Hey thanks for watching!! I do appreciate all the comments helping me out! I want to make it clear that I am pretty new to FPV. I’ve only been doing it for 2 years. Take my suggestions with a grain of salt because everything I’ve come up with is based off my own research and testing. Thanks again and keep commenting as it helps me learn!

Tip from a beginning KZreadr myself, Get rid of your camera monitor. Your eyes are attracted to the screen. But you should be looking straight into the camera. Other than that. Awesome setup. Keep the grind and you'll make it. I subscribed. Nr. 196

@SanneBerkhuizen

5 күн бұрын

Oh... That comment at the end.. Digital isn't care free. Yes the avata may save itself when you have breakup. But when you fly o3. And you get breakup... You better disarm. With analog you mostly get slowly degrading signal. Most of the time you can punch out and signal will be better when you get high.

Lumenier Double AXII 2 long range antenna is my favorite!!! If you’re flying cliff sides or mountains, just make sure you stand where you can always see the drone. And do not deviate away from the path.

@Witty_FPVdrones

3 күн бұрын

Oh yeah lumenier makes unbelievable products!!

Awesome video. I just subscribed.

First, clearview was the king of reciever and the first in market with mixing ability. It is still the best and also they still upgrade there reciever. Second, you want to use 2 of the same type of antenna pointing in the same direction in mixing mode. Third, you can use a mx-air in vertical position to replace a omni, it will get you 5.8 dbi

Thanks for the info. Definitely a few things I haven't heard. Like low dbm on the goggle omni antenna. Can confirm though, I tried high dbm on my goggles and it was noticeably worse.

@Witty_FPVdrones

6 күн бұрын

Yeah. I’ve found that lower dBi with a long stem is the best way to go

@jamiekent4777

5 күн бұрын

Yeah I was about comment exactly the same, glad I found your channel as I hadn't heard a lot of the points mentioned here :)

+1 done .... thanks for the tips bro

@Witty_FPVdrones

7 күн бұрын

Of course!

some advices: foxeer wildfire reciver is sorta funky, we use mostly skyzone.

@user-pz3oj7ql1f

11 күн бұрын

but great video

@Witty_FPVdrones

11 күн бұрын

Yeah. Wouldn’t be my first choice in receiver. The TBS fusion and rapid fire are the best for fatshark honestly (btw I haven’t done much research into skyzone goggles, can you add an external receiver to them??) thanks for watching!

@user-pz3oj7ql1f

11 күн бұрын

@@Witty_FPVdrones yep, in cobra you can replace built-in, and 04 has two slots. (you can't replace reciver on 02). skyzone has quadversity mode for 04 goggles btw

@user-pz3oj7ql1f

11 күн бұрын

@@Witty_FPVdrones and ukrainian company called stingbee has some crazy quadversity vrx single module (not fatshark compatible) i think i can cover some crazy areas with it. (10 km (6.2 miles) is everyday flight for me)

@Witty_FPVdrones

11 күн бұрын

@@user-pz3oj7ql1f that’s awesome! Good to know.

Nice work Witty, you just helped me understand how to make my video reception better. Great to hear a guy still talking about analogue. New sub from me. What was the song you used on the outro please?!

@Witty_FPVdrones

13 күн бұрын

Hey! Glad I could help!! The song is “addicted” by the chainsmokers. Thanks for watching!

@ragndroneman

12 күн бұрын

@@Witty_FPVdrones thanks for your reply. Hope you have a great weekend. Im about to go find out what other tracks I have missed by the chainsmokers, and reminice in the 1's I remember. Thank you. 😀👍

Subscribe... Like... Now your a better pilot!

5:00 when you speaking about the lines here they can be also caused by not powering your fpv camera by filtered voltage from VTX but directly from FC

@Witty_FPVdrones

8 күн бұрын

Yes that’s very true! Thanks for bringing that up!

What if I have a whoop with vtx+camera combo unit with a straight antenna soldered to the unit? Im only getting a few meters of range with a rh omni and patch antenna on the goggles

@Witty_FPVdrones

9 күн бұрын

I’ve got insane range out of crappy vtx camera combos so it’s probably one of these issues: 1. You’re running too low mW on the vtx. 2. You’re on a close channel to the actual channel so it will pick up but only for a few meters Let me know if either of those suggestions fix the issue! I’ll be happy to help troubleshoot.

You forgot steadyview with the 3 mix modes

@Witty_FPVdrones

3 күн бұрын

Oh yes I didn’t even realize that receiver was a thing!

@ChrisQuadFPV

18 сағат бұрын

Yes that's what I use, its top notch 😅

So the wildfire fusion module (look at bardwells vid on it) isnt the best but for around 60 to 80 dollars theres the speedybee fusion module, it has almost the same performance as a rapidfire

@Witty_FPVdrones

2 күн бұрын

Ah yes. Speedybee is so good for the hobby with how well priced it is. Only thing I’d be concerned about is how long it would last before breaking but I’ve had nothing but good experiences with Speedybee. I think they made a bad rep for themselves with the whole randomly exploding ESC issue they had.

@parkourguy5903

2 күн бұрын

@@Witty_FPVdrones yeah and actually that esc issue is fixed. But i got it day one and theres no degredation in signal like tbs sometimes has in there vtx, and i highly recommend lookin at thw comparison on this module and a rapidfire. Its absolutly insane how close they are, hell i flew a tinywhoop (400 mw) from my couch inside my house through the backyard of the neighbor 2 houses up and still had perfect video, it makes NO sense

I liked almost all of the information and tipps given in your video. But one of them is cocompletely wrong, and i have to correct it. You dont have to softmount the VTX to get rid of those lines in your video feed. Those lines are not there because of physical vibrations in the vtx, they appear when your vtx power delivery experiences too much electric noise from the motors. A vtx is not impacted by physical vibrations, but rather electrical vibrations (if you want to call it so). You can combat this by twisting the wires connecting the vtx and fc, as well as the camera cables.

@Witty_FPVdrones

6 күн бұрын

It can be both but that is the bigger issue. I have a friend who was seeing lines and soft mounting the vtx fixed that issue.

Skyzone not recomended?

@Witty_FPVdrones

13 сағат бұрын

It is pretty good. I just have no experience with it.

Tip #6 buy a dji 03 system 😅

I have to disagree with just maxing out the amount of gain on the VTX antenna. The radiation pattern is a large toroid, and more gain will flatten it out. This is good if you need extended range and the pattern will stay very level, but as it's going to increase the size of your nulls, it can work against a quad that flips around arbitrarily. As for digital signals, they still bear the same weaknesses as analog, but do a better job of hiding their struggles. Following good practices for analog will benefit all radio systems out there, even if you don't see it happen.

@Witty_FPVdrones

19 сағат бұрын

Yes I agree with your point! Usually you’ll only find a “max” omni antenna of 2.8-3dBi made for fpv.

I fly mountains with double Omni

@Witty_FPVdrones

3 күн бұрын

Do you do one straight up and one sideways or both straight up? I’ve heard good things about dual omni so maybe I’ll try it and do a review between: patch+omni, crosshair+omni, dual patch, and dual omni. We can find out what yields the best range!

@babyzeefpv9887

3 күн бұрын

@@Witty_FPVdrones the double AXII is straight up and the tbs Omni is sideways

@Witty_FPVdrones

3 күн бұрын

@@babyzeefpv9887 that’s awesome!! Thanks!

Crosshair isn’t a patch antenna, it’s a crosshair, they are different

@Witty_FPVdrones

3 күн бұрын

My bad I misspoke. Patch antennas do a great job at picking up in the direction they face. The crosshair is similar to a patch but has better penetration and a smaller field of reception. Thanks!

In the 21st century when almost everyone switching to digital, you talk about analog… probably this is the reason why nobody is subscribing 😊

@Witty_FPVdrones

3 күн бұрын

💀💀💀 people still use analog dawg

@parkourguy5903

2 күн бұрын

Ah yes found the dji pilot🤣🤣 around 50 percent probably more are on analog still bro. Analog has better latency, audio support, is cheaper, aswell as king on 1 s whoops (please try to freestyle a hd whoop and tell me its better than a analog whoop (from a performance side)

@Witty_FPVdrones

2 күн бұрын

@@parkourguy5903 THANK YOU ❤️❤️ I’m not the only one thinking analog is still useful 😭😭😭

@Witty_FPVdrones

2 күн бұрын

@@parkourguy5903also analog is the heart and soul of all freestyle fpv. If you break an analog camera or vtx it’s only $30 to fix and if you break a dji air unit it’s gonna be $120 to $300 to fix. With freestyle where you’re bashing your drone all the time you want analog

@parkourguy5903

2 күн бұрын

@@Witty_FPVdrones fr tho. Not everything has to be some perfect picture in your goggles to have a great time, and with how far analog has come like with the phoenix 2 cam and that you just use an action cam if you want hd video, analog is KING. But hey ill gladly buy up the old fatsharks because of people selling analog (got dominator hd2s for $125)

Really Great Work man! Don't know if you might be interested in a YT video collab? (PCBWayDaisy)

@Witty_FPVdrones

7 күн бұрын

Please email my business email: wittyfpv@gmail.com

@daisywong-ke1kz

7 сағат бұрын

@@Witty_FPVdrones will do. :)