Мне седьмой десяток, трудовой стаж более 45 лет. Во истину, я всю жизнь работал, обрабатывая металл последние, без малого двадцать лет, работаю на авиа заводе (моторостроительном) инструментальщиком станочником, изготавливаю полный ассортимент режущего инструмента. То есть опыт работы с металлом, вся жизнь. Но смотрю это видео, и зрелище просто завораживает, происходящее смахивает на колдовство. Это магия, каких нибудь 20 - 30 лет назад, такое и представить нельзя было. Абсурд заключается в том, что в общей массе человеческая раса тупеет, а робото-техника стремительно развивается. Наблюдаю некий пугающий дессонанс. Восстание машин может оказаться не вымыслом а пророчеством.....

Nice to see such machinery in action hard turning is what we strive to be good at. We liked what looked to be the Delrin if not another poly chem product material gear cutting as well, thank you for sharing. Lance & Patrick.

Simply beautiful. Poetry in motion.

One of the most incredible inventions of all time.

Incredible machines

@gianpietromigliorini9563

5 жыл бұрын

Viper6 📳♒️❌

Amazing!

So SATISFYING!!! I LOVE IT!

That conveyor belt system was like watching a race where everyone's a winner. Absolutely fascinating and oddly soothing.

А Где Мы со своими станками по металлообработке??? В Далёком прошлом...🗿🛐💯

It's still amazes me how strong end mills are!! Just amazing!

@georgepapadimitriou4965

3 жыл бұрын

this is aluminum dont get amazed LOL

@mennomeilink4660

2 жыл бұрын

@@georgepapadimitriou4965 still pretty fast machining

@jimmywalles1

2 жыл бұрын

@@mennomeilink4660 still pretty fake video... or do they all talk that fast over there

@trxtech3010

Жыл бұрын

Not a "Mill" it's a CNC Machine

@JF32304

Жыл бұрын

@@trxtech3010 the CNC machine is nothing if the tool is junk. The strength of end mills amazes me...

Amazing to watch, just wondering how quickly we have developed this technology, we've progressed so far in so little time

Incredible and quick machines!

Bài hit làm mưa làm gió một thời của chị Bảo Thy. Cám ơn Đức Phúc mang nó trở lại với màu sắc mới ❤️❤️❤️❤️

amzing !! I can't stop seeing

9:21 Grundlagen des konventionelles drehen :DDD

I would love to know more about the complete engine that the block being made in the first section is for!

@katralavinodkumar6851

5 жыл бұрын

First section is made by casting process bro

@wolframstrempfer149

3 жыл бұрын

It's solely a demo part. See here.: kzread.info/dash/bejne/laxpo7uiqbOsmKw.html

@superjon78

3 жыл бұрын

Wolfram Strempfer - that’s a bummer. There’s certainly an opportunity missed.

Loving Hermle😍

Nice. But regarding the 1st piece of material: i've been working on an old deckel maho 60 (manufactured in 2002 i belive) and one day the manager comes and says we have an urgent task. So i pushed the "old fart" to it's limits(12k rpm and 4200 vf with 4 mm increment on z axis) on a hard material(don't know the denominations it was what we call silver-steel-carbon) That old machine rocked!! Altough the end mills were useless after that program😁😁 Nice video!!👍

The machines also carved out the sound to make the soundtracks you heard! That is one step ahead..

This is awesome! Thanks for uploading and sharing. 10:38 multi timed! PRICELESS -- Plus at 12:38! Awe Amazing! (just needed a tail - just saying) ---

It's already here - machines create machines!!!!! 😀 11:51 - lathe combined with another 5+ axis CNC center, that's totaly sick

Should have included the Makino mag ex 3. That thing can crank out 37,000 rpm and 700 ipm.

@xz3693

2 жыл бұрын

Hell yeah. Makino is awesome. I worked at a place that was able to run for 5 days straight, by itself, 24hrs/d, from a pallet stacker that fed two machines. Amazing.

@Anthony-uz5tj

Жыл бұрын

@@xz3693 i cant walk away from my machine for 10 mins without shit breaking

It had to be a genius that invented and made this machine.

Fast forward ... you can hear it at 6:35

That first 5 axis bed is a work of art instant repeatable precision wow

@StealRidePark

4 жыл бұрын

overall an amazing machine im espescially impressed by how well it blends the bores with just an end mill. The precision and speed is just insane indefinately.

@BenjaminGoose

Жыл бұрын

"a work of art instant repeatable precision " a what now

As a machinist this is an art. Having a perfect cycle time with every rapid in the right spot just machine gunning chips. It's a beautiful thing(still makes my stomach turn seeing that shit run dry, I understand it's for the vid though)

@paulgallagher2937

Жыл бұрын

I was in CNC machining for more than 30 years. Yes its very cool to see this. Most people don't realize this took weeks or months of engineering work to perfect that machining sequence. Of course in the real world, its never that fast, or you would spend more money on cutting tools than the value of the parts. But can come close to this.

@Pidalin

9 ай бұрын

Unfortunately, on new CNC machines it's more and more hard to program that because you have no actual control over that, you have to draw it in some stupid cad-like software and then click and add some milling with very limited possibilities. My oldschool G code programs on older machine are perfectly optimized, but on new machine, it's just doing something and very often it would be to complicated to change it. But on other hand, new machine can at least change tools while riding in X axis, so at least something, that can make a difference, I would love to have this feature on older machine, but maintenenace person said that it would be to complicated to add such feature and they are not able to do that, producer of that machine would have to completely reprogram that and they won't do that for machine which is 8 years old.

@Pidalin

9 ай бұрын

@@paulgallagher2937 Weeks or months? Some my programs took literally years to make it finally perfect. 😀 Sometimes you are doing it somehow and 1 year later you have genius idea and you are surprised why you didn't find out that earlier. 😀 I work only with wood, most of programs are not really complicated, but when you work with metal and to make one part can take even hours, I can't imagine optimazing it, it really has to take months because you need to see that program many many times to see all things which need some improvement during that program. With wood there is another problem, you have to respect wood fibers and if you do some milling in wrong order, product will look really bad. Sometimes it's expected that some milling will pinch out peace of wood and that's why you do it first and then you format final size of that product or something. People think it's simple to program some stupid kitchen table plate, but it's more complicated than they realize and they really don't pay us enough for such responsibility.

I will show this to my old dad xD

50 seconds was it for me. It's cutting aluminum which for machining is one step above butter.

That first machine was hauling ass. Would really like to know what cutters and machine that was. It gave beautiful finishes!

@therealthreadkilla

2 жыл бұрын

It's cutting aluminum which for machining is one step above butter.

So they speed up video playback and everybody creams their jeans.

Yeah that speed is awesome, until that end mill seizes for no reason and knocks that head out of alignment. :) Good shit.

@jimmywalles1

2 жыл бұрын

ye the speed that the people talk in the background is awesome aswell... i wish i could speak that fast

I've seen farm-raised pigs, but never have I seen Factory raised pigs

I enjoyed. that was perfect

I've machined that fast. Its the cutting tools that is making the difference

@user-sk9hl7si7l

5 жыл бұрын

how much kW those cnc eat up ?

Nice demo.

14:22 amazing!

Pretty amazing stuff, though the capital (and consumables) cost places this far beyond "hobbyist level" :-D

@chrisCKDE

5 жыл бұрын

Yeah, most machines at my workplace range from 500k - 2mil.

Круто!

9:21 I am pretty shure that is NOT a CNC machine...

@mrono1910

5 жыл бұрын

Henrik Paulsen no thats a lathe...

@HepauDK

5 жыл бұрын

@@mrono1910 I shoul know. I apprenticed for 3 years as a fitter, a great deal of that time was spent at a lathe similar to the one in the video. :P

@user-hs2hd7wp9g

5 жыл бұрын

That's a top of the line 5 axis CNC machine

@suicideris

5 жыл бұрын

CNC - Computer Numerical Control. Pretty much any machine can be a CNC. CNC router, CNC mill, CNC plasma, CNC grinder, CNC pick and place, CNC water jet, CNC wire cut EDM, CNC LATHE and so on.... Most of them can be 2, 3, 4, 5 axis....

@HepauDK

5 жыл бұрын

@@suicideris The machine in the video however, has no computerized controls whatsoever.

The cut groves reminder me of the ancient city carved out of the bedrock .

These machines are badass, at work we have only 3 axis CNCs. I wish the company bought one large 5 axis CNC. It would save us so much time.

@Pidalin

9 ай бұрын

Push them to buy that, they will save a lot of money after some time and products will be better. We also had only 3 axis in furniture company and you are constantly doing some things in more steps, you have to remove it and put it there again other side up or something, it's very annoying, complicated and it makes training of new workers really hard. You have to constantly switching tools because some tools can work only on this side and other tool on another side.....it's impossible to train new people when it's that complicated, everyone will immediately crash it. We would be totaly screwed now without new 5axis machines because in last 5 years, they created so many new products where we really need 5 axis machine. But with 5 axis, there are new problems, like spindle is really big and you have to be really careful to not hit something with that, especially when you are using beams+suckers system which we have for wood working. In last few years, things started getting better, there are no people who could od that work on work market, so company has no other option than to invest to technology, buy better tools etc...to make it faster and better. Some old bosses went finally to pension and finally we can have what we really need. We forced our owner to buy a second 5 axis machine during covid when people were constantly ill and many people ended (many foreign workers returned home), so we really needed second 5 axis machine and I was surprised that our owner just bought that and it was not a big problem. We have a new manager in last years and he is not that stupid as our older bosses, he knows that we just need it, so who cares that it cost 200 000 eur, we just need it. The point of CNC is that you program that, put material there and it will make whole product in one step, when you have to manualy change tools and turn product manualy several times, it lacks the point of CNC machine and your bosses and owner should understand it. You can do it whole manualy then and it can be easeier than do it on CNC like that.

12:50 must have made from pig iron!

Some of these machines run finishing passes faster than my shops roughing. Lol

@toddsecor288

5 жыл бұрын

Some of the video speed is sped up.

@drewjohnson4794

5 жыл бұрын

I think you meant that the other way around.

@o11o01

5 жыл бұрын

@@drewjohnson4794 Nope, we don't exactly push the envelope when it comes to speed.

Awesome tool

Amazing machines.Btw song name? 10:22

I was apart of the transformation generation of machinist. Worked in old manual factories then first generation CNC factories. CNC machines that monitored toolwear and inspection process. Watched a large military contractor close factories because unions would not except changes. Seen and predicted vacant lots.

Какой же пиздатый люминь или дюраль для таких демонстраций...

I enjoy watching woodworking tools do their cutting but this just takes it to another level. CNC machines are pure sex to a machinist, or anyone for that matter. My father was a foreman in a tool company back in the 70's called Elliot in Jeanette PA. He told me stories back then that blew my mind and I can only imagine the possibilities today. His company worked with back then state of the art equipment and for fun they used to duel with a Japanese company. They would send items back and forth just to out do each other for the sport of it. Mind you this was back 40+ years ago. My Father's company sent their rival a metal tube no wider than a human hair. I can't imagine a need for such a thing but they wanted to prove it could be done. Weeks later the Japanese machine company sent the same tube back.......tapped. Again, this was 4 decades ago. Today? Today they could probably line that same tube with micro fiber optics for pennies a mile.

@innominatum9906

5 жыл бұрын

A threaded 0.03mm diameter tube? I'm sure your father and his friends made some neat tools and shit, but that one is stretching it a bit far ;)

@wingmanalive

5 жыл бұрын

@@innominatum9906 Lol well it was my Father's story, NOT mine. I think he meant it was drilled and tapped not on its' length but its' side. Either way it was an awesome display for the time.

@PGspeed88

5 жыл бұрын

Hate to say he probably fed you a lie. I've heard that story many times before, but usually it's the US company sending a .005 diameter screw and a Chinese company sending it back with a hole through the center, pretty common story that I've come to doubt over the years. Not that doing those things are difficult nowadays anyway.

@wingmanalive

5 жыл бұрын

@@PGspeed88 Well today they have micro machines making micro machines. Nano technology is real.I'm sure you've heard an average calculator today has more computing power than what got the Apollo missions to the moon. Those kind of things I enjoy learning about.

@Pidalin

9 ай бұрын

I also work on woodworking CNCs and I can't imagine to program these metal parts, It's totaly enough for me to program our stuff, I would probably jump under train if they wanted from me to program some airplane engine or something. 😀

Look at that thing go!

9:40 hope the machining is better than than masonry work behind.

@aaronhobart4763

5 жыл бұрын

MagnetOnlyMotors haha what they do lay the bricks the wrong way?

Excelente, ^^

What machine is using the minimaster plus at the 7:27 mark?

How much rpm effect the force that’s applied to the cutting tool?

Впечатление такое что это чисто демонстрационные образцы -- для рекламы возможностей оборудования.

i want to know where the machin made it used

Das in 1080p wäre perfekt

look at that thing devour metal, beautiful.

Wish I had this type of cnc at my work

@aemkhanvlogs3285

5 жыл бұрын

I like work

metal? feed rate? spindle speed? xD

@GroundUpDesigns

2 жыл бұрын

Definitely aluminum, feed rate ? Yes, spindle speed ? Yes .

Aluminum is easy to cut through

Titan called; he said you can't do anything over 1000ft/min because it makes him look slow 0.o Jkkk. Really though, as Impressive as this is, I find the harder materials to work with that can't be run as quickly are still extremely fun to behold

How do you metals without coolant? Do you ever get metal binding to the tool? Or are all the endmills using inserts?

@avenged3118

5 жыл бұрын

these are probably machines at an expo, showing off what they can do. with coolant it would be kinda difficult to see

@chrisCKDE

5 жыл бұрын

there are so many factors that you need to meet to do that kind of stuff, ranging from cutting speed to forward movement sped (?) (sry I only know the German words) to heat tolerance of the tool and wear rate of the tool. most of the new tools are high-quality machining tool steel (or something like that) or carbide elements.

@jamesjarmon7383

5 жыл бұрын

Aluminum is so soft, you dont need coolant. Brass, cast iron, and titanium are also milled dry. Coolant does give you a better finish on most metals though.

@Tischlerimkopf

5 жыл бұрын

Because of the speed, the Chips are already way gone before they can bind to the cutter, thats why you dont need "cooland" they are blown away by the Air hose, that gives a little Bit Advantage, and helps to get the Chips Out

Это видео конечно чисто для демонстрации станка. Наяву же он будет раза в 2 как минимум медленнее. Во первых на таких скоростях убьешь станок быстро, ресурс инструмента конечно же уменьшится. ну и конечно же взяли бы не дюраль, а сталь типа х12мф и т.д., которую у нас в основном и обрабатывают и показали скорость обработки. Я сам на ЧПУ уже лет 20 и по опыту скажу что это чисто паказуха.

@SshAleksandr

Жыл бұрын

Здесь станок лохматого года выпуска только для сравнения вставили. Но смысла этой вставки я не понял.

好強喔

В начале какая скорасть обработки?

40х пусть попробуют на таких режимах резать, станок развалится)) А то алюминиевый пластилин показывают.

I would put a Makino ahead as far as EVERYTHING goes :-)

Dudes voice was all speeded up. Thought the CNC machines were really this fast

Where are these machines sold? link please?

It make steel look like butter with reflection

I can do all that on a manual mill in 2 months +/- 1 month. ; ]

@toddsecor288

5 жыл бұрын

Lol.

@KippoHound

5 жыл бұрын

So fuckin true tho! 😂

@mohdnorshahril3089

5 жыл бұрын

2 week for me

@Oclb

5 жыл бұрын

Nice tolerance you got😔 lead man gave me a tolerance of +0, -1. And he holds me to it

@Birb_of_Judge

Жыл бұрын

I wanna see you make that pig on a manual mashine 😂😂

This for an engine?

А что за станок на 6:12(eng:what for the machine at 6:12 )

Amazing

厲害的是 刀具 刀具不夠硬 鋒利 一加工 就斷了

It looks so fast for me. I have been working a machinist for 34yrs . Most all the time I run Matsuura ,Hass, and Mori seiki with fanuk control, so I have more time to check the parts 100% . if I scrapped 2 or 3 a month they might be unhappy or ....... the job I do call out .ooo1-.0005 tolerances Specially boring holes.

@lifewithfelipe7288

5 жыл бұрын

kham vongxay damm 34yrs? And I just barely getting started on training next week by Tuesday

@juniorjohnson9509

5 жыл бұрын

These speeds listed are not all that great nowadays, when you look at the latest high-speed machines that run at 30K rpm and feed rates around 1000 IPM.

الله العلم نور

That’s a lathe for sure

How many thou are you taking off per pass? That looks like a block of aluminum, so I'll guess 35 thou per pass? Maybe more

削るの、楽しそう。でも、鋳物でできないの？

I am wondering where is the heat going? Material expands from heat, how can this be accurate?

I would have liked to seen the beginning of that program

How much for the metal pig? I want one.

its aluminum..very easy and fast to machine. 5 axis machining is neat to watch though

@aK47r0

5 жыл бұрын

This is beyond fast in my opinion.

ok guys..i am working with different CNC mills. from mahos of the 90s to Hermle of the 2015 and 5 axis of the newest generation... the speed with that the table is turning is a way too fast imo. why u are manipulating the video when the original speed is quite impressive enough . nowadays the speed isn´t the impressive stuff.. high end tools and stable machines are often standard.. try to craft a prototype with accurancy of less than 0.01 mm with the first try and that speed .. that is impressive

@MineProful

Жыл бұрын

Watch Titans of CNC Videos

@daniellange1912

Жыл бұрын

@@MineProful i know those videos..nice to watch but a lot of show as well

@idraugr5725

Жыл бұрын

A lot of animosity towards those guys is seems. Have you machined titanium and inconel?

@daniellange1912

Жыл бұрын

@idraugr5725 yup..titan not as much as inconel ..no animosity..I am just not a big fan of videos that show standard manufacturing processes and do like that is the Supa mega epic roxxor stuff .. that is what I mean by saying "a lot of show"

@chuchonchuchon7640

Жыл бұрын

​@Daniel Lange completely agree about Titans of CNC Makes me lol when they bring out their fancy tork wrenches for a set screw lol

God, how much metal goes nowhere .. but I have to admit that it's beautiful

@sturmifan

Жыл бұрын

you know that metal is being caught and sold to a resmelter to make something else right?

@rmkensington

Жыл бұрын

I'm sure it all gets thrown away genius

Sure that first one is amulinium no?

Increíble

Usinar alumínio até minha vó faz kkkkkkkkk

Ist das 5 axen Maschine?

i think someone used G00 instead of G01 :D

@sheikhtassavurahmed44

5 жыл бұрын

ya I think so too 🤔

@mira238

4 жыл бұрын

:D

for what machine, please tell me

13:09 oops

It says lathe. Pretty sure it’s a 5 axis vmc

It's the V4 Engine from ?

хрушку круто сделали

What's the time needed to program the first part from this video?

@antonsjoberg

5 жыл бұрын

Djordje Manojlovic they probably use CAM

@kennethdiehl465

5 жыл бұрын

Most intricate designs (and production parts) use cad/cam software to write the program, however the programs still need minor tweaking from the programmer/setup person

11:30 why not just by a tow ball?

That first machine cost me $267000. So it would have to be good.

@df71091

5 жыл бұрын

There are machines above 1 million tho

I wish I could create my own desktop chassis and custom motherboard and water blocks and radiators etc.. would be the ultimate incentive