In this video I fabricate a front valence on Kirby’s 32 Ford Roadster To support this channel please checkout www.lgspeedkustom.com/shop Thanks for watching
Жүктеу.....
Пікірлер: 41
@AndyGeesGarage3 күн бұрын
That roadster is really getting its own personality thanks to Kirby’s ideas and your hard work.
@marknelson17124 күн бұрын
Glad you got the coil, I felt you were the perfect person to give it to. Enjoy my friend.
@LGKustoms
2 күн бұрын
Thanks again!
@joealbert7773Күн бұрын
People do not realize how long something that looks so simple takes; great job.
@jeffsnyder2051Күн бұрын
Lee,i think you are part artist&part teacher.its great how you explain not just the process but also the tools for those who dont know.the valence turned out killer!!! THANKS!!!
@Zenny_69694 күн бұрын
...a tip of the hat to Kirby's vision for his 32.....between that and your skills Lee, it is a pretty slick ride.....
@keithshively8434 күн бұрын
Great problem solving - as usual. nice and clean - those panels flow with the lines of the car and look like the belong as they should.
@gkanderson924 күн бұрын
Nice finishing touch. Great solution on mounting following customers guide lines. Lux now has a good start on his t-shirt collection. I hope he has an LG speed and custom.
@floridian71434 күн бұрын
Thanks for sharing, nice clean work!
@geoffrycolyer134 күн бұрын
Great work adds a nice look to finish off the front with the rear
@murdoc65013 күн бұрын
Nice design and fabrication...and ties together with the belly pan really well! You should hit up Karl (Japhands) and get one of his deep throat bead rollers (or HEY BAILEIGH set a brother up!). As always, great stuff and thank you for sharing! Go LGKustoms, keep moving forward!
@shotsrodder4 күн бұрын
I was hoping that you would weld the nuts on from the beginning 😂😂 nice work Lee
@matthewschneider20894 күн бұрын
Dude!!! Great job!!! Too bad you couldn't of mounted to the side of the frame!! Clearer looking!!!✌️
@henrydevries14073 күн бұрын
Great job Lee, nice work.
@georgeponnay4473 күн бұрын
Awesome stuff as always, Lee!
@tonymartin42554 күн бұрын
dude build yourself a pipe anvil like matt at iron trap garage I did you won't regret it 32 looking so cool amazing how more finished it looks
@S7midnight
4 күн бұрын
Could you find a link to the episode?
@AndyGeesGarage
3 күн бұрын
@@S7midnightjust search pipe anvil there are lots of how-to videos
@LGKustoms
2 күн бұрын
I’ve never seen a pipe anvil before, so l looked it up. Brilliant. Thanks for the suggestion
@psnaith14 күн бұрын
looking bad ass!
@SpankysHotRodsandCustoms3 күн бұрын
Great job!
@LGKustoms
2 күн бұрын
Thanks!
@bruceedgecomb87224 күн бұрын
keep up the great work
@waynespyker57314 күн бұрын
I'm not a valance fan but you nailed it! I prefer the stock 32 frame frame horns, full radiator grille and chin exposed with only a spreader bar. But the internal openings were partially boxed so all is good. What is the mounting hole spacing for cast aluminum club plaques?
@keithwilder27413 күн бұрын
Love the direction of the 32… just crossing my fingers that you change out the wheels.
@LGKustoms
2 күн бұрын
I know… I’ve talked to Kirby several times about the wheels, but he’s not interested in changing them up.
@pamdunn84544 күн бұрын
i saw you bending the panel over the vice stand you might want to add brackets and a 1 1/2 - 2 inch length of pipe "top to bottom" for a panel bending anvil ?
@russellrobinson42024 күн бұрын
I think you're on to something here, if u make LG customs license plate with the loovers in it maybe the province on it I will definitely order 1
@garylietz63053 күн бұрын
Love it........
@timferriss9054 күн бұрын
Another nice detail. It’s nice the owners vision can be put on the car. I would be proud to drive that car around for the rest of the summer. Lee I think you nailed it and made another customer very happy. (Q) what top is that. Is it a bop top. All the very best wishes. Tim.
@LGKustoms
2 күн бұрын
I’m not sure who made the top.
@GreggGonzalez-ei1gu3 күн бұрын
Awesome 👍
@LGKustoms
2 күн бұрын
Thank you! Cheers!
@toddbader61044 күн бұрын
I would almost bet that Rob Petty has a 32 BC plate he would sell. I bought a really nice pair of 32 Saskatchewan plates for my tudor from him.
@LGKustoms
2 күн бұрын
You can’t run vintage plates in BC unfortunately.
@toddbader6104
2 күн бұрын
@@LGKustoms that's shitty!
@PeterHatch-mx7zc4 күн бұрын
😁👍
@PeterHatch-mx7zc
2 күн бұрын
No worries👍
@brentmclovin93324 күн бұрын
How much was the backing plates chrome job? It’s a beautiful car!
@LGKustoms
2 күн бұрын
I think it was around $500 to chrome them
@rustedjunkgarage33162 күн бұрын
Very nicely thought out and fabricated. The louver press is way cool. 🫵🏼💯🆒
Пікірлер: 41
That roadster is really getting its own personality thanks to Kirby’s ideas and your hard work.
Glad you got the coil, I felt you were the perfect person to give it to. Enjoy my friend.
@LGKustoms
2 күн бұрын
Thanks again!
People do not realize how long something that looks so simple takes; great job.
Lee,i think you are part artist&part teacher.its great how you explain not just the process but also the tools for those who dont know.the valence turned out killer!!! THANKS!!!
...a tip of the hat to Kirby's vision for his 32.....between that and your skills Lee, it is a pretty slick ride.....
Great problem solving - as usual. nice and clean - those panels flow with the lines of the car and look like the belong as they should.
Nice finishing touch. Great solution on mounting following customers guide lines. Lux now has a good start on his t-shirt collection. I hope he has an LG speed and custom.
Thanks for sharing, nice clean work!
Great work adds a nice look to finish off the front with the rear
Nice design and fabrication...and ties together with the belly pan really well! You should hit up Karl (Japhands) and get one of his deep throat bead rollers (or HEY BAILEIGH set a brother up!). As always, great stuff and thank you for sharing! Go LGKustoms, keep moving forward!
I was hoping that you would weld the nuts on from the beginning 😂😂 nice work Lee
Dude!!! Great job!!! Too bad you couldn't of mounted to the side of the frame!! Clearer looking!!!✌️
Great job Lee, nice work.
Awesome stuff as always, Lee!
dude build yourself a pipe anvil like matt at iron trap garage I did you won't regret it 32 looking so cool amazing how more finished it looks
@S7midnight
4 күн бұрын
Could you find a link to the episode?
@AndyGeesGarage
3 күн бұрын
@@S7midnightjust search pipe anvil there are lots of how-to videos
@LGKustoms
2 күн бұрын
I’ve never seen a pipe anvil before, so l looked it up. Brilliant. Thanks for the suggestion
looking bad ass!
Great job!
@LGKustoms
2 күн бұрын
Thanks!
keep up the great work
I'm not a valance fan but you nailed it! I prefer the stock 32 frame frame horns, full radiator grille and chin exposed with only a spreader bar. But the internal openings were partially boxed so all is good. What is the mounting hole spacing for cast aluminum club plaques?
Love the direction of the 32… just crossing my fingers that you change out the wheels.
@LGKustoms
2 күн бұрын
I know… I’ve talked to Kirby several times about the wheels, but he’s not interested in changing them up.
i saw you bending the panel over the vice stand you might want to add brackets and a 1 1/2 - 2 inch length of pipe "top to bottom" for a panel bending anvil ?
I think you're on to something here, if u make LG customs license plate with the loovers in it maybe the province on it I will definitely order 1
Love it........
Another nice detail. It’s nice the owners vision can be put on the car. I would be proud to drive that car around for the rest of the summer. Lee I think you nailed it and made another customer very happy. (Q) what top is that. Is it a bop top. All the very best wishes. Tim.
@LGKustoms
2 күн бұрын
I’m not sure who made the top.
Awesome 👍
@LGKustoms
2 күн бұрын
Thank you! Cheers!
I would almost bet that Rob Petty has a 32 BC plate he would sell. I bought a really nice pair of 32 Saskatchewan plates for my tudor from him.
@LGKustoms
2 күн бұрын
You can’t run vintage plates in BC unfortunately.
@toddbader6104
2 күн бұрын
@@LGKustoms that's shitty!
😁👍
@PeterHatch-mx7zc
2 күн бұрын
No worries👍
How much was the backing plates chrome job? It’s a beautiful car!
@LGKustoms
2 күн бұрын
I think it was around $500 to chrome them
Very nicely thought out and fabricated. The louver press is way cool. 🫵🏼💯🆒