Flashforge Adventurer 3 HONEST Review - This one SURPRISED me!
Ғылым және технология
See if this printer is still worth it in 2023: • Is the Flashforge Adve...
In this video, I am reviewing the Flashforge Adventurer 3 3D printer. This one SURPRISED me, so watch my review to see, what I experienced!
Check out the CURA profiles and machine settings on my website: www.crosslink.io/cura-3d-prin...
This printer was sent to me for free for review.
If you like to buy the Adventurer 3, it's currently 50USD OFF: geni.us/fJ1qnAm
English User Manual for the Adventurer 3: www.crosslink.io/downloads/pr...
German User Manual for the Adventurer 3: flashforge-germany.com/images...
THE PRINTERS I USE: kit.co/danielcrosslink/the-3d...
MY MERCH: crosslink.io/shop
BECOME A PATRON: / crosslink
CHAT ON DISCORD: / discord
BUSINESS INQUIRIES ONLY (OR IF YOU WANT TO SEND SOMETHING) - DANIEL@CROSSLINK.IO
FOLLOW ME:
INSTAGRAM - / danielcrosslink
TWITTER - / danielcrosslink
FACEBOOK - / danielcrosslink
WEBSITE: crosslink.io
The Music I use: crosslink.io/es, AMAZING for KZreadrs!
GEAR USED
kit.co/danielcrosslink/my-vid...
Disclaimer: As an Amazon Associate I earn from qualifying purchases.
Пікірлер: 228
See if this printer is still worth it in 2023: kzread.info/dash/bejne/p2iepMyMhrGodMY.html
Just a little note: Flashprint can actually use linear support structures as well, not just treelike. You simply have to change the support settings.
Nice to see the improvements in the software from 3 years ago. and they are still bringing out new updates . Brilliant support .
You are one of the better reviewers out there. I love the structure and flow of the video. No missed details. I am SUBSCRIBED!
@Crosslink3D
3 жыл бұрын
Thanks!
@carpupstream
3 жыл бұрын
@@Crosslink3D I second that input! The time flew by as Your presentation had a good flow! Cheers again!
Thanks for easing my worries! I was nervous about the printer not lasting long enough or wasting my money.
Great honest review
@Crosslink3D
4 жыл бұрын
:-D Thanks!
You are the best! I am a Russian student doing 3D printing, I needed to change the firmware on my Anet E16, none of the Russian bloggers could explain how to do it properly, I went to English-language KZread, reviewed many more popular channels than yours, but until I found you, I could not install the firmware, thank you very much.
@Crosslink3D
4 жыл бұрын
Great to hear that. I would be happy if you could share this in your circle or maybe in your country. Thanks! I am always looking for people willing to transcribe my video title and description
Great review for a newcomer to 3d printing, very helpful!
I like your point of view... you have reveal some good kind of problems the lambda customer can encounter. For me it’s essential to speak for old and most new becoming people in 3d world.
@Crosslink3D
4 жыл бұрын
Thanks for the feedback. I see it the same. The experienced users would probably not be so much interested. I will definitely stay focused on the beginners on this channel.
Really informative and thorough info especially with the Word Up about ABS material! Cheers!
100% agree. Let me add that after my initial impression, I recommended these for the library systems in Southern Utah. A dozen dozen of these across 7 public libraries with public usage and besides a little training everyone gets, there've been a ton of people who have been 3D printing and I've hardly had to touch the things. #1 recomendation.
@numan95
3 жыл бұрын
Is it actually that silent while printing, so you can read a book without getting a headache? I want a silent printer but im unsecure
@3dpprofessor
3 жыл бұрын
@@numan95 I just did a presentation to a bunch of kids all while one of these was running right next to me and was able to talk and show videos, all while the printer went to work right there next to me.
2022 and Flashforge software has regular updates . Which means they care about older customers. My first 3D printer. But love this thing. Recommend the spool adapter , so it can use 1kg spools.
Yoda needed some armpit hair grooming! 😂 Fitting considering his supposed age. I just purchased this printer on a crazy deal and awaiting its arrival. It’s going to be my first time working with one. I just searched it on YT and found your video. Thanks for the honest review! Unlike some of the other viewers I’m excited from your results and looking forward to printing with it. 😊
Z hop is in the advanced features of Flashprint mate! Great review@
@Crosslink3D
3 жыл бұрын
Indeed it is!
Looks cool thank you for share.
Im in 2nd grade and my grade is currently 3d printing keychains and we are using this printer!
Nice review Looking good How is the sound level? Thanks for sharing👍😀
@Crosslink3D
4 жыл бұрын
Not bad, it has a subtile humming when printing and the loudest are actually retract movements. Good point, I will do another round of noise level testing like I did for the Ender 3 in my longterm update.
I have this printer and it works like a charm
@929Gabby
3 жыл бұрын
Hi Amar, how do you make sure that your print sticks to the bed platform? I’m finding that my print isn’t sticking to the bed platform which results in my print moving and the it not printing correctly. Do you have this problem?
@cia9648
3 жыл бұрын
@@929Gabby all you have to do is either A rub glue on the print bed to - wash it off the print bottom when it’s done or B put blue painters tape on the bed- if this does not work do both- rub glue on tape on the bed. Now if none of these work try hairspray or lowering your nozzle closer to the bed
@929Gabby
3 жыл бұрын
Amar Makhamadaliev thank you Amar! That’s so helpful, I’m going to try all of them!
@cia9648
3 жыл бұрын
@@929Gabby no problem have a good day!
Nicely done review. I'd like to have a Grogu (baby Yoda) statue like that! 🙂
Hi. Did you tried TPU printing? Is it suitable for such flex plastics?
Nice video!
@Crosslink3D
Жыл бұрын
Thanks!
At what distance is the best to keep the nozzle from the bed? I printed yesterday an Einstein very successfully but today I tried to print an octopus and had two issues, one was that the nozzle extrude material right before the first layer and dragged it with it. And the second, was even I calibrated, happened the same thing, printed randomly and the material was moving all around. Thanks!!
Is the internal camera wireless so you can monitor the printer from another location?
Excelente vídeo.
Can I direct the nozzle to make a stronger prototype? It stops laying bead, making weak spots, printing segments, instead of continuous lay.
I'm getting my hands in this soon I've never 3d printed before but I'm quite exited
@wraggfamily7130
3 жыл бұрын
Same I am tooo
@earlymorningcoffeeat9am
3 жыл бұрын
Yeah, just got mine yesterday
@jasonpatrickries
3 жыл бұрын
How the heck do you clean the platform????
@CephaVa
3 жыл бұрын
@@jasonpatrickries idk, I ended up getting and Ender 3 pro instead, I put tape on the platform so that you can peel it off and get rid of the filament easily
@jasonpatrickries
3 жыл бұрын
@@CephaVa thanks for the tip
Which type of USB connector does the printer use? I’m asking because I am currently using my iPad Air 5th Gen to do my design work.
Do you know if this prints flexible filament like TPU?
How to position the printed object right in the middle ?
I saw there was the Option to change the Language, does anyone know what Languages are avalible ? I can't find anything about the Languages.
Can’t get mine to print nicely , it’s all stringy not adhering to the bed can’t understand why
I was recently in the market for purchasing another printer I saw this video and it fit what I needed so I bought it! But then...I recently got this machine and I was able to print 4 successful prints with 0 issues. I recently have been having major problems. 1 when I start a print it says “filament error” and stops the machine while there is nothing wrong with the filament or any type of clog as the print is coming out perfect. And 2 the printer will print smoothly for literally about half the build and then it will stop extruding. So as you can imagine I need help please!
@cooperwarrington8467
Жыл бұрын
turn of filament check
can you pause manually never used one need to know, ok next question colour change I see you did stop starting dose that weaken the mold break in two easy if dropped?
maybe we can drill a small hole where the filament roll the filament fit in that drilled hole? would be more estetic no?
The latest firmware now supports multipoint bed leveling.
Would you recommend this one for a noob who wants to keep it in the garage?
The version of Flashprint Software is Version 4, and now version 5 is out addressing a lot of the "limitations" he talks about.
Will this work good with PLA plus filament?
Hello. I want to ask what 3 d programm is best suitable for this printer. I work on sketchup 3d. Is this compatible?
I looked up this review because someone offered one of these for basicly Ender price. Guy claimed that he had upgraded to larger and that's why he was selling it. But looking at the printing results it's clear that he lied and wasn't happy with the results. My Ender 3v2 for roughly half the price makes much better prints than this stock. Thanks for the review, now I know what not to buy :-P
You can upload a new firmware over USB... you place the firmware.bin file on the USB stick and as soon as it sees it, it will update the firmware.
@williamsteele
3 жыл бұрын
I would also add that Tree Like supports are the default, but when you're adding supports, there are radio buttons at the top of the dialog that allow you to select "Linear" type supports as well. One last thing... the option for Z hop is called "Lower Build Plate While Travelling" and is under the Supports tab.
Is this a better choice than the Ender 3 Pro?
Ok but how did you create the Yoda. Did you type in something? Did you get it off the internet? A code?
great video and didnt know i could use cura with my adventurer 3 but im trying to get the cura profiles, im a patreon, but theres a error when i click unlock with patreon. i get this on my browser : {"error":"invalid_request","error_description":"Mismatching redirect URI.","state":"eyJmaW5hbF9yZWRpcmVjdF91cmkiOiJodHRwczpcL1wvd3d3LmNyb3NzbGluay5pb1wvY3VyYS0zZC1wcmludGVyLXByb2ZpbGVzLWFuZC1zZXR0aW5nc1wvIn0="} is there another way i can get the files please?
Sir, I want to ask if Flashforge Adventurer 3 is used in the air conditioning room, is it safe? or affect quality?
@Crosslink3D
3 жыл бұрын
I've printed ABS with it several times and there was barely any smell. Of course from time to time you should open a window but the chamber really keeps most inside until you open it. Anyways, it's always recommended to run the printer in a ventilated environment.
I've printed many prints from flashcloud the last week. It works fine in Norway. I don't want to use polar cloud because they want access to everything on my Google account. And I don't have Facebook.
@Crosslink3D
4 жыл бұрын
Well, maybe it got better in the meanwhile. Anyways I am making an update video with long term results in a bit so going to give it a look then
@vectraB97
4 жыл бұрын
@@Crosslink3D after I installed ip/mac address fix firmware from memorystick I think my flashcloud got more responsive. I only used stock firmware the first day. Third day I got over the air update to the software I've installed from memorystick.
@Yatukih_001
4 жыл бұрын
Thor if Monoprice really wanted their printer to be able to print these things its customers say it can print there probably would not be such hype about it.I mean think about it. Here we have a machine capable of printing just a tiny cube and thats it. And if people try to make it print something else it usually leads them nowhere.
@vectraB97
4 жыл бұрын
@@Yatukih_001 I don't know what you're talking about. 150×150×150mm is enough build volume for 99% of my prints. I can print in a drafty living room with the adventurer 3. I can even print with windows open. Also with less noise than my ender 2 with motor dampeners. My ender 2 can only print from USB connection. SD slot didn't last. I've never had to physically connect or use SD card on adventurer 3 because of internet and wifi connection. I got what I paid for with adventurer 3. Not so much with ender 2. My creality is mostly collecting dust because of missing bootloader, and no thermal run away protection.
Can the head be changed to a laser, engraver or pen?
Is this the same printer as the Monoprice Voxel?
so there is a lite ver of this printer what is the diff ???????
i use Simplify3d for slicer no issues, firmware updates atuto over wifi
Any suggestion to find a right printer for PLA material to be able to print 20 -30 mm objects as sample rings or pendants to show client before printing final wax model on different printer.
@Crosslink3D
2 жыл бұрын
Probably go for a Prusa mini
I recently purchased a Monoprice Voxel (same printer) and my only issue so far is that it occasionally freezes after calibration.
@Crosslink3D
4 жыл бұрын
Hmm, just the day before I did the final edit, I got a firmware update for the printer. Maybe it's fixed already?
You can make linear supports with flashprint aswell😁
@Crosslink3D
2 жыл бұрын
Thanks!
Just got this came in last night now I feel like I got the wrong one and feel like sending it back
nice review. a question. how big of an issue is the printbed calibration? if the corners are Lower than the middle won't you experiance frequent issues? mostt printers calibrate all corners.
@Crosslink3D
4 жыл бұрын
What I've discovered is that underneath the bed there is also a steel plate with strings. So if there is more pressure in the middle it will give a little bit. Using a brim also helped to get better adhesion in areas closer to the edges. Since the bed is only 150*150 this is probably acceptable. If the bed was 200 or larger I guess this wouldn't work anymore
@drazenlastname254
4 жыл бұрын
@@Crosslink3D haven't thought of that before. your tip ( to calibrate the point a bit lower in the middle) makes much more sence now! :) thnx!
Hi, do you have a suggestion on how I get my print to stick to the bed platform for this printer? It won’t stick to the bed which results in my print not printing correctly. Any suggestions would be helpful!
no metal and wood filements?
what kind of 3d printer would you recommend for a beginner? I've been looking for FF Adventurer 3. worth or not?
@Jens_JV
3 жыл бұрын
The Ender 3 V2 is perfect for beginners and not expensive at all, it's also my first one and now I have 3 printers
FlashForge has a new version of FlashPrint. This version has camera viewer and more things.
@Crosslink3D
2 жыл бұрын
That’s right, they improved it a lot ❤️
would you reccomend this for helmets
Does the polymer app work for this printer?
Anyone try printing with nylon carbon fiber filament for a gun receiver?
So if you were a beginner and it's your first printer would you go with ender 3 or adventurer 3? They both have their ups & downs and I'm undecided on which one to go with
@jyc1952
3 жыл бұрын
Depends . It’s like buying a car , do you want an exotic or something that can work as well depends on how much you wanna mod/tune
@christianeriksson4733
2 жыл бұрын
The Flashforge Finder!
@CN-dh3ge
Жыл бұрын
What did you end up picking?
@highroller3033
Жыл бұрын
@@CN-dh3ge I went with the ender 3. It was more user friendly in my opinion. I got it set up and running in little over an hour & a half or so. Still using it almost daily
has anyone found a solution to the knocking sounds?
Can you respool onto compatible empty spool to fit inside?
@Crosslink3D
3 жыл бұрын
There is an adapter available to use larger spools. It basically sticks into the center hole of the filament spool holder of the ADV3. www.thingiverse.com/thing:3692572 and www.thingiverse.com/thing:4002193
to prevent it from separating from bed... should we apply glue??
@shatterproof1741
4 жыл бұрын
You don’t have to it usually sticks pretty well
I would like to make simracing components. Would anyone suggest this vs the endlr 5 plus? I've narrowed down to these two models
@Crosslink3D
3 жыл бұрын
Sounds reasonable. It's big and has good print quality. I can only imagine that the CR10 max will give you more size if you need it but you can also slice your parts and glue them together. Materialwise I can recommend to use Tiamet Ultra Diamond plus material for parts that need to be strong. It's printable on any printer without enclosure and has ABS like properties: www.tiamet3d.com/product-page/ultra-diamond-pla-1kg
thanks for great input. what other fillaments will work in this printer? can I print nylon fillament with this printer?
Have you don't a review on the flashforge adventure 3 pro? I can find one from you?
Can you print Abs Filament
So I am new the 3d printing scene been doing my research & I am torn between the Flashforge Adventure 3 and the Ender 3 v2. Just a solid printer for a beginning, I do really like the enclosure the ffa3 offers for I have a cat but its not a deal breaker. Anyone got any experience or insight for me on this decision???
@chandlerfletcher4317
2 жыл бұрын
Also very helpful & insightful video for a beginner!! Thank youuuu
Hello, I have a problem when printing on the x and y axes, the size does not match, the deviation is +2, 5 mm, on a cube with an edge of 10 mm, help me fix it.
@Crosslink3D
4 жыл бұрын
I am not yet so deep into the details of calibrating this printer, sorry.
@Nightmare-ni1es
4 жыл бұрын
@@Crosslink3D It's step of Nemo17, sorry my English is very bad.
I have one
This video is deciding wether or not i buy it
@Crosslink3D
4 жыл бұрын
👍
What software should i use for 3D-Modeling so it will work perfectly? Please tell me
@AvaruusTurri
3 жыл бұрын
This is really up to you to decide. I mostly use Blender to do all my 3D models, but that is only because i have almost 10 years of experience using Blender. My friend uses 3Dmax as that is what they have used for years. Something like Solidworks will probably give you the best results as it is an industry standard for engineers and designers, but might have a steep learning curve.
@GroggyGreg
3 жыл бұрын
Freecad maybe... also sketchup which is really easy to learn, also got lots of plugins... Blender is awesome though, but as a beginner it is not easy!
@VadimRus4731
3 жыл бұрын
I selected the programs i need to use already
Will Cura 3D printing slicing software work too?
@Crosslink3D
3 жыл бұрын
Yes, you can make it work. Take the initial lines from their sample gcode files of the Adventurer 3 and put them in the start g-code of CURA
Oh ha, ein Landskollege, die FRITZ!Box hat dich verraten ;)
@Crosslink3D
3 жыл бұрын
Servus!
IF ANYONE KNOWS ANSWER TO QUESTION PLS HELP ME! How do I make it so it doesn't print a base? What I mean is it always prints something under my actual project. How do I make it stop doing that so I can save filament?
@Crosslink3D
3 жыл бұрын
That’s called a raft and you can turn it off in the slicer software!
Wondering if you still have this printer and if it kept giving adhesion problems on bigger prints. I'm thorn between going for this or an ender 3 v2 as first printer (honestly not really going to print much ABS but I need something silent as the printer will stay on m bedroom)
@rothauspils123
2 жыл бұрын
What did you end up getting?
@decomposingbrains
2 жыл бұрын
@@rothauspils123 Eryone ER-20 (it's an ender clone), been using for a week nearly any time I'm at home, except for having to buy some lubricant had 0 issues, it's an open printer so no ABS printing on it, but it has an included BL touch like device, power out prevention (tested) and basically it's mount and go.... I kept searching more, and ended getting it about a month ago (arrived about a week and half ago, so I've had so far 3 full days ,aka 12-15h prints, printing + 4 days of 4-6h ones, only 1 failed print out of those, and 1 semi failed as didn't print to size but that's my fault on cura and being careful with dimensions)
How do you find the web camera adress
cool
Mine had the hot end die within 2 days and only 2 prints and using their own filament… so disappointed
hello thanks for the review can this printer print withTPU fillament? or if not what do I need to do this with a printer like this?
@Crosslink3D
3 жыл бұрын
Well, it's a bowden printer. So Ninjaflex will give you troubles. But there is also stiffer TPU materials like the SUNLU, which might work better. I have to test this.
@wippo76
3 жыл бұрын
@@Crosslink3D ok thanks I like to print gopro mounts for drones Like you see a lot on internet They are all tpu so a little flexible for vibration absorption I have no idea with what kind of printer the do this
What about making ghost guns and yes I’m asking because it’s not illegal to make well not every state
Thank you, now I know I won't be getting this one. :) Cheaper than the others I've been looking at, but some of the problems are severe enough to justify the cost by choosing a better 3D printer.
@Crosslink3D
4 жыл бұрын
Well, since I have it I made a few more prints and it really is pretty reliable, especially with ABS. I am quite happy to have this as an alternative printer.
Not true about the supports, flashprint has an option for linear supports and has a lot of options for tweaking the supports...
@Crosslink3D
3 жыл бұрын
Yes, I figured that later :-) Sorry for that 😂
hope someone reads this , but why their social media links in their web site are not working ? makes me feel worried about the the site if it is "official"
@Crosslink3D
Жыл бұрын
Hey, what website are you referring to? Can you please be more specific about the issues that you're seeing?
@arrowsdev
Жыл бұрын
@@Crosslink3D a website found in another showcasing video, was a bit fishy looked the same as your link but with closer look found some changes , i used your link found the media links are working so i placed my order and things are looking fine now , i rushed commenting before making sure this is the same link as the link in the other video
Is this good 3d printer for my first 3d printer ?
@Neanderthal75
2 жыл бұрын
If you plan to keep adjusting things instead of printing and waste a lot of materials of failed print jobs, then yes.
Flashforge printers have been having a lot of issues lately and it almost all comes down to them cheaping out with garbage quality Chinese stepper motors for the extruder. No matter how much I clean out the nozzle, which is brand new now, with new bowden tubes and everything else, the extruder continues clicking away. Even slowing down the print and increasing temps doesn't help. It's not just the adventure 3 either. it appears they've used the same under-spec stepper motor for pretty much their whole product line.
@nicosteps715
2 жыл бұрын
Are you for real. That solves my question why my ender 3 v2 is clicking the whole f#cking day. Thanks dodnt know that
@spoolspool6278
Жыл бұрын
Just replace the stepper motor, it takes like 5 min. But it’s prob not that, it’s prob the gripping wheel.
@SurvivingWithRasta
Жыл бұрын
All motors are from China so yeah even the top line printers use “cheap Chinese parts”
@Talishar
Жыл бұрын
@@SurvivingWithRasta Not all motors come from China. They come from all over the world. You can get some made in Japan, Taiwan, Mexico and even the U.S. Many go with the Chinese motors because they're cheap.
I see people have to pay to get the settings. I wanted to try the settings for prusaslicer
How do you clean the platform??
@Crosslink3D
3 жыл бұрын
I use a scraper for larger rests of filament and isopropanol alcohol to clean up any rests of adhesion glue/spray. Depends on what material you use and if you are using additional adhesion helpers.
I have a question this 3d print can print pla material?
@Crosslink3D
4 жыл бұрын
Yes
can you use the built in cam for recording as well?
@Crazyarnold12
3 жыл бұрын
Idk but if it did.. it would probably take up space on the printer
@lmaoroflcopter
3 жыл бұрын
It runs over RTSP I believe so if you go to the printers IP in VLC you can get a live feed but... The delay is extreme.
They’re sending him a free printer and maybe will continue to send him free stuff, but he is not been bias with the review. Ok. Got it.
What a great video, I wonder what he has printe-🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿
How bad are the fumes? Can I be in the same room while it prints?
@Crosslink3D
2 жыл бұрын
This very much depends on the material you’re printing. I would suggest to ventilate the place at least multiple times a day when printing longer. Do not sleep next to a 3d printer anyways.
@endlesswaffles6504
2 жыл бұрын
@@Crosslink3D thanks!
Does it come with filaments?
@Crosslink3D
3 жыл бұрын
There was one small spool of red PLA in the box. More than the usual samples, probably around 250g
Where are you from?
how big is the build plate
@Crosslink3D
2 жыл бұрын
The build volume is 150x150x150mm
I’m sorry the only thing I need to complain about is yes, thermal expansion is real, but under 400 degrees for most material it’s less than .001 to .002 expansion so coming from someone who studied metallurgy it’s annoying to hear about in every single video on 3D printing it’s not an issue for calibration, it’s an issue with bridges, press fits , and super tight tolerances parts. But overall great video