive bits

@shanemccormick5859

4 жыл бұрын

One up the sleeve customs Automotive awesome thanks for the reply👍

@oneupthesleevecustomsautom2195

4 жыл бұрын

Thamks for watching mate

Great video, but next time it would be much better to get a camera man on the job instead of the gorilla pod!.

@oneupthesleevecustomsautom2195

4 жыл бұрын

Yeah been one man sucks some times. One day i might be able to afford it. Thanks for watching mate

All that work for second hand rotors their 50$ each for good Bosch ones at Super cheap atm

@oneupthesleevecustomsautom2195

6 жыл бұрын

They were free and all but new anyway mate. The 50 dollar ones warp first time you tow anything substantial. It was more about showing the process cheers anyway

@aydentheninja877

6 жыл бұрын

One up the sleeve customs Automotive yeah your probably right they are usually 80 so idk if they any good or not Bosch isn't a bad Brand from my experience but anyway all good

@mvnorsel6354

11 ай бұрын

Yep, just paid $96 for 2 front for a 380.

Ill never by mage noodles to much adds

@oneupthesleevecustomsautom2195

11 ай бұрын

Haha what? Was there mage noodle ads?

Wrong...

@oneupthesleevecustomsautom2195

2 жыл бұрын

Tell me why pls ?

Dont know what dong..

@oneupthesleevecustomsautom2195

2 жыл бұрын

You know much about dong