First Look Brand New Ryobi Brushless HP 1/2 Impact and 3/8 Extended Reach Ratchet! They are Awesome!
Автокөліктер мен көлік құралдары
In this video we will take a look at 2 brand new Ryobi brushless tools. The 1/2 impact has been beefed up vs the old model and has 1,170 ft/lbs of reverse torque. The 3/8 extended reach ratchet has 55 ft/lbs of torque. Both tools work awesome and have taken every nut or bolt off that I have put them on.
I took the 1/2 to work after making this video and it worked flawlessly every time I used it from axle nuts, lug nuts, tie rod ends, ball joints you name it the 1/2 asked no questions.
If you liked this video hit that subscribe button and ring the bell so you won't miss my future videos.
Don't forget to check out my Amazon store for many products and tools that I recommend. Here is the link: www.amazon.com/shop/fabautomo...
1/2 Impact
www.homedepot.com/p/RYOBI-ONE...
3/8 Ratchet
www.homedepot.com/p/RYOBI-ONE...
Пікірлер: 228
Upgraded from an older 18v kit. kzread.infoUgkxW1vOBRCMrgTCDEijzpVzDWsgI-Jm2iQv I independently chose the drill and impact tool, before I came across the kit.I like the 3 speed impact gun. It seems more powerful than my older one, and it can be set to be really gentle. The drill is more appropriately sized for my use. I used to have a hammer drill, but I did not like that it was so big and it was not a great hammer drill. I rather have a smaller drill like this, and then get a corded hammer drill for the odd case I need that.
My oldest Ryobi tool is probably nearly 20 years old, the newest a couple of months. The great thing is that the oldest tools work on my newest batteries (which are much better than the batteries of 20 years ago). That consistency is valuable to me
@FABAutomotiveDetailing
Жыл бұрын
I agree they are priced right and consistently work no problems.
@antonyortiz67
Жыл бұрын
20 años wow
@jt.8144
Жыл бұрын
Just started investing on Ryobi ONE + tools. Glad to see your comment :)
@JeffAboularage
11 ай бұрын
The old blue drills my dad has still work, all day every day. Just grab a battery and work. I’ll keep on being a customer of theirs.
@bgood213
2 ай бұрын
Do you store wrench in car with battery. How do the batteries store in extreme weather. Have you left in car in extreme weather???
Just bought the 1/2" impact wrench to use to replace the front brakes and rotors on my 2016 Ram 1500. I used the 4ah battery and had no problem removing the lug nuts and 2 21mm caliper bolts (which were rusted and very tight). To get to the caliper bolts I used an extension and universal impact joint and it didn't affect the impact wrench at all. Very impressed with the power for the price.
Been looking forward to this fab!
@FABAutomotiveDetailing
2 жыл бұрын
Awesome! Hope it helped you
FAB Automotive Detailing.. It's awesome that Ryobi sent you them tools. I get some hate because I have Ryobi tools. I love them!! I still need their new ratchet and their new 1/2 impact like you showed in this video and I also want their 3/8 impact. My son gave me a Milwaukee 1/2 and 3/8 impact so I want to compare them to the Ryobi ones. I've never had Milwaukee tools. I will be getting the Ryobi ones as soon as I can and will do a video on them for sure...
@FABAutomotiveDetailing
Жыл бұрын
It’s awesome of Ryobi to send me this stuff. I have been using their tools for years and never had a problem. I have received hate also from guys but I don’t care the tools have worked great for me.
That’s all I use is Ryobi their innovation on their tools it’s like nothing else I’ve used great tools at a great cost and I appreciate this video I’ll be upgrading soon thanks a lot Brian
@FABAutomotiveDetailing
2 жыл бұрын
Ryobi tools are great! Been a fan for a long time. Thanks for watching
Got both of these yesterday cant wait to use em🔥
@FABAutomotiveDetailing
2 жыл бұрын
Awesome!
Just bought the 1/2” impact wrench and the new HD power ratchet, and I have to agree- great performance at their price point and plenty durable for my DIY projects. The 4ah batteries have passed the good-enough test for all of my automobile diy repairs- no issues with power or longevity of charge. I know the 6 and 9 ah give added oomph, but I haven’t had the need for it.
@FABAutomotiveDetailing
2 жыл бұрын
I agree they are both great! Thanks for watching
I like that adjustment head, really comes in handy as demonstrated here.
@FABAutomotiveDetailing
2 жыл бұрын
It makes the tool very handy in certain situations where you would normally have to do it by hand
Purchased a Ryobi battery chainsaw and so far it's worked well. I own a few newer Ryobi products and they've yet to fail me.
@FABAutomotiveDetailing
2 жыл бұрын
They have never let me down either!
I accidentallly started with Ryobi when I found a grinder with two batteries and a charger for only $99 about two years ago. Since then, I have been buying more tools when I can afford it. There is a tool discount store that features mostly Ryobis at an Outlet Mall a few miles south of here and I like going there once in a while! My next tool will have to be a 3/8 wrench! Thanks!
I damaged the tendons in my hands wrenching on rusty old cars in Indiana. After having hand surgery, I’ll only work on cars now if power tools are involved. Nice review of the electric ratchet. I’ll be getting one soon to replace my Milwaukee M12.
Got to get me one of those Ryobi impact wrenches. Excellent video thanks!
@FABAutomotiveDetailing
Жыл бұрын
They are great to have. Thanks!
I’m buying both today. Thanks.
@golpherboy13
2 жыл бұрын
Got mine yesterday how you liking yours so far
Battery impacts are worth weight in gold, I have the dewalt 1/2” impact and just love it
@FABAutomotiveDetailing
2 жыл бұрын
I do like them but there still isn’t one as powerful as an air tool.
Great demo. Sold
@FABAutomotiveDetailing
2 жыл бұрын
Thanks!
Ryobi tools are GREAT quality, value and innovative tools. Battery swap ease was my initial attaction but since realize these are awesome tools, My son initially made fun of my Ryobi tools but how realizes they are awesome tool and has many Ryob tools of his own now!
@FABAutomotiveDetailing
Жыл бұрын
They are awesome tools! They have never let me down
Looks like my old ryobi 3/8 is going up for sale, I like the additional torque and the long neck on the new model. Thanks fab! 👌
@FABAutomotiveDetailing
2 жыл бұрын
You will like the new model. You are welcome
@jambajuice2408
2 жыл бұрын
Get the 1/4 smaller head. And is at 50ft lbs. plenty strong enough. Believe it or not, I have yet to max mine out. It will twist your arm off if you ain’t holding it. Best cordless ratchet on the market. Until dewalts gets here.
@Momoskimomoski
Жыл бұрын
@@jambajuice2408 Hi, do you have the name of this impact ?
I love my ryobi they have been good never had a issue l have some blue ones also.
@FABAutomotiveDetailing
2 жыл бұрын
Same here!
Great clip.
@FABAutomotiveDetailing
Жыл бұрын
Thanks!
It's not a new version. It's the high tq model. The mid tq model is a current model. They have a mid tq and a high tq impact in the line up.
Thank you!
@FABAutomotiveDetailing
2 жыл бұрын
You are welcome! Thanks for watching
Brian I just picked up the P262 new super cheap. The new version is sweet, but was more than i need. I needed a 1/2" impact and this fit the bill. As always your videos are superb.
@FABAutomotiveDetailing
3 ай бұрын
Awesome and thank you!
I use my Ryobi tools every day way back to the crappy ni-cad's and yes those batteries were junk but the tools were awesome and I still use them and I am grateful they sorted out the battery issues and every tool I owned since then has been professional quality just cant see paying twice as much for another brand with the same specs.
@FABAutomotiveDetailing
Жыл бұрын
I agree! I don’t understand why people knock these tools.
It's not old and new. The 600 ft lbs one is their mid range torque wrench and the larger one is their high torque one. That's why the size and power is so greatly different.
@wacalla26
2 жыл бұрын
Well said !!
@alwaystruth4872
Жыл бұрын
What video did you watch. One is a RACHET. They are supposed to high torque or fast. Which is the point. IT'S A RACHET.
@bobbystewart2605
Жыл бұрын
@@alwaystruth4872 it was more towards the beginning of the second 1/3 of the video right after the demo of the ratchet.
@bobbystewart2605
Жыл бұрын
1/4, my bad
@Tom--Ace
18 күн бұрын
The old mid torque was as powerful as ryobi made. Hence why the new high torque is new
Im a mecanic as well in sweden. Just a tip since u seem to also have rust belt situation. Bosh makes a great brake grease that i use for the hub and that stuff as well. Trust me the wheel never gets stuck the brakedisks never get stuck its just awsome. Thanks for the vid awsome to se some people showing that ryobi is still in the game
@FABAutomotiveDetailing
Жыл бұрын
Thank you I appreciate the info. We use Anti Seize on hubs for that reason and it works great.
The one you are calling the "old" is Mid Torque impact wrench with 600ft-lbs breakaway and 450ft-lbs fasten (model p262) and the "newer" is the High Torque Impact Wrench with 1170 Ft-Lbs breakaway Torque and 700 Ft-Lbs Fastening Torque (model PBLIW01B)
@Dieseldog2
7 ай бұрын
Yeah you got it right...the so called "old model" would also have undone all those nuts as well without breaking a sweat...I reckon big brother is good for working on big trucks etc, cause of its weight, I would find it a pain doing car repairs etc at home.I have the P262 and it is magic, never had a nut it could not undo.Very powerful.
I just ordered the impsct wrench with 3 batteries and charger all for 199.00. Great deal from Ryobi days promotion at home depot. All that is usually almost 2x what I paid. It will arrive in a few days. Neverooked so forward to rotating my tires.
@fredfields7281
Жыл бұрын
@@truetruths8090 it was for the mid level one. 600 lb ft. But works great and suits my needs. More than enough for automotive needs. Took off an axle nut like nothing.
Awesome stuff man!! I'm really liking Ryobi tools these days!!
@FABAutomotiveDetailing
2 жыл бұрын
They never disappoint! Thanks brother
I use makita for work, but for stuff around the house, I use ryobi and use a adapter to use makita batteries on ryobi tools.
Well. I know that so far I can't complain too much about my Ryobi 1/2 inch hammer drill. It's the brushed model. I had bought it cause I couldn't find battery packs ( Nicad ) for my old Makita 3/8 's drill. Anyhow, I work in the sand and gravel industry. We had an electric 1/2 inch Hitachi drill that crapped out on me. I mainly used it for installing conveyor belt splice clips. I had never intended to use my Ryobi for work but I needed something that would do the job unitil the company had gotten a replacement drill. Well needless to say. I've been using it ever since and that was over two years ago and still use it to this day. There was one occasion that I was doing patch work on a rock crusher feed belt and a co worker knocked it off and it fell from 12 feet onto concrete slab. First thing I thought knowing it wasn't a high end tool that it was a gonner, well to my surprise it's been working still to this day and the insident happened two years ago. I guess it's hit or miss with some tool brands. Maybe mine was built on a Wednesday??🤔🤔
"Yeah Thats not going anywhere" Famous last words. haha. Great Review, im gonna order the HP Extended wrench
@FABAutomotiveDetailing
Жыл бұрын
😂 Thanks!
@christsx
Жыл бұрын
@@FABAutomotiveDetailing i work as a car mechanic, have been for 12 years, and i just got the 3/8 extended wrench, absolutely love it. Thanks for the great review making me pull the trigger on it !
@FABAutomotiveDetailing
Жыл бұрын
@@christsx You are welcome!
I've seen lug nuts break off when over tightened. Trailer tire passed tow vehicle going down the road after over tightening with the big Milwaukee gun. All 5 lugs sheered right off. Not as uncommon as one would think. Loved the review I would not hesitate one second buying either of those. I have all DeWalt but just picked up the battery adaptor for Ryobi. Was going to get the $88 chain saw from home Depot but it looked just to cheaply made. Going to grab the Ryobi tire inflator instead. I wouldn't mind that ratchet at all but have not seen one at the store yet.
@FABAutomotiveDetailing
Жыл бұрын
Ryobi makes some great tools. I love the little inflator I just wish it had a lock button on the trigger so you don’t have to hold it on a really low tire. I got a heavy duty rubber band to hold the trigger down so I could set it down and let it work. Thanks for watching
1:11 that's an awesome feature. I skipped through and thought it was also an extending head. That would be amazing if it could extend out and swivel.
@FABAutomotiveDetailing
Жыл бұрын
Yeah it’s a great feature for sure!
Drilled and slotted rotors for the work van? Love it 😂
@FABAutomotiveDetailing
2 жыл бұрын
Well when you do a lot of braking in a big heavy van you don’t want the brakes getting so hot you get brake fade because you will crash. Not only that but these made a huge difference on stopping power. Before if I had to get on the brakes hard it was sketchy. Now it is less sketchy. 😂
@BenTroxell
2 жыл бұрын
@@FABAutomotiveDetailing I don't blame you at all! On topic I just scooped the 6.0 Ah, 4.0 Ah, & 2.0 Ah HP batteries + P262 for $199 at HD. Coming from only using a low end dewalt impact driver, I think i'm going to love this thing for working on my GTI and BRZ. I'll get the ratchet too eventually. Looks very handy for suspension work.
Just bought one myself
@FABAutomotiveDetailing
5 ай бұрын
I love both of these tool!
@RideForLifeCR250R
5 ай бұрын
@@FABAutomotiveDetailing I think the 1/4 extended reach ratchet will be my next purchase, perhaps the 3/8 too eventually
My blue Ryobi right hand drill you can rotate the battery direction.
I just bought the Ryobi high impact half-inch drive it works it's spectacular..... I did buy the 600-pound one and it would not break my lug nuts on my 2005 Jeep Grand Cherokee... I paid $199 for it and I got the 4-Hour amp battery with the charger for $108 best money I ever spent... I wanted Milwaukee the Ryobi does just get a job and it's cheaper than the Milwaukee with a battery and charger....
@FABAutomotiveDetailing
2 жыл бұрын
It is a beast for sure! Thanks for watching
I'm a Ryobi fan boy but I'm ready for a new slimmer battery design. I know they say they never change their batteries and most love that but the technology has changed so much. They can easily make a battery that just goes into the handle now.
@FABAutomotiveDetailing
2 жыл бұрын
They definitely could do that! I’m sure they eventually will change it up.
@bubbalo3388
2 жыл бұрын
Yeah but Ryobi is all about one battery for all tools which is more convenient and cost effective, also with this setup you have the option of using different sized capacity batteries suited for your needs. Yes a big block at the end can get in the way sometimes in the instance of certain projects but not usually. With a stick battery that fits in a handle you do not have the flexibility of added power options across all your tools or to be able to power them all. You obviously aren't going to be able to run your weed whacker with a small stick battery. Also with a battery that fits in the handle you are limited on the ergonomic design of the handle.
@jalee6587
Жыл бұрын
I hope they never change the battery . You must have like 2 Ryobi tools. If you have dozens of Ryobi tools you would understand why the battery should never change. Who cares if they can save an inch on the battery it's not worth losing 4000 dollars worth of tools by changing the battery design to save an inch.
@jalee6587
Жыл бұрын
Plus if you have a full set of older blue Ryobi tools the newest ryobi batteries will still work for those 20 year old tools. I hope they keep the same battery design for another 20 years.
@MrTaylorfenoglio
Жыл бұрын
@@jalee6587 I have a very large collection of Ryobi as I am somewhat of a Ryobi fan freak. With that said there is a point we are coming to quickly where there would be no reason to have Ryobi anymore as the technology changes and they become obsolete. In the past and even now there hasn't been much discovery in battery technology so Ryobi hasn't had to change anything. Now with new discovery and research the future looks different. Same happened with vacuum tube TV's. For many many years tv didn't change much then plasma, lcd, led and now OLED happened. This would be like Ryobi staying with tube TV's in the future. It's not here now but will be quick
I just got both of these for the price of one. came with battery and charger for only $100! it was a buy one get one free from home depot
@FABAutomotiveDetailing
Жыл бұрын
That’s an awesome deal!
First from 🇨🇦
oh wow, thank you for this video. i didn't know that was a A for Automatic.. i thought it was a 4. i need to wear my glasses fr. i totally thought it was dead because it wouldn't tighten my carriage bolts back in. it would just clack one time, and stop. it definitely[ broke the dreaded honda cranskshaft bolt loose in 2 seconds tho
@FABAutomotiveDetailing
6 ай бұрын
You are welcome! The automatic works great if you don’t want the nut real tight so you can torque to spec
I don't use Roby tools , spelled correctly... After watching this video... I will Buy Ryobi tools! Great video!!!
@FABAutomotiveDetailing
5 ай бұрын
Ryobi makes great tools!
For this video my only wish is you include their model number. My Ryobi is the P261, so I wondered which version you were using.
I wonder how this high torque performs with the standard 4AH batteries. I have a bunch of them and it would be great if it will do 400-500 lbs tightening and 600-700 lbs removing nuts with the older batteries.
I have Dewalt 18v XRP tools and debated on replacing them with a 20v system but decided it was more feasible to just get the 20v adapter than replacing all my 18v tools. If there was a tool that Dewalt did not offer and I had to get it from another maker then a Ryobi would be one of my first choices because of the battery system and the wide assortment of tools they have available using the same battery system and the cost. Sure some other manufacturers may have a better performing tool maybe but the Ryobi is more affordable and will likely still get the job done also.
@FABAutomotiveDetailing
2 жыл бұрын
Ryobi gets bashed a lot but they have never let me down and I use them all the time. The wide range of products that take the same battery is what makes Ryobi tools so good in my opinion. Plus they are priced very reasonable. Thanks for watching
@johnmiller7682
2 жыл бұрын
The 18v and the 20v Dewalt are exactly the same. The 20v is just a marketing gimmick.
@bubbalo3388
2 жыл бұрын
@@johnmiller7682 the 18v are NiCD and the 20v are li-ion. The NiCD batteries may have better shelf life and more charging cycles but they also suffer from drain from sitting and memory effect and should be drained before recharging and thus requiring some maintenance for people who don't use them on a regular basis like a contractor other wise they will fail quicker. The Li-ion batteries do not have the issues I mentioned thus will probably better for people who use them occasionally. Although they have less charge cycles. The size and weight difference makes a difference also.
I just got this same set
@FABAutomotiveDetailing
2 жыл бұрын
They are nice tools
Smurf checking in! 4th😂
I'm a newbie into diy. I have a Miata and I have all kinds of stuck bolts on it. The cranckshaft one was the hardest to undo, but I now have an M6 bolt stuck in the block holding the thermostat housing. Would this type of wrench work for that bolt or would it just break it to pieces?
I am buying ther brushless extended hp ratchet. I have 1/2" crasfts man impact but i am curious if the 3/8" impact is the same as the 1/2" like alot or companies do wi5h their mid torq impacts
what Torque Wrench are you using? Can you please send a link where I can buy a good one?
Wheel stud yield strength?
I just started buying Ryobi tools (senior here so need all the help I can get) but I do need an impact wrench. What is the model number for the Heavy duty impact wrench? Glad I tuned into your video.
@FABAutomotiveDetailing
2 жыл бұрын
There is a link in the video description to it. I’m not home to look right now.
its not new and old. they are 2 different impact wrenches. the smaller one is the mid torque and the larger one is the high torque.
Impressive tool. Overtorquing can break bolts. You come off the highway and heat up the brakes and hub and POP... There goes your overtorqued lugs. Look on the ground at traffic lights at the end of exit ramps. Extensions do not effect torque value on torque wrenches.
@FABAutomotiveDetailing
7 ай бұрын
On a passenger car or truck I always torque to spec but these bigger lug nuts and big studs we don’t worry about it. Extensions will absolutely change your torque value. There is a reason when torquing head bolts the manufacturers state to not use extensions. They twist and flex which will definitely change your torque values.
Will the 1/2" be able to remove Crankshaft Bolt using regular impact socket? You do know that most 1/2" can remove wheel lugs & brake jobs.
@FABAutomotiveDetailing
Жыл бұрын
Never tried it on a crank bolt as o never used it at my job these are my home tools. I would say if it is a factory tight Honda crank bolt then probably not. Usually need a 3/4 impact for those unless they have been off before. Keyword is “most”!
I'm thinking of buying this impact. I have the old one which works great and didn't see any reason to upgrade to the first brushless one but this one might just be worth it. I do like the automatic features on both but the one I have is only like 300fp so does not really need it on that one. I work on my own vehicles but other then that really don't have much of a need for it other then I like it a lot lol. I may need it one day but haven't yet. The only thing I use mine for is taking wheels off and sometimes brake caliper bolts but their usually not very difficult on smaller vehicles. Maybe a occasional strut bolt or something like that. I love ryobi and have been using for a very long time. So long I have the original in working condition very first lithium ion tools. I still have a couple nickel cadmium tools I don't use. I first purchased ryobi ni-cad when my Dewalt got stolen and I needed a drill asap so I bought ryobi and I loved it and I've stuck with them every since. The only brushless I have is the one handed Sawzall which is awesome and the hammer drill which is also awesome. I believe the skillsaw is also brushless but can't remember. Yes I know Sawzall and skillsaw is a brand name belonging to Milwaukee & skill but everyone calls it that just like channel locks which is the only brand pliers I use lol. I do use Milwaukee, Makita, and Dewalt power tools but all my battery tools 100% ryobi. A lot of the reason is because I have so many and a ton of batteries already but also because they have never let me down and the price is right. I use them on the job and I don't care when anyone thinks lol. Milwaukee makes ryobi anyway lol.
@johnhebberd2248
2 жыл бұрын
Get it now...it's a hundred bucks if you buy 4 tools...still a hundred bucks if you cancel the other three ;) but I'd keep the batteries...2x 4ah hps for 100 more. Check out the buy more save more event a home depot
@my2centz196
2 жыл бұрын
@@johnhebberd2248 I have a ton of batteries but I do wanna try the 9ah batteries. I just purchased a couple battery deals. One you may like. 2 regular 4ah and 2 hp 4ah batteries for $160 I believe. Anyway $100 I'm definitely on it lol. I'll have to check out the deal they have Thanks.
@golpherboy13
2 жыл бұрын
Just got both the impact wrench high torque and the new extended ratchet yesterday. they are both solid cant wait to use them!
Does the battery work with the other tools ?? Or did you have to buy more batteries for the other tools
@FABAutomotiveDetailing
Жыл бұрын
It works with all of the other tools
So which impact should i go for? Brushless is at 156 right now tool only and mid impact brushed is 99 with 4oh battery and charger?
@FABAutomotiveDetailing
4 ай бұрын
Ruthless is the way to go in the long run plus it has more power
1st Let's do it!
@FABAutomotiveDetailing
2 жыл бұрын
🏆
Was that #1 setting or #3 setting that torqued it to above 140 ft/ lbs ? I'm trying to figure out what torque specs are per setting 1,2 & 3 so i dont over torque on a regular vehicle
@FABAutomotiveDetailing
4 ай бұрын
Honestly at this point I don’t remember what settings I had it on. Most likely it was on 3 though.
Great video been using these tools for around 9 years with no issues until last week, have you got a product number from the new most up to date 1/2 impact please looks a beast
@FABAutomotiveDetailing
2 жыл бұрын
There is a link to the newest version i used in this video in the video description.
@DeanGriffiths12
2 жыл бұрын
@@FABAutomotiveDetailing I’m from England & could do with one from over here if I can, thanks anyway 👍🏻
@DeanGriffiths12
2 жыл бұрын
Ps I can’t use the link in your description it won’t allow me to open it 🤷♂️
@Chis-xg1se
2 жыл бұрын
Hi the high impact wrench is: # PBLIW01, enjoy.
Why would anyone EVER purposely over tighten a torque specified fastener? You could have just as easily used AUTO, then torqued them with your calibrated wrench.
@FABAutomotiveDetailing
2 жыл бұрын
If you are taking about the hub bolts then there is no reason to worry about torquing them because you aren’t going to break that big of a bolt with an impact but it will be tight enough to not come loose.
@jeffbucknam7393
2 жыл бұрын
I was always taught not to tighten Lug nuts down with an impact wrench or you will never get the tire off on the road if you have a flat
@FABAutomotiveDetailing
2 жыл бұрын
@@jeffbucknam7393 When it comes to cars, SUV’s and regular trucks I use an impact on low then torque the rest of the way. Did it for 20 years no problems. On heavy duty equipment I was taught to just tighten them down with the impact. Whether that was right or wrong I don’t know but I never had any issues with lug nuts coming loose. Also if I get a flat on the van I’m getting it towed I wouldn’t trust a little scissor jack with all that weight in it.
I got mad at Ryobi a few years back and I also got mad at Home Depot for their policy. This was before Ryobi went to the thicker battery and better battery charger. I have 3 Ryobi tools and 2 older battery chargers and I had 4 Ryobi batteries(old Style). I would alternate the batteries on the chargers, but they still went dead on me. They weren't even a year old. I went to Home Depot where I bought the tools and batteries and chargers. They could only give me a slip of green paper with Ryobi's phone # for battery issues. I called, they wanted the serial numbers off each battery and the serial # off of each charger. What a hassle and they told me that those batteries were no longer under warranty since they had replaced them with the thicker battery. I was mad at Ryobi for not making it right and I was mad at Home Depot for not standing behind a product that they were selling. Any way I needed to weed eat and I thought I would give the new battery and charger a try. The new battery and charger have held up good. I might invest in a couple more batteries and another charger and this impact wrench while I'm at it. Glad they changed battery models
What is the difference between the new impact gun and the old impact gun
@weekendwrench
2 жыл бұрын
About 770lbs of extra torque
Why not make skinny battery like Milwaukee tools? I have the long reach 3\8 and it's better.
Why can’t I find this and other tools I see on you tube at Home Depot?
@FABAutomotiveDetailing
2 жыл бұрын
I’m not sure. There are links to both in the video description if that helps
how much torque do you lose with extensions and wobblers? guesstimation?
@FABAutomotiveDetailing
Жыл бұрын
A few ft lbs which isn’t crucial on jobs like this one. I only worry about it on crucial jobs like head bolts.
Don't you own impact rated universal adapters for odd angles?
@FABAutomotiveDetailing
Жыл бұрын
Yes but the majority of my tools were at my work. My tools I have at home aren’t as nice as my work tools are because I don’t want to buy the same tools twice if that makes sense.
Ryobi never quits unless you just tear them up deliberately and the battery PLUS ONE system
@FABAutomotiveDetailing
Жыл бұрын
I agree 💯! Ryobi products have served me well over the last 10 years.
Umm silly question , how do know how much torque certain bolts require ?
@FABAutomotiveDetailing
Жыл бұрын
You can find it in the vehicle repair manual. We have software as mechanics that we use.
@danieltucker632
Жыл бұрын
@@FABAutomotiveDetailing thank you lol
the impact guns are different one is a mid torque gun one is high torque both are new model
Is this model: PBLIW01B-PBP004? I see another model as well the P262-PBP004.
@matty_w
Жыл бұрын
The PBLIW01B is the bigger (high-torque) one. The P262 is the smaller (mid-torque) impact wrench in the video (and I'm not talking about the cordless RATCHETS in the beginning). The PBP004 refers to the 4Ah battery that is bundled together with those impact wrenches at places like Home Depot.
did he say they are supposed to be at 140? Doesn't that ryobi highest setting do 450 haha, and can back out 600. Its on there three times tighter?
What’s the 1/2” h/p tool #? Thanks
@FABAutomotiveDetailing
2 жыл бұрын
Link to the tool is in the video description
Those are 2 different guns.. 1 is mid size the other is full size great
@FABAutomotiveDetailing
2 жыл бұрын
Exactly that’s why I showed both in the video.
🤜🤛✌️
What is the smaller ryobi one model number?
@FABAutomotiveDetailing
2 жыл бұрын
I have no way to look at it right now so I’m not sure but there is a link to it in the video description.
@lthegr81
2 жыл бұрын
@@FABAutomotiveDetailing I found it. Thanks
I need someone to show me how to release the battery from the tool or charger.
@FABAutomotiveDetailing
2 жыл бұрын
Just squeeze the tabs on the side of the battery and pull
@Live-life..
2 жыл бұрын
Lol this is not hard 😂
@delightfuldarlingdeb
2 жыл бұрын
@@Live-life.. You certainly aren't helpful or useful in any way. Serious arthritis in my hands. My daughter was finally able to get it off.
"thats not going anywhere".... that is probably the most universal saying amongst us tool users
@FABAutomotiveDetailing
Жыл бұрын
Yes it is! 😂
You dont use 360 degree impact adapter to remove brake caliper bolts?
@FABAutomotiveDetailing
Жыл бұрын
What do you consider a 360 degree impact adaptor? Swivel?
@HeadsUP253
Жыл бұрын
Yes 360 degree swivel impact adapter :) it works even great with 3” impact extension
@FABAutomotiveDetailing
Жыл бұрын
@@HeadsUP253 in a tight spot I will use a swivel but if I don’t need to I won’t because a swivel actually reduced the power of the impact.
@HeadsUP253
Жыл бұрын
So how do you remove that brake caliper bolt that one u couldn’t reach in this video when using a impact wrench? Curious
@FABAutomotiveDetailing
Жыл бұрын
@@HeadsUP253 I used a ratcheting wrench and a regular wrench for leverage to break it free then used the ratcheting wrench to remove the rest of the way.
Akterful amar lagev
I love Ryobi tools myself. Well worth ethe price. But they did drop the ball on the little handheld vacuum. worthless
I believe the 18 volt battery tools are RATCHET, not Impact.
@FABAutomotiveDetailing
2 жыл бұрын
I said Impact on accident. The 3/8 in this video is a ratchet and the 1/2 is an impact. They aren’t both RATCHETS
"With the Loctite on there, there's really no reason to use the torque wrench..." --Are you f'ing kidding me?!
Impact wrench ... *Holds a Ratchet*
At 0:40 - um, that's NOT an impact.
@FABAutomotiveDetailing
2 жыл бұрын
Yeah it’s a ratchet I had impact on my brain!
Idk y this is bugging me by that’s a ratchet not an impact wrench 0:39
@FABAutomotiveDetailing
4 ай бұрын
Yes I misspoke. It’s not easy talking to a camera sometimes. 😂
@bobbystewart2605
4 ай бұрын
@@FABAutomotiveDetailing lol, I’m the same way. Idk why it bugs me tho.
You aren't gonna get any power out of those impacts without a HP battery
@beaugibson2951
2 жыл бұрын
You get plenty of power without a hp battery, I've used a 1.5ah with the high torque to take off tractor tires and truck tires only time I needed an hp battery was for the yolk nut changing a pinion seal on a Dana 80
@antcantcook960
Жыл бұрын
Someone doesn’t know how HP batteries work…
Ree o bee
@FABAutomotiveDetailing
2 жыл бұрын
Yeah I always say it wrong. 😂
That's not a impact wrench that's a wrench 🔧 it doesn't impact the impact wrench is the p262...... If you had the Milwaukee you wouldn't have to adjust the head 😂
Aren’t they called ratchets?
@FABAutomotiveDetailing
2 жыл бұрын
Yes I misspoke in the video. It happens when talking to a camera trust me. 😂
1:35 in and I call BS your old tools look unused.
@FABAutomotiveDetailing
Жыл бұрын
That’s because they are my tools I have at home for small jobs. I don’t use them at work.
@thepubliceye
Жыл бұрын
@@FABAutomotiveDetailing Sorry I doubted you but when you hold up a tool and claim you use it a lot, I think it should look like it.
@FABAutomotiveDetailing
Жыл бұрын
@@thepubliceye No biggie I get it. When doing small jobs around the house the tools don’t get very dirty.
@thepubliceye
Жыл бұрын
I should now complain, there is just so many fake endorsements for everything nowadays. I think it best just to watch what others use at work.
Rachets always have low torque no matter what
Dont waste on Ryobi. Spend few more bucks and get Milwaukee, Dewalt, Ridgid, Flex, and others.
@FABAutomotiveDetailing
2 жыл бұрын
I disagree completely! I have had Ryobi tools for years and never had a single issue with them. I have a friend that uses them on job sites everyday and swears by them. Brand name doesn’t necessarily make a tool better or worse.
@wt9653
2 жыл бұрын
@@FABAutomotiveDetailing Well, I go through many reviews before making my purchase. There are few honest reviews on KZread. Project farm is the most honest and scientific review there is. His reviews never promotes Ryobi. His recommendations are always Milwaukee, Dewalt, Flex. His bargain recommendations are not even Ryobi.
@FABAutomotiveDetailing
2 жыл бұрын
@@wt9653 I also watch Project Farm. Just because he doesn’t mention them doesn’t mean they are bad. A lot of people won’t give them even a shot so they of course wouldn’t recommend them. They are very underrated tools.
@wt9653
2 жыл бұрын
@@FABAutomotiveDetailing You said it. Ryobi are underrated and always will stay that way. I'll pay extra 30-50 and buy the next better tool. Don't get me wrong. I do buy Ryobi lights, fans, inflator, etc. Just not their power tools or 40v-80v OPE. Ego, Green works, Dewalt, Stihl, Husqvarna, and Echo makes much better OPE.
@RenegadesGarage
Жыл бұрын
W T.. Ryobi, Milwaukee, Hart and several others are all owned and made by TTI - Techtronic Industries..
That rust is nothing lol
You lost me when you called a ratchet an impact wrench. I can't trust anything you tell me now.
@FABAutomotiveDetailing
Жыл бұрын
It was obviously a slip up! Try talking to a camera and don’t mess up one time. It’s harder then you think.
@FABAutomotiveDetailing
Жыл бұрын
18:16 I call it a ratchet!
@jacobgreen6939
Жыл бұрын
I wouldn't trust anybody then cuz everybody slips up once in awhile.
@slipperyjohnson7016
Жыл бұрын
@@jacobgreen6939 Dude I was just messing with ya, relax lol
I'm not sure what Ryobi is trying to target being they are a home owner grade tools. I can't see needing that huge torque numbers for a home owner. I like some of the Ryobi tools and think they are perfect even for an avid wood worker.
@FABAutomotiveDetailing
Жыл бұрын
They are trying to target the DIY mechanic. I know a lot of construction workers that use Ryobi tools.
@jasonhull2163
Жыл бұрын
@@FABAutomotiveDetailingthey are ok for home use. If a man showed up with cheap tools he's not building anything with my name on it
@jasonhull2163
Жыл бұрын
@@FABAutomotiveDetailing wasn't meant offensively. My dad just drilled in my head always go to a job site looking knowledgeable. I almost bought a ryobi impact wrench for home but I'm debating cause I'm on makita lineup
@FABAutomotiveDetailing
Жыл бұрын
@@jasonhull2163 Wasn’t offended at all. I have a buddy that does some of the best work in Indiana that uses only Ryobi tools. He used to use DeWalt and Milwaukee and got tired of having problems. In the last 5 years since he completely switched he has yet to have a tool fail him. Most people that hire a contractor to do work wouldn’t know a Ryobi from a DeWalt, Makita or Milwaukee all they care about is if you do good work.
@jasonhull2163
Жыл бұрын
@@FABAutomotiveDetailing that's why I use makita
Cordless ratchet is different from a impact wrench, you're crossing tools
@FABAutomotiveDetailing
3 ай бұрын
Try talking to a camera and not mess up it isn’t easy. 😂 I had impact on the brain I know the difference.
Now im gonna buy the impact and 9 ah battery. But my wallet aint gonna like that
@FABAutomotiveDetailing
Жыл бұрын
No the wallet won’t but it’s worth it if you have used for it
@melvinthemechanic
Жыл бұрын
@@FABAutomotiveDetailing ey found a cheap 3/4 milwaukee impact for cheap Yayyy im buyin that instead