Fifth Wheel Hitch Installation.
Автокөліктер мен көлік құралдары
How I installed the rails to use a 5th wheel or gooseneck hitch in my 1994 Chevy K2500.
A rail kit from Amazon was used. amzn.to/3ucOzXM
You can also just buy the brackets and bolts if your hitch came with the rails. amzn.to/3f6jiBw
Пікірлер: 124
I know this is an old video - BUT - You, Sir, are an inspiration to some of us who need it!!
Magnet to hold the bracket up on the bolt? Absolute genius. And putting a weight on top of the bolt heads to hold them down for you while you get under the truck... Making work easier for yourself at every turn. Great vid
You sir are an example of how a great step by step video should be done. No annoying music and inserts that not relevant. I am buying this install kit and will do this myself. Thank you.
My friend had a stroke and now recovering and I am installing one for him so he can go camping. Thank you so much for doing this video and helping me to help him. This was great.
Thanks for your time and effort I will be installing my 5th wheel today. You made it look very doable. Well done.
Super-helpful, thanks for putting this together and sharing! I hadn’t thought of welding the brackets- that’s totally how I’m going to do it now. Happy trails, cowboy!
Great video looks good and well instructed. One recommendation I would make is to place it a little in front of the rear axle so it displaces weight not only on the rear axle but also more more on the front of the truck too. Typically when you install a goose neck or 5th wheel hitch on a truck you don't want the weight directly centered over the rear axle you want it just forward of the rear axle toward the cab. This provides a better balanced towing experience and helps prevent the front end of the truck from being lighter or lifting when hauling a heavy load because it places some of the load on the front of the truck as well.
Phenomenal video well done!!! great presentation, well-illustrated and for you to have done it with just your left-hand SIR MY HAT IS OFF TO YOU!!!! There are people out here that have full mobility and 3 people helping that can't do what you just did and, in most cases today they just flat out WON'T DO IT!!!! We all know that you're not on here looking for sympathy comments and we don't want to disrespect you by making you feel that way, but we all want to show our appreciation. THANK YOU FROM ALL OF US THAT VIEWED THIS VIDEO 💯🙏!!!! and I'm taking it upon myself to speak for everyone....
Excellent video! I installed the same rails in my 2004 Silverado yesterday, and I'm so glad I watched your video first. Thank you very much!
Just reiterating what everyone else has been saying. You have provided excellent instructions. Better than all these hitch companies have provided. They owe you money in my opinion.
Great video! You made a technical installation look very easy and straightforward. Now I’ll have to do mine now. Thanks for taking the time to do the video.
@timlapham2583
2 жыл бұрын
Me to,..... Now I want to do mine my self because no one wants to install it. This is what I have to do to my 2009 Chv. truck with my 2 hand hitch. 2 thumps up. It was a very good video.
Hi man I know how hard is doing something just one hand,after cancer I have paralysed right side of my body ,every day I fight with my self. For everything you need two hands. You are great man
THANK YOU SO MUCH!!!!!!!!, I WAS HAVING GREAT ANXIETY ABOUT TRYING THIS MYSELF, BUT THANKS TO YOUR STRAIGHT FOWARD, EASY TO FOLLOW INSTRUCTIONS, I GOT IT DONE!!!!!!, THANK-YOU AGAIN. TOM
WOW !!!!!! Thanks for the detailed video on how to install a 5th wheel hitch, you did an amazing job and made it look flawless. This will be our very first 5th wheel ever and I am excited to see how it will go, Again, many thinks for your detailed installation video.
Very well expalined. Especially the beginning. I did not know most hitches clip into these rails. Thought it was super complicated to match hitch and rails. Thank you for helping your fellow traveler.
Thanks for this. I was thinking some of the kit was wrong. LOL! So far I'm doing it right then. I'll finish it up in the morning.
You should get into cinema, this is F-ing GREAT documenting!
Great Job. I loved your common sense approach but most of all how good your audio was.
Huge inspiration and motivation to me my brother! The world is yours, you just have to be willing to get up and go face it, and you Sir are a prime example, and a true leader! ✔️🔐 All love man🙏
Excellent presentation and my respect for this gentleman! Thank you for your video
Literally the best step by step install I watched. Laid out every step. Most videos don't.. Plus! Your rocking a 6.5 diesel!
Thank you very much for this video, i bought the exact same fifth wheel hitch because i have an older RV so this helps me a lot and saved me $$$. Thank you.
Love your straight edge, really multipurpose.
Thanks for this informative and very helpful video. I used it to make installing my 5th wheel hitch in the bed of my 05 Chevy 1500 Z71 a breeze. Was intimidated at first, but the video helped to ease my mind.....2.5 hrs. later, the job was done.
Awesome video, thanks for sharing. Sounds weird I've rebut motors but installing a 5th wheel hitch has no d's scared me off. Glad to see it's not nearly as bad as I pictured. Props to you my friend
My dad and uncle had a hard time installing theirs and they had four hands haha they said they we're glad you had this video up and said thank you for it, good job on the work keep it up! 😃 also they thank you for the magnet trick it worked!
thank you rebel cowboy for this video I watched it to help me install mine in my 89 gmc k2500
Dude, I’m very impressed with you. I see you have a problem with your arm. You are doing the installation well, I had problems using two hands.
@spencer5838
2 жыл бұрын
mamma took fermeldahyde
@galvanizedgnome
2 жыл бұрын
@@spencer5838 don't be disrespectful.
And that's how it's done! Terrific video and no useless music or yaking, thanks.
Nice no nonsense installation video . Thank you for sharing
In my World? You're one Helluva man! Thanx for the info as I'm seriously considering buying a truck and a fifth wheel travel trailer. Again...thank you, kind Sir!
Nice job on the opening sound effect. I have noise cancelling headphone on... it caught off guard... nice job.
Excellent instructional video! Great detail and no "skipped" steps!
That was the best, most direct install video I have seen in a long while. I have this very hitch but not the rails. I have found the rails on Facebook Marketplace but the seller wants $100 and won't budge. Anyway, when I get them, now I know what to do.
Wow, great vid sir. Thanks for posting 👍
2 thumps up. Now I want to do mine,... my self because, no one wants to install it. This is what I have to do to my 2009 Chv. truck with my 2nd hand hitch. It was a very good video. Thank you.
Bro, best damn hitch installation video ever made. Hell yea
Best 5th wheel installation how to video out there.....thanks
Great job. You are very resourceful.
Very helpful got her done in like 4 hours.had some problems where it was a oval couldn't get my hand it.so I used hot glue and glued washers and nut together then glued them to stick and had to have some one help me screw in.thank for saving me 400 doll hairs👍
@RebelCowboysRVs
2 жыл бұрын
I used that hot glue trick myself not long ago on a similar project.
Genius using the magnet!
thanks for your video my hats off to you rebel..... city slicker myself
Great work. TY👍
Thank you, you made sense of the near useless Reese instruction sheet!!!
Great video !
Awesome video! Thanks for that! Now I think I can do this myself 👍👍
Nice video Rebel!
this is beyound helpfull.. since i have your trucks twin and i need to get my 5th wheel installed pretty soon. thank you
Good video.. Thanks.. helped me make a decision to buy a used hitch vs new.
Perfect video. A million thanks.
I just completed it using your video thanks so much saved me and my wife some money!!!!
@RebelCowboysRVs
3 жыл бұрын
Glad I could help.
A very informative and useful video.
5 stars ..excellent and very helpful video.....going to make my own brackets but not too sure on the metal thickness .....looks like 10 gage but I'm going to go with 3/16"....again great job on your video!!!
Excellent explanation!!! I will start mine, Thanks a lot.
Great video buddy! thanks man!
I actually used to work as an installation tech at a local hitch supply outlet. I've installed these Reese Fifth Wheel Rails in countless trucks and 98% of them fit like a glove with the proper brackets. Next Spring I may buy a set of brand new Reese Rails for my 2001 Ford F350 Long Bed truck. And I'm highly tempted to install the rails in myself and just purchase the needed drill bits and torque wrench. It honestly isn't as hard as it looks, it's incredibly easier with a second person to help hold the bolt still while the second person crawls under the truck bed to tighten down the nuts and washers. And the drilling involved in the frame rails is hard but it's not insanely difficult. In my case it will be more difficult as the Ford Frame rails in the Super Duty trucks are actually harder steel than a Chevy or Dodge so that makes it harder to drill through. Using a pilot hole with a smaller drill bit is essential to ease the larger needed drill bit through, it makes a huge difference using a pilot hole with all of the holes needed in the installation. Anyways, it was a very well done video tutorial and I give you a ton of credit for not feeling too intimated about doing it yourself with your own hands and tools instead of paying the UN-necessary costs in labor for a hitch shop to do the same thing as you can do.
Great job well done
Awesome video! Thank you very much!
thanks for your video ... very good information
Well done sir, thank you for the video. I't was very helpful and appreciated...
Thank you. Great video.
Thank you very much from Canada! God bless and have an awesome new year!
Great content. That old Detroit sounds healthy. Not too many rattling 6.5s arround NY any more
Great video thank you 🙏
Good job bud
Very helpful
COOL MAN Great video ....
Well over half who’ve watched this couldn’t do it with four hands. Lol very impressive. And informative video
I know this is an older video but very nice how to video.
Great video thanks you
Thanks so much for the vid. I hope I can do it with three men and a boy, much less by myself.
I love the milk carton as a straight edge. That's how we do it, make it work
This helped a lot! Good thing I own a welder, I would hate to drill through my frame
@Justin-Outdoors
3 жыл бұрын
Welding isn’t much better for your frame. The heat can cause weak point and fractures
Really helped me grasp the situation where I ended up with a hitch (bought it with the 5th wheel) but former owner had the original rails welded to his truck. So...I've heard so much discouraging information....you can't find rails...etc. Plus, the hitch, appears to be a fine one, isn't marked at all as to the manufacturer. So to find a set of rails...that's confusing. But at least, with your video I have hopes there is a universal rail kit out there. One thing is different. Your rails are horizontal in your truck bed. This hitch, it's original rails were exactly the opposite. Being on a budget....I'm hoping I will be able to find a solution to use this good hitch....but find rails. Your video sure took the mystery out of the size of the job to actually do this rail installation. Estimates to do this from the RV guys.....around $1,000.00 and most of them don't want to use my hitch. So, there's a learning curve. Again, great video!
Good video paw paw.
Thank you sir!
awesome thank you
Informative video. The welds don't appear to have the best penetration on the frame rails though. How is it all holding up?
I've got the same 5th wheel hitch in the bed of my 1973, c-30 CHEVY DUELLY trk
THANK YOU
I am subscribing!
Would you put grease or any paraffin like wax/ dry lube on the friction surface?
Thanks for the video it was great my naboor put mine on the wrong way it's not safe the way it looks right now going to put it in the shop so I can feel safe instead of sorry my nobor was totally wrong how he did but thanks for the great video god bless
Great Job! However I'd feel better and safer with drilling through the frame and bolting the mounting brackets to the frame. I fear the welds may break. So I'm going to bolt it on. Again, Great video cowboy.
Thx!
Thank you for this video! How heavy of a camper can your truck tow? Im look at a 97 dually 454 and am planning on doing the same thing.
@RebelCowboysRVs
3 жыл бұрын
Mine with the diesel and 3.42 highway gear, it is rated at 6K pounds. It really feels that. I believe the 454 with the 4.11 gear is rated at 10K pounds and the 4.56 gear was something like 12K pounds I would think both can safely stop 12K, but the 4.10 gear would cook the trans after a while.
Good job.Liked the video but why not use a 1/8 pilot bit them the 7/32? Would be less chance of moving the frame.Im looking to do the same job and move to Alabama or S,C
I have the same year truck but my rails don't have all the extra holes on the ends. There mounted with 4 bolts only. Will this work
@RebelCowboysRVs
6 жыл бұрын
Roger Belcher if the holes are all in the same place, I would assume those rails won't work on this model of a truck. The frame rails are not straight. You would probably have to buy the universal rails like the ones I have.
In my search for a 5th wheel receiver, I'm noticing that they are made specific for certain trucks. My question then is if you use top mounted bed rails that are universal, then isn't it a moot point?
@RebelCowboysRVs
Жыл бұрын
I am not aware of any truck you can't use a standard rail system on. Then you can use any hitch made for those rails. That being said, if a company makes a rail kit for your truck, it may be worth the money for time saved. And It looks like the rail system is becoming outdated. A lot of new trucks have what they call a puck system, where the hitch drops through holes already in the bed, locking to the frame directly. That started about 10 years ago. No need to drill more holes in your truck. I have no experience with those myself, but I think I would use that if my truck had them, and I could afford it. Rails are not usually in the way when not in use, but they can be at times. They also make adapters to use regular rail hitches in a truck bed with pucks. There have also been some specialty hitches for quite a while that don't use the rail system at all. It use to be easy to pick a hitch, an a good day's work installing it. It's starting to be the other way around. But I have never even touched anything other than a universal rail system. My truck is to old for anything else, an my wallet can't afford anything fancier.
Do you think this all will apply to a 99 Chevy Silverado 6 foot bed 1/2 ton 4X4 to haul a 31 foot camper
@RebelCowboysRVs
2 жыл бұрын
A sliding hitch is usually recommended for a 6 foot bed, for turning. Some of those have their own mounting system and some use regular rails like this. If you get one that uses rails, its pretty much the same installation. You can use a regular 5th wheel hitch, but you have to be careful to not get in to the back of your cab turning. A 31 foot trailer is also probably pushing the limits of a 1/2 ton truck, so make sure the trailer does not put you over weight, and the tongue weight is not more than the trucks payload rating.
If the instructions say the hitch is 1.5 inches ahead of the axle, couldn't you just subtract 1.5 inches from the back of the bed to the first rail measurement to get you on center of the axle?
I, welded mine to the frame
Great video...very informative....but Do Not Weld Your Brackets To The Frame...
What is the part number for the rail kit you bought???
@RebelCowboysRVs
4 ай бұрын
Reese Towpower 30035 amzn.to/3ucOzXM
For a 83ford f250
My question is does the rails and hitch have to be the same brand?
@RebelCowboysRVs
2 жыл бұрын
Some hitches need a special setup, but the ones using these cross rails all seem to be the same.
@RBoysMedia
Жыл бұрын
Most rails are universal. And are rated for most weights. Double check before buying don’t use me as insurance👍
Whats the length of the bolts ? 2"
@RebelCowboysRVs
3 жыл бұрын
Its been a few years now, but they were around that. I bought the rails and hardware as a kit from Amazon. amzn.to/3ucOzXM They have the bolts and hardware as a kit without the rails too if you already have them.
Sorry sir ,I don’t know how to get it?
It is legal welding on the frame ?
@RebelCowboysRVs
3 жыл бұрын
Yes. Lots of aftermarket hitches and other parts are meant to be welded on.
would this work on ford super dutys
@RebelCowboysRVs
2 жыл бұрын
It's pretty much the same. The frame is probably not the same width and uses different holes in the rails.