Fixed!- Lowrance Ghost Trolling Motor Wont Lock in Place
Back story- I had my Lowrance Ghost Trolling Motor professionally installed on my Lowe Stinger 175. About 3 weeks later I was on the lake and I noticed that my 2 Hex bolts that hold my head on were both really loose and my Ghost would not lock in place in the down "deployed" position. I called a buddy of mine and he told me that he had the same problem with his Ghost. He walked me through the process I was able to fix it. Fast forward a few months and I have since helped 4 other people whom have had the same problem happen to them.
Guys here is the fix for when your Lowrance Ghost Trolling Motor won't lock in the down positions. It is pretty simple to fix and should not take you much time to do. Thank you for watching and supporting my channel.
Follow me on social media:
Facebook- / mongo_fishing-68195080...
Instagram- / mongo_fishing
Fishbrain- www.fishbrain.com/angler/nWuK...
Discounts:
WOO! Tungsten- Use code WOOfriends10 at checkout to get 10% off your first purchase
#LowranceGhost #GhostTrollingMotor #Troubleshooting
Пікірлер: 40
Thanks dude, I was on the lake for the first time with my new ghost and it wouldn’t lock. Watched your video on the lake, came home and fixed it. Thanks again
@MongoFishing
3 жыл бұрын
Thank you for the comment Billy. I am glad it helped you.
@NotoriousMastaG
Күн бұрын
@@MongoFishingthank you as well, I was in the same situation ! I used the Velcro strap to hold it down .. then fixed today after I found ur vid !
Great video. My ghost is brand new so I went out to the shop and removed the 2 head bolts one at a time and used blue loctite and re installed. Don't want that happening on the water.
Thanks bro saved my day. Not sure how but happed to me during install. Was working good then after installing the stabilizer bar let it down and wouldn't lock in place.
Hallelujah your a life saver brotha
Thanks, John. Video was perfect and I fixed the problem within 30 min. A trick I figured out, since I was solo and doing the work on my lift, was to use a heavy string loop to pull and hold the latch down while I put the head back on. Easy work!
Just purchased a ghost, it wouldn’t latch when deployed, thx so much!
Incredible lowrance manual does not mention nothing about this. Thank You for take the time sharing this valueable information!
@MongoFishing
2 жыл бұрын
You are welcome. I hope this helps.
Your advice fixed mine
@MongoFishing
8 ай бұрын
I'm glad I was able to help
Very much appreciated....I am in the process of installation and ran into this....Lowrance never even mentions this in the installation instructions. Thank you!
@MongoFishing
3 жыл бұрын
You are welcome Doug. I hope it helps.
Excellent video, nice job! FYI: I recently noticed the transducer cord on my active target had a large cylinder right above where it goes into the transducer that I wasn't seeing on other Active Target transducers in vdieos on U -tube. But I also noticed some of them had this large cylinder on the power cord for the Active Targets. Inquired via Lowrance trying to find out what these cylinders were and why some had them and some didn't. this took numerious calls and texting to say the least. As it turns out they were ferrite clamps and the following is the answer I got from one of the Lowrance techs named Randy "The ferrite clamp is not going to affect your unit. The only reason some have it and some do not is in the packaging process. Once we started packaging for international sales a clamp was included. A ferrite clamp is required for international products but not for US sales". I was told by another Lowrance tech that Randy was a supervisor. I'm still in a quandary as to why they were required for international products but not for US sales. They help to eleminate interference I'm told?
@MongoFishing
2 жыл бұрын
That is odd. I have always seen them included. I did not know that some packages did not contain one. Thank you for sharing that.
Great video John! I don't own one, but always like to see issues with anything new that comes out. I'm sure lowrance will take care of the issue on the next generation. Love my HDS sonar units from them though! Keep up the great tips and advice! 👍
Thanks for posting this! This is exactly the issue we were having.
@MongoFishing
2 жыл бұрын
Thank you for watching. I hope this helped.
Great video! My Ghost goes on tomorrow. I’m going to remove those two allen head bolts and put locktite on them to hopefully never have to fix it.
@MongoFishing
3 жыл бұрын
I added some thread locker too after this video.
Thank you. Big help.
Fixed the problem. Thanks!
@MongoFishing
21 күн бұрын
You're welcome. Good luck fishing. Sack-em up
Thanks just fixed my.
Thank you!!!
Thanks for video. That fixed mine
@MongoFishing
3 жыл бұрын
You are welcome Jeff.
Thanks!
@MongoFishing
Жыл бұрын
You're welcome
I have a 2007 Ranger 188 VS. I’m having trouble getting mount level so the motor deployes. Any suggestions?
@MongoFishing
3 жыл бұрын
Good morning Jay. Are you using the rubber spacers or no?
Do you have the same issue when is placed in the water and it won’t unlock ?
@MongoFishing
2 жыл бұрын
Yes that is most likely the same issue.
Mynext investment is a trolling motor. You like the ghost?
@MongoFishing
3 жыл бұрын
I absolutely love it.
My ghost trolling motor is hanging up about half way back when I try to stow it. It appears to be hanging up somehow with the shock absorber. Do you know how to fix that?
@MongoFishing
2 жыл бұрын
I haven't seen that. But I would look it over really good and make sure nothing is missing or off center and spray that tube shaft thing with some sort of light oil.
So today my ghost locked in the deployed position. Any fix and prevention ideas?
@MongoFishing
3 жыл бұрын
Can you see that little part that I was talking about in my video?