I enjoy your humour regarding your joke that you don’t know what you are doing about fixing dent in auger when in fact your knowledge regarding repairs is extensive in a very skillful manner.

Andrew is growing up fast. It's noticeable that the little fella is getting bigger. He's a good worker too.

@christisking7778

3 күн бұрын

He's a swell lil guy.

That's pretty ingenious fixing Andy. Nice job.

You are adding body work to what has to be done on the farm 👍🚜

Andy if I didn't know better i would say that Nathan was your son. I've been watching your videos for several years and it seems like Nathan is your go to employee he's a hard worker and looks like he's a good mechanic. Good help is hard to find in this day and age. Stay safe.🍻🍻

Nice work! Just a little paintless dent repair. Sounds like the driver owes the shop fridge a case of beer.

@user-yr5ee9vm9e

3 күн бұрын

🍺🍺🍺🍺🍺🍺🍺🍺

I have been going back & watching some of your older videos & it blows my mind the capital investment in equipment required to spread on the fields the volume of manure your dairy operation produces.

Very impressive family dairy operation. The Hourigan family legacy lives on in documentation. I looked up the late Mrs. Hourigan on Find A Grave. She sure lived a long and profound life.

Hi Andy ! Good job ! Thanks Andy for your time and everybody have a good day at the farm ! 🙋‍♂️

I knew you had it fixed before you even started working on it. The funny part was! When you said that you didn't have any ideal what you was doing. You had it right from the get go!!!

Another good one Andy Y'all have a HAPPY 4th of July 🇺🇲 🚜🐄👍

Another very interesting video Thank you Andy 😊😊😊😊

Darn, Andy she's almost better then new....didn't surprise me a bit 👍👍🍻

Have a good 4th Andy if you can find time 4 it 😊😊

I've done this trick before, never fun working on augers in my opinion. For someone that doesn't "know what he's doing", you sure do know what you're doing, don't care what anyone says Andy. Great video as always, cheers :)

Maybe a good idea to weld on a couple small bolts for studs along the bottom of the auger and use them to bolt in a piece of aluminum reinforcement under the auger to help keep it from being dented again? Happy 4th Andy !

You’re pretty handy there, Mr. farmer good job

Neat little trick to pull a dent out. Expected one of those pull hammer thingies.

I usually weld a piece of chain to the tube heat it and pull it with a come a long and just leave the link welded on if it's no going to be in the way

Boy you are patient

Your giving away some of your secrets.😂

@FarmingFixingFabricating

3 күн бұрын

I know right

Great repair job guys

You finally admitted it on camera !!!!

Hawk Tuah! Spat on that thang ( tire) NATHAN!

Thank you for another Great video. Cheers

In our area a neighbor had a sicours jack . You have to pull the auger, but weld on what diameter pipe you need and go. We have half inch pipe couplet welded to it,and various laughs of pipe to run it from the end. Just a suggestion! Good luck. 😅😅😅😅😅 I

Can you store corn seed for the next year? Thanks olgoat

you can also use a mirror to see where you have to rate out now you don't have a tool with which to knock it out a stench with a weight that you can pull back and forth

Hello Andy nice repair you all have a good day.

Andrew is growing like a weed. He is gonna be a brute. Amazing what he.does at his age. Andy your.entire family.all all hard workers. You and Mom have done.great. Betting Charlie is going to be a Dr. :)

Use it up, wear it out, make it do, or do without. 🙂Thanks again for the content Andy.

At 22:40 all I had was visions of the whole bottom melting out.

Tell the young viewers how important safety glasses are when stuff under pressure sometimes pops.

@budfisher6916

Күн бұрын

Pretty late now but I expected to see you touching the outside of that dent with a few hammer taps to take out the stress??

No thought of the day from Nate? or did I miss one?

Good to see Andrew working hard. Looks like he needs a haircut

Worked. ❤

Thank you happy Fourth of July

Is the corn you feed before using the stuff in the silo yours? Just curious why you don't feed out the corn in the silo first to avoid spoilage. I suppose if you use the corn in storage you pay less storage. Love the videos!

@MorganOtt-ne1qj

3 күн бұрын

You don't find much custom storage for Hi Moisture corn. Andy has it figured out how to extend his supply of the stuff. I'm amazed at the operation.

@FarmingFixingFabricating

3 күн бұрын

It’s all good

Great Vid 👍👍👍👍🍺🍺🍺🍺

Dang Andy, you could probably get a job at a paint and body shop. 😂😂

I don't know, but I was thinking if you heated around the outside of the fent and in to the middle of it as you tighten it up it may work ??? 🤔🤔 Great video as usual

@FarmingFixingFabricating

3 күн бұрын

Heat is hard to control though

with the expansion are you buying an other feeder mix to hand the extra cows

@FarmingFixingFabricating

3 күн бұрын

No we have enough of everything

Unbelievable craftsmanship from someone who doesn't know what they're doing 😂

It's hotter than coo coo brown down here in Ky

how much time do you spend repairing things your crew breaks?

@MorganOtt-ne1qj

3 күн бұрын

Stuff happens, and his crew tries to keep the dumb stuff from happening. The auger was damaged by a contract driver. Pobodies nerfect, but his crew works to prevent damage. 😂

@janicewilliams6820

3 күн бұрын

@@MorganOtt-ne1qj sooooooo you work on the farm or just assuming?

@MorganOtt-ne1qj

3 күн бұрын

@@janicewilliams6820 I work on a farm. I have run my own dairy farm. You don't keep people around that screw stuff up, and after watching many of the FFF videos, I can say with 90% odds that the crew is not likely to do stupid stuff. The Hourigan family has hired good people, and have raised good ones that are involved in the operation. Andy specifically said it was a delivery driver that damaged the auger.

Couldn’t you cut that dent out, hammer it to shape and weld it back in?

@FarmingFixingFabricating

3 күн бұрын

Yeah you could but then you risk hitting the flighting while cutting

What is the pipe's SDR/wall thickness (not sure how that pipe is spec'd)?

@FarmingFixingFabricating

2 күн бұрын

Maybe 10 ga

@arkansas1336

2 күн бұрын

@@FarmingFixingFabricating...Thanks

2:22 You got nuts? 🤣

What ever happen to your FJDynamics dealership for tractor autosteer ?

@FarmingFixingFabricating

2 күн бұрын

I still have it…. Do you need one?i have a demo unit for sale currently

Slidehammer the next time?

@FarmingFixingFabricating

3 күн бұрын

With a magnet?

Hi Andy. Just watched 3 other KZread channels that i watch. They were in Iowa at a factory tour and Farm testing out the latest from JD. Farming with Zoe did a 2 parter. Laura farms and The millennial farmer all did one video. Ag with Emma and some construction channels covered other equipment. Good stuff coming down the pipeline. Interesting videos. Enjoyed the video .

Where do you get your high moisture corn during the cold months of the year?

@FarmingFixingFabricating

3 күн бұрын

We fed dry corn up to this point

👍

ANDY. IF you had any experience welding you'd stay away from that little wheel on your hay head. An Amber from your torch could cause a slow leak in it.

@FarmingFixingFabricating

3 күн бұрын

It’s a good thing that I ain’t doing any welding with the torches then

@thewayidoit8895

2 күн бұрын

@@FarmingFixingFabricating just pulling your leg Andy!

Guess I should have been more patient about talking about the hammer and just watched instead of talk! Sorry. Goo video again ! Thumbs up!

I am glad I wasn’t doing the straightening…. I would have heated the pipe and made a bunch of bubbles

Next time pul it and heat it from the outside in with a Torch flame

@FarmingFixingFabricating

2 күн бұрын

Would heat bend it back?

@joeykuiperij4806

2 күн бұрын

@@FarmingFixingFabricating if you heat it from the edge of the dent to the center you pull it back without anny problem sorry language barrier im from the Netherlands

Odd, I don't see any new bruises on your knuckles. Must've owed that driver a favor.

@FarmingFixingFabricating

2 күн бұрын

It happens, not a big deal

Coming from a guy that drives a Ford I agree you don't know what you are doing lol

@FarmingFixingFabricating

Күн бұрын

I have all 3

Dufus ag would have just sent one of his buddies to get some pizza and duct tape and have somebody else duct tape the auger together

@christisking7778

3 күн бұрын

😂😂😂

Happy Wednesday Andy

👍