Sam, thanks for the information on the hood that is found on the FAE shredder. You cannot really tell that the FAE has an adjustable hood because there is no visible ram--it’s a chain mechanism on the inside--but it works, as you say to put the chips where you want them. Great videos--I learn things every time I tune in. Thank you!

Great video man! Sure makes nice looking chips! That was a mess big difference after a few hours cleaning up!

Wow Sam that lamtrac makes short work of those logs.that one heck of a machine.

Nice to see the new rig working😃. You were not bouncing around in the cab like the ASV, looked smooth and very capable. I sure wish I had one more of me, you two are a great team and fun to watch, thanks for sharing Sam 👍👍👍

@robertcotrelljr8573

5 жыл бұрын

Rocking K Videos bouncing? Like an ASV?

@rockingkvideos3160

5 жыл бұрын

Robert Cotrell JR a while back, Sam checked out an ASV unit and between not being used to the suspension design, the terrain and or the controls he was bouncing around in that rig more than the TL12, not sure why and only have two or three videos from inside a skid steer from Sam.

@robertcotrelljr8573

5 жыл бұрын

Rocking K Videos I’m really asking because that’s one of the huge pluses to ASV they rise really well.

@rockingkvideos3160

5 жыл бұрын

Robert Cotrell JR Are you looking for a new machine? I’m a DIY land owner looking to add a skid steer to my tool box. I have several friends operating Cat299’s, ASV RT120’s. Not sure where you are located or if you have local options to check out a few different machines like I did, I think you will find the TL12 a very nice unit. I do not have a lot of experience and am not a pro, but I do ask a lot of questions and am looking to make an informed decision when buying equipment. I am not done with my research, probably never will be🙄. Try as many machines as you can and see what they do best for what your needs are.

The new BIG DAWG showing what it can do. Nice

Very nice and clean ! Awesome job 👍

@VBELTandSON

5 жыл бұрын

mikestrucks thanks mike! How’s the Vbelt mug holding up for you?

@mikestrucks

5 жыл бұрын

V-BELT and SON great ! Keeps the coffee hot for a long time 👍

Great job, maybe you can show us some day the inside workings of some of the those machines!!

I like the idea of putting two big logs on each side staying in one place and also protecting the throwout

Good running skidsteer man!

Put some Dawn dish soap in a spray bottle with some water, mix it up and spray where hydraulic fluid hit the paint. That will stop the hydraulic fluid from rusting out your paint so quickly.

Keep showing us these nice video how awesome the takehuchi is I may end up buying one 😎

@VBELTandSON

5 жыл бұрын

Fosters Firewood & Equipment Services yeah I just looked at my phone videos I had some more actual vids not time lapse I forgot to share in this video. Haha not bad for a skiddy :)

@sprucegoose1016

5 жыл бұрын

V-BELT and SON works very well👌

I run a overseer 100 with a second head. 5 days ago the side cab glass broke out and I have been mulching without it. Wow it really sucks when everything gets sucked into to cab,🤣 any ways I really enjoy your videos

I thought I spent money!! Beautiful new rig buddy!

@VBELTandSON

5 жыл бұрын

workplaytv haha I still haven’t caught up to you! Where you been brother? No posts

@workplaytv

5 жыл бұрын

V-BELT and SON I know buddy been mia! Issues with trailer abc other stuff. Be back soon.

Impressive

You can take a little of the jumpyness of the loader arm controls by turning out your priority valve. That’s what I did on my 12v2. It made it to where it doesn’t beat you to death...as bad lol

@VBELTandSON

5 жыл бұрын

Aaron Gasque yeah I need to toy around with that. Used it a few more hours I got a little smoother. Not so much rookie level but different than what I’m used to

👍👍👍👍

Wish I could run a mulcher on my place but the rocks are just too big and too plentiful. I might consider trying the FAE stone crusher attachment and see if it will shred wood along with the rocks.

I wish I had dry stuff to mulch here in PA. Spent 2 hours this morning and all I did was make a mess of the the poor machine

Cool Videos Sam. Could you explain the differences in Heads & Teeth setups, i'm watching from an earthmoving background

@VBELTandSON

5 жыл бұрын

MrJimsparky yeah I’ll do that for next video with the machines 👍🏻

I’d love to see more mulching video see all the projects you guys do

@VBELTandSON

5 жыл бұрын

Cody Baldwin more on the way now that summer is almost here🤘🏻

@codybaldwin7854

5 жыл бұрын

V-BELT and SON sweet can’t wait man

121st like. Thanks for the entertainment.

That's one thing I like about the FAE is the chip dispersal. My prinoth doesnt do a great job at it, but the visability and manuverability is better. Just throw both of those heads on the trailer and use the tak with both 🤷‍♂️

@VBELTandSON

5 жыл бұрын

Fire Skid used to do that. One machine two heads. Got tired of swapping the heads back and fourth. All to happy to just hop into another machine and save some and energy. Is the Prinoth head the same drum as the awhi?

@fireskid5217

5 жыл бұрын

Ya, it's the same drum, just the new design.

V-VEBT ans SON Is there a certain brand excavator grapple you like?

Last one of the 3....🐌🐌🐌

👍👍👍👍👍🤪

The Lamtrac was just helping lubricate the earth with its hydraulic leak. Cant have the earth stop spinning now can we?

How long until we see videos on the second gen. Are you going to do anything to the pump for more power?

@VBELTandSON

5 жыл бұрын

Wisconsin Dairy Farmer soon and yeah pump gonna do fun stuff

You have the camera set up just right Just great

12 looks great but that recovery timing after each run is horrible, do you think ASV 120 has same running stroke issues

@VBELTandSON

5 жыл бұрын

Reserved 100 that was half throttle warming up in first couple clips. Had to adjust the machine some more. Full throttle is a must with it.

How’s the temps looking on the 12? It’s in the upper 80s here in the Dallas, TX area today. We are on a pretty thick clearing job and already dealing with overheating

@VBELTandSON

5 жыл бұрын

Mitch Himes filmed a clip of it with gear gun. Temps going into hydraulic cooler were 124f. Outside temp was 65-70. Ran for more than an hour. Will be adding extra cooler for sure when summer really hits here. But so far so good

@MitchellH79

5 жыл бұрын

Wish it was still in the 60s here... good’ole Texas summers 🥵 Any recommendations on an aux cooler? I’m thinking that will be next on our purchase list.

We are looking at the t12 is the. Is the carbide that much better then the knifes ??

@VBELTandSON

4 жыл бұрын

Way tougher. Doesn’t cut as well tho

Have yall ever run a fecon head? Have ever run a large rubber tired machine like a pretence?

fantastic work! im not a fan for cam on board i want to see action of mulcher,

Is most of your work to prevent 🔥 I think California as laws for land owners to keep under brush down?

@VBELTandSON

5 жыл бұрын

John Hurt some of them are for fire prevention. This one had a dozen dead dangerous trees that were following over on their own.

V-Belt? I was curious in one of the earlier videos did you speak about the Kubota? Asking because I just wanted to hear feedback on how they run for this industry.

@VBELTandSON

5 жыл бұрын

Robert Cotrell JR kubota is my favorite small tractor and excavator! If it had a little more hp may have got a kubota skiddy.

@robertcotrelljr8573

5 жыл бұрын

V-BELT and SON just curious as I think it would be a good candidate for a guy starting out. I have a good ASV dealer near by and 2 kubota. Dealers all with in 20 minutes. The price for the kubota seem like it could trump the benifits of the ASV.

@VBELTandSON

5 жыл бұрын

Robert Cotrell JR yeah the Asv is sweet power but sweet price tag. Another reason we went Takeuchi

@MotivatedMetalworks

5 жыл бұрын

ASV's resale is shit too.

Question for ya will a mulching head mount up to a 2017 takuchi tl12r2 with manuel locking pins to hold head on

@VBELTandSON

9 ай бұрын

Yea

Big dog mulching king!!! what teeth are u using

Hey have you looked into a Fecon head? We have some Fecon here on maui and they love them. Have 3 case tv380s with Fecon heads and 1 Takeuchi Tl12V2.

@VBELTandSON

5 жыл бұрын

Kurtis Tam Sing yeah I’ve checked out fecon. Cut pretty good. But they don’t have a door on the front. Also had bad experience with our old fecon dealer

@kurtistamsing607

5 жыл бұрын

V-BELT and SON I see. Should go to the expo when they have it and talk to the Fecon guys. We have a customer that talked to them and they changed the design. There good about listening to their customers

@jdboy9

5 жыл бұрын

Kurtis how do you like the 380s? Have any secrets to keeping debris from getting inside them? I put foam where I can and a screen across the back. It helps but isn't perfect. I'm looking to get a fecon Dcr for it.

@kurtistamsing607

5 жыл бұрын

Matt J you can go to your local dealer and ask them for a debris kit. You will need to flip your cab to install. It’s all 2 way tape style foam and rubber. Also where the hydraulic hoses come out to your drive motors you can use house spray foam and spray them in that gap. Let it foam up and dry then cut remaining.

@jdboy9

5 жыл бұрын

@@kurtistamsing607 thanks a bunch ill look into it.

You did a good job mate but you could have done that job with the excavator by itself by stacking all the timber and burning it all. Ends up being better for the ground than mulch. Forestry is so expensive to buy/run/maintain. Excavator with grab isnt too bad.

@VBELTandSON

5 жыл бұрын

Noddy smith can’t burn in Cali. Fire danger is to high

i heard a bit 120 talk.....i think i was just hearing things....lo I feela 120rrrr vs talkahocho coming to content near u... Happy mul chin

@VBELTandSON

5 жыл бұрын

TipTop LandSolutions hahah threw that in there for you;) yes when we get a minute let’s battle all around best skid

@tiptoplandsolutions1421

5 жыл бұрын

Sam , u r...funny ..funny man.....see ya soonish ...Until then you and Eric have some good times working hard as u do...

@MotivatedMetalworks

5 жыл бұрын

How much fuel per hour does that thing drink mulching?

@VBELTandSON

5 жыл бұрын

MotivatedMetalworks not sure yet. Seems to be thirsty rig tho:/

@tiptoplandsolutions1421

5 жыл бұрын

@@VBELTandSON i hate thirty rigs...fuel, freekin high

Why did y’all go with the 12r2 and not the 12v2?

@VBELTandSON

5 жыл бұрын

Ray Story didn’t need the vertical lift. Plus it’s to open in the back for forestry use. Heard it would collect to much debris

2nd of 3

@mikestrucks

5 жыл бұрын

Cummins Chevy I’m the last one....🙈🐌

@VBELTandSON

5 жыл бұрын

mikestrucks bingo running late?

@mikestrucks

5 жыл бұрын

V-BELT and SON yep I’m still working... hands full of oil 😅

@cumminschevy5275

5 жыл бұрын

Me too but , needed my daily dose v belt

Can you get that mulcher wider

Hey Sam I'm searching for a tv cable bracket for my12 valve project do you have one you would part with?

@VBELTandSON

5 жыл бұрын

Dodge man a what now?

@cumminschevy5275

5 жыл бұрын

Yeah man

@dodgeman4046

5 жыл бұрын

@@VBELTandSON the bracket that holds the kickdown cable on the side of the transmission

@VBELTandSON

5 жыл бұрын

Dodge man ahh yeah I got some of those Larry’s somewhere let me look

@dodgeman4046

5 жыл бұрын

@@VBELTandSON sweet let me know we can work something out I've been searching for that

Is that a thoroughbred diesel tshirt???

Is there a reason why you mulch wood instead of cutting up and selling as fire wood?

@VBELTandSON

3 жыл бұрын

Way more wood then we could handle

@davidjennings75

3 жыл бұрын

@@VBELTandSON GOT IT. Because of you and your comprehensive videos on the TL12 I pulled the trigger and purchased one.

What do u do for a living

@VBELTandSON

5 жыл бұрын

Aj DeMoss you just watched a video on what I do

@tiptoplandsolutions1421

5 жыл бұрын

@@VBELTandSON i thought you were a cowboy this whooooole time. lo ps. enjoy your new home...

@VBELTandSON

5 жыл бұрын

TipTop LandSolutions 😂😂 thank you!

Are you the bad guy from avatar ? 😂

Hi

Getch you a sign on that new property. TRESPASSERS WILL BE MULCHED Fargo on steroids.

@VBELTandSON

5 жыл бұрын

Gerald Koth Hahahah I will make that sign! Love it! Haha

@MotivatedMetalworks

5 жыл бұрын

What trespassers??

TRY BUYING WOOD CHIPS: Your pissing away a lot of money.

@VBELTandSON

Жыл бұрын

Try selling the wood chips? Not much of a market here

That is sad, that thing losses it power fast. U must want to cry with how much u pay a month for that skid steer. Stay in the other machine

@VBELTandSON

5 жыл бұрын

William Guptill not at all worried about it. Machine does good for a skid steer just can’t run it like a big machine. Very happy with it so far

@williamguptill8096

5 жыл бұрын

@@VBELTandSON That other machine is badd ass, good job with making that video.

@VBELTandSON

5 жыл бұрын

William Guptill thank you! 🤘🏻