Wow Barry as soon as you get the rest of the parts on you can PAINT 😂

I can tell you have alot of personal satisfaction of a job well done and why not? You sir are one of the best of the best. Congratulations on a job well done thusfar. Good to see your moving around like a healthy 45 year old should. Stay safe.

@stevesmoneypit6137

5 ай бұрын

45 😂

Barry, take a vacation and come to idaho and help me with the wife's gt/cs quarters haha. Love the work you do. You are truly a craftsman.

Barry, you just don't know, or maybe you really do, just how much your details and your measurements mean to people who are watching this. I am in the middle of a full dynacorn floor pan assembly installation on my 69 fastback and my stress level is high but gaining confidence as I watch your slither project progress and I will reference your videos down the line as I get to my panel replacements. My issue is not so much the rust because I've owned my car for 35 years and that's already been taken care of but I did pro street it 20 years ago and pretty much gutted my car from the front floor supports all the way back to the tail light panel and now reversing all that to go back to stock. And parts, yes! Parts laying around. It sure is nice to throw empty parts boxes away. Thank you so much for these videos brother! 👍

Sure do love the 69 mach1 my brother Bobby died in 2001 he had a 69 with the 428 Super Cobra Jet it was one of the fastest cars around our town back then

Just wait till you get your weather seals on the trunk and around the doors, everything may change on you. It happens to the best of us. There are frame measurements for "loaded and unloaded" engine in and on the ground to unloaded with engine out, but, I am sure you already figured those in to your build.

Watching your video on Friday afternoon motivates me to work on my wife's 1965 Mustang on Saturday morning. Thank you for all of the detail work you are putting into Slither.

Great video Barry! You really take the time to show how critical it is to make sure fitment is good or at times close enough, lets face it, the stampings no matter how good may still not fit perfectly and that will drive modifications to be done. Thanks for all you do!

I watch a lot of automotive mechanical and body work content on KZread. This man is a meticulous craftsman !

New to your channel and catching up between making content for my channel. Love your work and glad to see your back working. -Spanky

Before you know it you are going to be done this one. Looking really good!

Wow Barry, you look refreshed and happy in your work. The video and audio is super, nice editing of both. Things have stepped up a notch.

Great to see you making progress and getting the panels done and back at it again looking forward for your next videos thumbs up 👍👍👍👍👍

Barry, that car will be better than the factory could ever have done. C-ya Mon nite, T/B. 😊

I bought a used HF pinch welder off FB and used it on my tail panel on my chevelle and a windshield channel on a 59 Apache. Worked great but yes,it is heavy. As for the cord. I already had an extension i made for my welder. If you do alot of body work like you do it could be a time saver.

The 3/4 rear view of a fastback Mustang is one of the most beautiful sights in the world. I have a 2020 GT and every time I look at it I see where those lines come from. You’ve really done a nice job on this one.

hi barry looking very good .👍👍👍👍👍👍😄😄

That must have been pretty satisfying getting all that welded in solid! Great job! I don't envy all the welds you needed to grind down! LOL

Looking good!

Open with a recording of Reba singing the national anthem and your videos will be better than the Super Bowl to watch. Tom

Nice work as always Barry!!! 👍👍👍

dang man!!!! love watching it all come together!

Congrats on getting more parts on. Great job.

Coming together soooo nice

Looking really great fine work you have done

Very good .

Looking terrific!!

Way to go, looking nice!!!

Good job people don't understand cars are built by numbers not the old that looks good to me just weld it . Worked in prototype and race car stuff, check and Double check

Another great video Barry looking good👍👍

@greggsassaman8419

5 ай бұрын

What

see why you were looking at spotwelders

WooHoo 3rd like. First comment. Let me show you something - Fire Marshal Bill.

@JoDaddysGarage

5 ай бұрын

😂

@charlesfish5619

5 ай бұрын

I use a small 110 volt spot welder from Harbor Freight. Works good, looks factory and no grinding welds..

I've enjoyed this alot. Just curious if you are going to get back onto the Camaro next?

@JoDaddysGarage

5 ай бұрын

That is the current plan.

@punkinsgarageandpaint8299

5 ай бұрын

@@JoDaddysGarage also maybe Dynacorn will work with you on your Mustang build.

Nice welding. Are you going to bronze braze the roof to sail panel seams?

@JoDaddysGarage

5 ай бұрын

No. I may weld some n an overlap piece. Still deciding.

Side marker holes are precut or you cut them i need to cut some

@JoDaddysGarage

5 ай бұрын

Precut

What kind of spot welder would you buy?

@JoDaddysGarage

5 ай бұрын

I have looked at harbor Freight. That’s about it.

Are you going back with Lead for the roof seam?

@JoDaddysGarage

5 ай бұрын

No plan for that.

@jeffrob073

5 ай бұрын

@@JoDaddysGarage that’s exactly what I did for my 1968 Cougar.