Free BMW stability control DSC/ESC fix that works perfectly and it's easy to do(HACK🤖) e87 e90 e60
Автокөліктер мен көлік құралдары
Symptoms:
- Sudden the traction control light starts flashing (triangle warning light on dash).
- The engine loses power,
- Anti-lock brakes kick in (pulsing), and the car becomes really hard to control.
Fastest way to fix bmw stability control for your bmw.
ABS Reluctor Ring problem.
You can solve your DSC issues in few minutes for free.
This fix works on all BMW cars with ABS reluctor rings.
Пікірлер: 491
All this cost me was the cost of a cheap garage-jack that I needed anyway. Could have been thousands! Thank you! this is a lifesaver! As has been commented earlier though; make sure to use super-thin washers. A little to fat, and the abs and traction systems go offline and the dash lights up like a Christmas tree! Brilliant video, man! Very helpful! Thanks again!
@68KKC
Жыл бұрын
How thin can the washer be? Can you provide approximate measurements?
@Jan_Boris
Жыл бұрын
@@68KKC I just put a 1mm washer and drove 20km, works fine. If I have any problems with longer trips I will post a comment. If you are installing a new sensor I suggest 1mm to rotect the plastic, if you use the old one then even 0.3mm can work as the plastic is already eaten up and you dont need a lot of distance.
@mercstyles4632
Жыл бұрын
By simply checking each wheel. Lol
I had the same problem with my 10 years old BMW 1 series and I tried this fix and just came back from a test drive. I works perfectly. Thank you!
Brilliant, fixed my 2011 E91 in 10mins. Pickup had clearly touched the ring. Recommend to follow this fix.
This works perfectly!!! What a guy !!! Thanks bro.
Thanks for sharing this information, this problem has happened to me and didn't know what to do without pulling out the drive shaft and replacing the Reluctor Ring. Bravo !!
Thanks for video, did this fix today, removed and cleaned both rear ABS sensors, I also cleaned the ABS ring with penetrating oil, put washers underneath ABS bracket and it worked. Thanks again, highly recommended!
This worked perfectly for my 2010 bmw X3 "581C" BMW OBD2 code . Thank you very much for this video!
I had this issue on my 120d. Warning light, reduced rpm then limp mode. The fix from various garages was between £180 to over £400 ( from BMW ). My local specialist garage did the fix you outline in the video for £70. That was about 20,000 miles ago. Had no issues with it since. :-)
@jinweizhang2209
10 ай бұрын
hi there, would you recommend your local garage to me please?
@russiandrivers9986
6 ай бұрын
Which garage was that?
A thousand thank you. It works perfectly for my 2000 BMW 328i. The mechanic quoted me $2350.
Try the ring pull from a drinks can instead of a washer! Perfect thickness to allow the sensor to still see the ring and allow it to operate properly
Just fixed my problem because of you....thanks!!
Great fix. I have this problem too. I think this could work well. Thank you 👍
Great video. We have two BMW's. and I do the maintenance of them.
Worked great on my 2000 BMW 328 ci thanks 🤗
Brilliant, done it today took both sensors out and cleaned them and the ring added washer it’s working perfect now
Works great on my E81 116i... thank you 👍
Thank you for your video, My BMW 1 series 20d M Convertible had the same problem. I done what you did with a plastic washer. It works fine and when I make the car skid/loose control the traction control still kicks in. Job done 👍
I followed your video to clean my sensors and it worked. No more ABS kicking in all the time. Thank you very much!
@artistadrtm
5 жыл бұрын
Waqas Siddiqui the question is: will the ABS still work when you’ll need it the most? Hope you wont dive into a tree while braking.
@imbehindyou5398
4 жыл бұрын
Adrian - well said, - the ecu deactivates the abs, when u have driveshaft issues without u known, these guy's are trying to hid a major rear-end..
thank you so much for this info! now i can finally fix my Bmw Z3s abs light/ brake light problem on the dash board! :D
Had the same problem on my 120D Coupe...My old eyes thought that the fault light was the A start system / EGR valve kicking in and cutting power !! My local garage looked at the diagnostics and no fault on the EGR and diagnosed the Reluctor ring. Fixed as per your video £70... Good call .. BMW would have changed a shaft.....robbers
Thank you sir . You just saved me some hard earned $$$. Need more videos from you . Cheerz
Thanks a lot. I just have the same problem on my BMW too.
Thank you for your video. I have BMW E90 320i 2009 model. I found your video on the KZread. And then, I can fix same trouble.
Awesome stuff mate! Thank you!
@RegisGarage
6 жыл бұрын
Cool. Thanks for your comment🙏
Great job👍🏻👍🏻
Excellent explanation and creative, inexpensive solution that you explained very clearly. Just subscribed. Thank you!
@RegisGarage
2 жыл бұрын
Thanks L S!
You are great my friend. Thank you!!
Thank you so much mate!
You are a life saver thank you so much I got quoted nearly 900 pounds, and I did this today and it worked thank you!!
@RegisGarage
6 жыл бұрын
Thanks milkeh S for your feedback. I'm really glad it helped
@map1537
3 жыл бұрын
What's that like pesos
@ebercorapi141
2 жыл бұрын
Did you have to reset anything or the light on the dash just gone after rework? Thanks I need to do mine tomorrow
@eranfavorit6466
8 ай бұрын
@@ebercorapi141did it work??
Great video, fixed my annoying Tc light coming on intermittently and losing power!!! Just make sure u don't use a thick washer like I did first time round...made the speedo wobble and brakes lock up when stopping at a slow speed!!! just make sure washer is super thin👍👍👍
I just did it today..my fuxxing car, e90 2005, annoying me a lot!! It works, anyway!!! Great..thanks!!! If anyone has same problem, just follow this.. do it both of rear wheels. Only 1 hour enough to do.!!
@RegisGarage
6 жыл бұрын
Thanks Seok-hyun Jung for sharing your experience with us. I'm glad this video helped you :)
@garyhgaryh
4 жыл бұрын
Is it just for the rear wheels?
@evilsider213
4 жыл бұрын
Seok-hyun Jung do I suppose to do it for all the wheels?
From Mexico with Like You video God bless you my friend keep adding videos say hi to everyone in your country and be safe
Worth a shot!
What size washer to use? Thank you so much for this video
Thanks for this video tutorial. I have 08 750li (E66). The DSC keeps coming on in low speeds out of the parking lot of backing up. Im gonna try this on all four wheels. It is the most annoying thing for this BMW. Appreciate the good video lesson
This is awesome! Thanks mate :D
@RegisGarage
6 жыл бұрын
Yes My DrivingForces. This fix could save a lot of money and time.
Good video bro!
Many thanks for you today I got some problems I was on my way to London
I've got this issue right now! Definitely going to check into this, Thanks!
@lenoxboss4291
Жыл бұрын
What was it did u fif its
@lenoxboss4291
Жыл бұрын
Did u fix it ??
Thank very much, this is really helpfull
Great video!! I did exacly thay u said and it works!! Thank you!! Greetings from netherlands!! Thumbs up
@RegisGarage
2 жыл бұрын
Perfect👍👍
How do you know which wheel it is located on or how many or is it just one sensor? On the drivers side? I'm having the same issue
Sound's great 🤔
@Steff320i
6 жыл бұрын
Sound is great?
Thanks man, it works great and saved me a few bucks !
@RegisGarage
5 жыл бұрын
Glad to hear that 💪
Thank you sir, your tip is good.
Useful video, thanks for sharing.
ur legend man really function!❤️
Wish me luck! I will try this fix tomorrow! I've had this problem for over a year now on my E90. I manually turn off the DTC, and it drives fine. I will be replacing all 4 ABS sensors, and give the reluctor rings, and sensor holes on driver axle a good scrubbing/scraping.
@bash4214
5 жыл бұрын
How it went
@belvedere4918
Жыл бұрын
?
Thanks for the information
Genius
What is the spacer/ washer dia. which you used?
Wow that’s amazing and clever 👏👏
thanks nice video man !
Wish I'd known about this a few years ago. It happened to me when I was travelling to a ferry to drive abroad for a short holiday. I had to take it to my garage and get it fixed same day. I got charged £750
This is awesome....thanks a lot mate!did this and my problem was solved!
Thank you for this this share! I'm having that problem, and will try this. many thanks
@abrolovesyall6920
3 жыл бұрын
Did it work?
So so so so thank you man!
Great upload mate i do all my work on my car is good to see what people are up to 👍
@RegisGarage
6 жыл бұрын
It's really nice to find like minded people.
@sacranie823
6 жыл бұрын
Regis Garage your welcome 👍
Good video
thanks dear , great
Great stuff beat the system 👍
I have this fault at the moment. Is there a way I can tell which tire it is so that I can perform the temporary fix on it? Thank you.
Thank Regis for your sharing a lot. The method works for my vehicle of BMW 09 Series 1.
oh wow bro nice to see you at your new english channel im glad that people realise that creating in english is way better
@RegisGarage
2 жыл бұрын
Thanks :)
Would this issue also cause the parking brake to lock up? I currently have ABS/Traction and Engine Warnings on E84 X1.
Great Video. I got the ring and sensor replaced on one side last year. I now have problem with other side and need temporary fix until eventually replacing the ring there too. I am currently deactivating dynamic stability control every time I drive to prevent juddering.
@RegisGarage
6 жыл бұрын
Hey Alan. Thanks for the comment. I really appreciate it. It’s been more than 3 months after I done this quick fix. I didn’t experienced any problems whatsoever. Please let me know now about your fixing process.
@alanhoward387
6 жыл бұрын
My main concern now is that I have National Car Test(NCT in Ireland) this Friday and this problem may show up. I actually don't mind driving around (at least temporarily) with this issue because all I do is press the DSC button for about 5 seconds to deactivate DSC and the juddering stops. I might try your fix in the next few days.
@RegisGarage
6 жыл бұрын
You are damaging the ABS sensor every time you drive our car. It’s rubbing against the reluctor ring. It’s best to move sensor As Soon As Possible in order to save the ABS sensors life :D
@RegisGarage
6 жыл бұрын
After this fix your DSC will work normally. You'll pass your NCT with flying colours.
@alanhoward387
6 жыл бұрын
Very true Regis Garage. Good advice.
What I did after this hack , took wire wheel to axle then treated it with rust conversion, then painted it. I check it every spring, and touch up as needed.
Good to know TY
Sounds like the wheel bearing is causing a ring/sensor contact issue. It probably will drive a long time like that however.
Just spray PB Blaster on the Ring ! Magic
Can you tell me what inch spacer you used?
What size washer do you use iv got same issue with my 320d touring 2012
Lincoln mkz Some times thanks enough I don't know how I would thanks for this video Dealer said it cost you 2'300$ When I tried it all works for me, thanks for your very helpful video
@BackAgain..
4 жыл бұрын
But the question is - Which Tire? I have 2013 328i xDrive 4door Sedan.
ABS sensor control brakes and give informations to DSC ( Dinamic Slip Control ) which contol intake throtle . Is not breaking the wheels
washer on the bolt is a better option as the spacer will let dirty and damp in
I had this exact problem with my BMW-320. This problem is temperature dependent too. Since the magnetic HAL-effect (which is the principle for a reluctor-ring to operate correctly) is varies greatly with temperature. My problem started 2 weeks ago when the temperature here in Bergen / Norway dropped under 0 C. (I'm just mentioning this if hasn't been stated in the comment already; too lazy to read them all).
@esmaillutfi
4 жыл бұрын
Hei man. I have the same problem with my BMW116. I got quoted 23000kr in Oslo. How did you fix it in the end?
@GisleVanem00
4 жыл бұрын
@@esmaillutfi 23000 NOK is a rip-off!! I paid 5000 for a sensor-ring + 2 sensors.
How do i know which tire have a problem?
@siak3438
3 ай бұрын
good question
i have this on my dash, would this cause my car to stall underload as that is whats happening at the moment!, i will definately try this!
Do you have to do this for all wheels? Do you think think can work for a 2013 BMW X3 Xdrive28i?
I have an issue with my 2016 F21 116d Sport. It doesn't happen all the time, but every 7/10 drives on average it will malfunction completely and the DSC is permanently disabled, meaning I also can't use cruise control or eco/sport/sport+ modes, unless I pull over, turn ignition off and start engine again and hope it doesnt happen. I find it happens if you slip the clutch a lot coming up out of an incline from a standstill. It also will just happen randomly cruising on the motorway and boom "DSC malfunction" into "cruise control failure" and I have to drive myself then. I might give this a go and hopefully it fixes the problem.
What if you change both sensors and the disc malfunction comes back on? Thanks
The problem with E87 common problems is that there’s a lot of common problems
Very nice !
@RegisGarage
6 жыл бұрын
Thanks Paul ;)
I got exactly the same Problem, but my obd tool shows 3 steering angle sensor errors. Could it still be the abs sensor or should I try to clean the steering angle sensor?
ok, thanks Regis
These type of tutorials are a nightmare to garages!
@mitchellheightsvet
3 жыл бұрын
And a saviour to folks struggling or supporting a family. This is a car note so mom has a ride to work every day, and she also picks the kids up from practice after school. It'll balance out I'm sure. Plenty of heavy problems that go wrong with BMW that isn't so easy.
What size spacer to use?
How thick is the washer i put a washer in. Can it be to thick or check somewere else?
thanks a lot .. with BMW X3 All Wheel Drives I have to make it for 4 Wheels ?
Which models does this fix apply to? The video seems to show a car that is pretty mangy and generally lacking in maintanance (some of those suspension components really should be replaced).
Yo Regi, Don’t u need a diagnosis to know wat wheel?
Hi, I have a 2011 BMW 740LI, my car has been down powering on me while driving, along with a saying DSC malfunction engine chassis stabilization reduced. Once I turn the car off and back on the malfunction goes away and I can drive again for a couple days until it does it again. After taking it in to BMW having them do a diagnostics check they’re saying I need a new DME which costs about $2500. Is this something I should do with my car first before I spend thousands of dollars on a new DME, please let me know what you think. Thank you very much
Excellent
@RegisGarage
6 жыл бұрын
Thanks ;)
I’ve been doing a lot of burnouts recently.. good chance I broke it lol
What side is the sensor on back driverside or passenger side
Thanks
Looks like he used a Copper Crush washer that's sandwiched between a Brake Caliper and Brake Hose Line. Looks like a brilliant temporary fix.
isit one wheel only or do we do all 4? i have this exact issue right now lol
Hi guys, probably a sill question, is the DSC sensor on both sides, front left and right?
My DTC light is on, but no ABS or loss or power. Only thought, and garage said was linked to steering calibration sensor.