This kind of videos are slowly getting so rare in KZread. This is a priceless content for ford ranger owners. Thanks mate for sharing. also watched failed items at 300k, Great content again, keep it up buddy, your work is the soul of videography and content creating for KZreadrs 👍✌️ 👏👏

@samuelbolanle1994

Жыл бұрын

You can say that time and time over without being wrong

Ah man I searched a lot for a video like this. Your video is such a good step by step guide, it's insane! Thank you

Very informative, step by step clear instructions. Save me time and money without need to go mechanic work shop which many times are busy with too many vehicles to repair. Now I can DIY. Thanks brother 👍👍👍

Thank you for making this video, everybody talks about how to do it yet nobody actually has footage of it.

Hi Chris, I just want to reach out and say thank you very much for uploading this video. It's saved me from pulling my hair out trying to figure out how to get to the locations to bypass the egr cooler and block it off on the hot side as well as the cold side. You're a legend and I wish you the most success with this channel.

Excellent Chris. Very thorough and helpful.

This is such an informative video. Your narrating and camera work is great. Thanks for the information.

Awesome video !! Cheers mate !! Now I’m getting ready to tackle the motorhome .. ford inline 5 , 2016 41000 mls with a good leak but running good so no injector replacement .. so ur video is invaluable!! Thanks again

Thanks mate, you have just given me an idea to get better access to the EGR so I can put a blanking plate in it

Thanks for sharing mate! Given me a fair idea and I know what to expect when the mechs working on my car

Great work , with clear and easy steps to flow

Mate you are a legend thank you for all your videos 👍🍻

Really great content. Very very useful content for merchanics out there.

God bless brother. Great video, very thorough and done right. Well done

Great video , caught that harness in time on the front cover , 5cyl 297k

Really enjoyed watching this video thank you so much for making it 👍

Thanks 4 d info bro it was very informative. Im going to buy a used ranger so i thought it best to look for this info. Glorify👏🏿👏🏿👏🏿👏🏿👏🏿👏🏿👏🏿👏🏿👏🏿

Gracias por el video, es muy ilustrativo. Quería hacer el comentario en español para que sepas que te seguimos desde todas partes del mundo. Thank you for taking the time to explain everything in great detail. I was trying to find something in Spanish but found nothing. Thanks to my knowledge of English, I was able to find your video, which helped me a lot to repair my Ranger. Keep making videos like this. Excellent work."

Bro this is awesome. Thanks man

Just subscribed to your channel. Great video sir. Thanks for sharing your knowledge.

I rather have you fix my Car than the some of mechanics out there.. thanks for the videos mate

Excellent bro, very helpfull . Thank you

Buddy, you are the best.

It's a very good video, brother.

thanks, for share your experience service of ford ranger

Thank you for sharing this information

Ill be looking forward to see the timing chain changed❤💛💚👊🏿👊🏿👊🏿

Great video bro 😊

Really good job 👍

Excellent video

@abdautomotive

2 жыл бұрын

thanks!

Very good information

great video thanks

Thanks man

Thank you

I got to say Chris that’s cool

You have video of dipstick oil level pulled up while engine running? To see if there is smoke

Is it necessary for the wiper motor and the cover to come out in order get the last injector out?

+1 for the comment below on the leak off fittings! Did all yours just click in easily?

Great video, very helpful as I'm replacing my injectors this weekend. What did you torque the injector hold down bracket bolts to?

@abdautomotive

2 жыл бұрын

can't remember, i got the torque spec off google so not sure how accurate it was

Hey thanks for the great video 🎉 Can I get your help... I believe mazda bt 50 2.2 2013 model are the same with ford.... Here my problem... I reconeed my injectors on the 29/12/2023 and the 19/01/2024.. 1 was broken and there other 2 were blown.. After that they mixed diesel and oil I was on the speed of 140km when that happened .. If I may ask... What can be the cause of that and does it affect the diesel pump?? Your opinion will help... Thank you 🙏🙏

Any chance you can do a diesel fuel purge video? There are ones online but they are for the px2. And the ones for the px1 are all in bawhasa or tagalong.

Thank you .

Did you replace the injector clamp bolts?

Hi there, where did you purchase this kit from?

Hey mate. What are good groups/forums etc for these earlier 2.2 rangers. Also anywhere for a legit workshop manual?

do you have a vid of taking the head off, suspect my no.2 piston has burned through at only 160K

Yeah hey bro mines lost power and the transmisson light has come on and it sounds like its missing reckon it would b the injectors?

Nice work chris

@abdautomotive

2 жыл бұрын

Thanks 👍

@nathanmueller2289

2 жыл бұрын

@@abdautomotive chris just a bit of advice next time cover your number plates so no one knows then

@nathanmueller1838

2 жыл бұрын

Hello

@rogerramjuice2562

2 жыл бұрын

Excellent video

Thank bro

Hi, at the end of the video is a sound at the engine as if cklinking, what that means?

Your videos have been so helpful in no small measure. Pls I'm working on a Ford Ranger 2.2L 2015. The fault code thrown up is P062D the check light does not show even at ignition at all. But once the PCM is disconnected, the check light will show up, which i consider strange. What is your view of this ? Thank you

@abdautomotive

Жыл бұрын

i have never come across this one

Great detail mate your a legend. Mate off topic I'm wanting to reseat my injectors. I want to use a injector cutting tool just to shave the seat . I can't find anywhere the size needed for the cutting tip I would need. 2015 xlt px2 3.2 . You wouldn't know how I could find this info be any chance.

@abdautomotive

2 жыл бұрын

no, no idea, i've had to reseat mine.

Thanx for the upload well done , one question, if I start my 2.2 ranger diesel is leaking thru the tappet cover seal , what would you think could be wrong ?

@abdautomotive

Жыл бұрын

i would say the tappet cover gasket needs replacing, thats the blue one at 25:39 on the video

One suggestion let the air out of the front tires so the truck is lower and easier to work on.

Awesome videos 🎉 Btw so it's basically the copper washer that makes them leak ?

@abdautomotive

Жыл бұрын

yes

Happy Easter to you. Once again, I wish to commend you for all these educative videos. Pls, I need to ask, can the clamps used to retain the injectors, if lost and then replaced with some other metals other than its original ones lead to the p062d fault code? Because we misplaced clamps that came originally with the Ford ranger and we fabricated another that properly clamped the injectors firmly, that's all. Thank you

@abdautomotive

Жыл бұрын

what material did you use for the new clamps?

@samuelbolanle1994

Жыл бұрын

@@abdautomotive iron (angle bar) precisely. I fabricated it to fit and clamp down the injectors firmly like what was used the manufacturer. You know, I'm just imagining what could make the injectors not spray even after replacement of the ecm. The p062d remains. We've checked the ecm for any visible damage when we didn't see any, we proceeded to replace it but to no avail. Thank you for responding to my questions, I really appreciate you

Great video. Not sure if you mentioned it at the start, but were they the original injectors?

@abdautomotive

2 жыл бұрын

no, changed at 200k

Hey mate, did you replace injectors at 200,000 as a safety prevention, or were they worn? If so what was symptoms? Mines blowing black smoke, can you check with forscan if they are worn? If so what parameters should they be running at? Cheers

@abdautomotive

2 жыл бұрын

yeh, just preventative maintenance, they were still working fine could have kept them for longer. There is an injector buzz test you can do & contribution test, i might do a video

Would be great to see the egr bypass being done. Guessing you may have plates installed?

@abdautomotive

2 жыл бұрын

i'll have a video going up in the next couple of weeks that goes into that a bit, basically all thats failed up until 300k kms, the EGR cooler was one of them.

@georgebets4128

2 жыл бұрын

@@abdautomotive thanks. Would love to see the reliability of these engines that have been blanked off. I would love to get 300km out of mine

I removed mine a friend put 12v and ground on one injector for cleaning and car now has no power. What could be?

Why do U remove the fuel line to the pump? Dosent seem to be in the way.. How long a job is changing injectors all up? Never done it before, but I need to do mine. Looks pretty straight forward.. Awesome videos dude... Saving us ranger people money

@abdautomotive

2 жыл бұрын

only removed fuel line because i removed tappet cover & replaced gasket, i would allow about 2-3 hrs doing just the injectors if its ur first time.

@bobbymartin8042

2 жыл бұрын

So U don't need to bleed the injectors, just turn on ignition a few times to raise the fuel? Can U pull out injectors one day and put new ones in another day with no issues? Sorry for questions, but worked on petrol, never a diesel..

@abdautomotive

2 жыл бұрын

@@bobbymartin8042 that is correct, the low pressure pump does the priming

Hi Chris love your videos, have been a godsend for me, I have recently started using Forscan, first scan came up with all 5 injectors leaking, incident was dated Sept 22, I reset, scanned again and now it just comes up with injector 5 leaking, 2015 PX 110,000km, should I be concerned about this coming up on the scan? I see no real symptoms out of exhaust from day to day, I'm not sure if I need to go down the path of replacing injectors at only 110,000km and a considerable cost, I also add I'm running a Berrima Diesel chip, a mate has suggested this at times may just over fuel the injectors? Just after your personal opinion on this conundrum, I'm not confident enough to do as you have done in this video Cheers mate

@abdautomotive

11 ай бұрын

at 110kms i would wait till 200k to replace , i've never seen the injector leaking code but it could be chip related as i know they increase the fuel pressure at the rail

@anthonysmith9617

11 ай бұрын

@@abdautomotive Ah ok mate sounds reasuring the code is a P029D pitty I can't post the screen shot of the code info snap shot, I just read a few forum opinions of injectors possibly cooking pistons 😭

Hi great video thank you. A couple of questions if I may. If you change an injector, why wouldn't have to be programmed into the engine? Also when you said that you let it prime 5 times and then let it sit for 10 minutes. What did you mean? Did you turn the ignition on 5 times or try to start the car 5 times? Then did you let it sit with the ignition on for 10 minutes? Thank you for any response 🤗

@abdautomotive

2 жыл бұрын

thanks! if you put new injectors in, you have to program them into the PCM. The PCM must know the calibration codes for each injector in order to treat and operate the injector in the correct manner. In Regards to the Priming, i sat with the ignition on for 1 minute then off for 1 minute and repeated 5 times, hope this helps.

How old are your belts, pulleys and timing chain? Have you replaced oil or water pump yet? Are you still on the factory alternator and air con compressor?

@abdautomotive

2 жыл бұрын

everything is all factory, replaced the rubber serpentine belt & pulleys @ 200k

Hey mate when installing the washer the flat surface is facing up? And the round surface facing down ?

@abdautomotive

4 ай бұрын

correct

@louie170dx

4 ай бұрын

@@abdautomotive Ive just done it and no more smoke everytime aI start up… cheers for ur video mate its bloody brilliant!🤘

Hey Chris another way to remove the 5th injector is to just unplug wiring and remove fuel hose then you can crack the injector head take it off then u can pull it straight out without having to take your wipers and all the plastic off great big mate

For rocker cover 10nm and injector cover bracket 6nm +180degree Is this what you you torque to ? If it is. Right now it still leaks proof?. This will help alot of people including myself.

@abdautomotive

Жыл бұрын

yes

How'd u get the leak off fittings back in so easily? Mine were an absolute HF. O'Rings didnt want to slide all the way

@abdautomotive

Жыл бұрын

from memory i think i sprayed some lube on them

Hey mate outstanding video just a quick one…..so the injectors are leaking what is if any bad outcomes that could come from not repairing the leak? If that makes sense

@abdautomotive

Жыл бұрын

where are they leaking? into the cylinder?

@Stevesmate4503

Жыл бұрын

Rocker cover top area

If your ranger is idling rough after injector change what would you think . Driving is fine but idke is slightly low

@abdautomotive

7 ай бұрын

did u code them?

Sir good day, I have the same Ranger with the same engine 2.2 configuration, after the aircon was cleaned I noticed suddenly there is too much noise the cabin? we try to find the reason e.g. loose sealant etc. it but to no avail find it, do you have any idea or experience with such a thing?

@abdautomotive

2 жыл бұрын

could be the cabin filter fitted incorrectly, it is located behind the glove box

Good

After replacing injector seal and washer, the engine has low power and dtc P0299 turbo underboost. Do you know how to fix it?

@abdautomotive

5 ай бұрын

check my common fault codes causing limp mode video

Nice video. But do you have to remove the valve cover to change the injectors?

@MRShanno21

2 күн бұрын

No, but since you’re 90% of the way there it makes sense to change it

Hey bro thank you for your videos. I have some problems with my ford so many times now and it’s currently sitting at home not working. So the issue I have is the water in the tank light keeps coming up and every time it comes up I have to drain the water out. This happens every time it rains. Any ideas why that is? The last time I tried empty the water out.. I was too late to put the yellow cap back on and manage to empty the whole tank then I couldn’t turn it back on then it made loud noises then died completely then I towed the car home.

@abdautomotive

Жыл бұрын

you just need to prime the fuel system, not sure how the water is getting in there, how is your fuel tank?

@poaonove2748

Жыл бұрын

@@abdautomotive yeah fuel tank is fine I think.. injectors been sent away for checks and just waiting for the Machanics to come back to me.

Glaad to hear you also have the same ticking that i have also, Whaat is it from and how do I reduce it?

@abdautomotive

Жыл бұрын

i switched to a 5w40 oil and it seems to have gone.

Chris my ranger t6 2.2 got some problem. Some the engine won't startup when I crank and got gear symbol at my dashboard. But sometime I can crank up easily without any problem.

@abdautomotive

2 жыл бұрын

do u have access to a computer? i have a video which will show you what the gear symbol fault is

@fakhrulradzi1648

2 жыл бұрын

@@abdautomotive when I google it say manual gearbox warning. It will pop up when I crank the engine but the engine won't start. Buy if I crank the engine and the engine start up the symbol will not pop up. When I driving I don't feel nothing change either from egine power or engine noise. 1 more thing I find out when I change the intercooler pipe I found engine oil in that pipe. Ang my TB got that engine oil to

I am involved in whether the car I have is a 2014 Ford Ranger diesel. It is all defective. Every time I fix something, I get something new. Once an engine, then a turbo, then a GR. What is the solution now, an automatic gearbox that releases oil, I replaced parts, the same problem remains

@abdautomotive

Жыл бұрын

is the car imported from australia?

Good video Were do you buy ur nozzels from and at how much. Kindly share

@abdautomotive

2 жыл бұрын

i source my parts from ebay

Hi bro. Did you ever get a vehicle with a P0720 & P0722 DTCs

@abdautomotive

2 жыл бұрын

never

hi there, good video there. anyway can u give link where to buy injector for my ranger px 3.2 wildtrak 2014..got web links? thanks

@abdautomotive

2 жыл бұрын

i can only give you aussie links

@undenyme

2 жыл бұрын

@@abdautomotive sure.may i have the link?

Is it okay to replace injectors with new ones or cleaning old ones is also fine?

@abdautomotive

9 ай бұрын

depends on kms

@boykiesfarmtshosa4213

9 ай бұрын

Mine is at 144000km now...

Can new injectors be programmed with Forscan or does it need to be done at Ford?

@abdautomotive

2 жыл бұрын

yes , you can with Forscan but you need to buy the licence.

@jimnyjaye5281

2 жыл бұрын

@@abdautomotive Thanks, I will check it out

Dear Techy friend. My 2.2L Ford ranger threw p062d (injector driver circuit performance malfunction) the vehicle wouldn't start. Its problems started with adulterated diesel which led to failure of high injector pump and after replacement of the parts, there is loss of signal to the injectors. Also the Check engine light doesn't show anymore. I got another PCM and the symptoms continue. Pls what can I do, to resolve this issue, thank you

@abdautomotive

Жыл бұрын

have you tested the crank angle sensor? this triggers the injectors

@samuelbolanle1994

Жыл бұрын

Yes I've tested the CMP with scope but no wave pattern is seen

Love the Bible verse!

Hey bro can you please do a video on how to enter new injectors installed back into the system in order for it function, I've got a ford ranger 2013 and will some help from you cause the dealers cause me a lots of money please, cheers

@abdautomotive

11 ай бұрын

already done, injector coding video

Do i need to bleed out the air

@abdautomotive

9 ай бұрын

yes, priming it.

ok 🤩😍

Toyota Toyota number 1 even bush dwellers want Toyota Toyota

I'm in Ghana

@abdautomotive

2 жыл бұрын

Hi Charles

Hi

@jubileeharrison7466

Жыл бұрын

Got the same brand but having issues with my car , mechanic saying every time he cleans the fuel tank there is still water coming in again.please needs urgent advise

Thank you