Пікірлер

• 
  @flatcreeker4619 сағат бұрын

  Where did you get your 6v fuse blocks and otther components? I know I can use some 12v items so long as my current is low but I'd rather do it right. ,

• 
  @jeffsnyder2051Күн бұрын

  Lee,i think you are part artist&part teacher.its great how you explain not just the process but also the tools for those who dont know.the valence turned out killer!!! THANKS!!!

• 
  @RyancaresaboutyouКүн бұрын

  Dang I’d love that upgrade in my 61. You guys are kick as*! Went from cruising to crushing it 🛞💨. Thanks for sharing!

• 
  @RyancaresaboutyouКүн бұрын

  So happy to have found this! I have a 61 out in CA. And am slowly working my way to turning it back into a daily driver. Keep the videos coming, lookin good 🤙🏻. Have any tips lemme know!

• 
  @LGKustoms17 сағат бұрын

  Cool man! We did a full build series on this car. Check out the playlist

• 
  @joealbert7773Күн бұрын

  People do not realize how long something that looks so simple takes; great job.

• 
  @user-rr4fo5ml2mКүн бұрын

  Do you have the roadster design on a black hoodie?

• 
  @LGKustoms17 сағат бұрын

  Sorry I don’t have any hoodies for sale. Just t shirts.

• 
  @rustedjunkgarage33162 күн бұрын

  Very nicely thought out and fabricated. The louver press is way cool. 🫵🏼💯🆒

• 
  @GreggGonzalez-ei1gu3 күн бұрын

  Awesome 👍

• 
  @LGKustoms2 күн бұрын

  Thank you! Cheers!

• 
  @SpankysHotRodsandCustoms3 күн бұрын

  Great job!

• 
  @LGKustoms2 күн бұрын

  Thanks!

• 
  @keithwilder27413 күн бұрын

  Love the direction of the 32… just crossing my fingers that you change out the wheels.

• 
  @LGKustoms2 күн бұрын

  I know… I’ve talked to Kirby several times about the wheels, but he’s not interested in changing them up.

• 
  @murdoc65013 күн бұрын

  Nice design and fabrication...and ties together with the belly pan really well! You should hit up Karl (Japhands) and get one of his deep throat bead rollers (or HEY BAILEIGH set a brother up!). As always, great stuff and thank you for sharing! Go LGKustoms, keep moving forward!

• 
  @garylietz63053 күн бұрын

  Love it........

• 
  @georgeponnay4473 күн бұрын

  Awesome stuff as always, Lee!

• 
  @AndyGeesGarage3 күн бұрын

  That roadster is really getting its own personality thanks to Kirby’s ideas and your hard work.

• 
  @henrydevries14073 күн бұрын

  Great job Lee, nice work.

• 
  @shotsrodder4 күн бұрын

  I was hoping that you would weld the nuts on from the beginning 😂😂 nice work Lee

• 
  @timferriss9054 күн бұрын

  Another nice detail. It’s nice the owners vision can be put on the car. I would be proud to drive that car around for the rest of the summer. Lee I think you nailed it and made another customer very happy. (Q) what top is that. Is it a bop top. All the very best wishes. Tim.

• 
  @LGKustoms2 күн бұрын

  I’m not sure who made the top.

• 
  @russellrobinson42024 күн бұрын

  I think you're on to something here, if u make LG customs license plate with the loovers in it maybe the province on it I will definitely order 1

• 
  @toddbader61044 күн бұрын

  I would almost bet that Rob Petty has a 32 BC plate he would sell. I bought a really nice pair of 32 Saskatchewan plates for my tudor from him.

• 
  @LGKustoms2 күн бұрын

  You can’t run vintage plates in BC unfortunately.

• 
  @toddbader61042 күн бұрын

  @@LGKustoms that's shitty!

• 
  @psnaith14 күн бұрын

  looking bad ass!

• 
  @matthewschneider20894 күн бұрын

  Dude!!! Great job!!! Too bad you couldn't of mounted to the side of the frame!! Clearer looking!!!✌️

• 
  @keithshively8434 күн бұрын

  Great problem solving - as usual. nice and clean - those panels flow with the lines of the car and look like the belong as they should.

• 
  @Zenny_69694 күн бұрын

  ...a tip of the hat to Kirby's vision for his 32.....between that and your skills Lee, it is a pretty slick ride.....

• 
  @DavidHorsnall4 күн бұрын

  Let’s do a trailer refurb!

• 
  @floridian71434 күн бұрын

  Thanks for sharing, nice clean work!

• 
  @tonymartin42554 күн бұрын

  dude build yourself a pipe anvil like matt at iron trap garage I did you won't regret it 32 looking so cool amazing how more finished it looks

• 
  @S7midnight4 күн бұрын

  Could you find a link to the episode?

• 
  @AndyGeesGarage3 күн бұрын

  @@S7midnightjust search pipe anvil there are lots of how-to videos

• 
  @LGKustoms2 күн бұрын

  I’ve never seen a pipe anvil before, so l looked it up. Brilliant. Thanks for the suggestion

• 
  @marknelson17124 күн бұрын

  Glad you got the coil, I felt you were the perfect person to give it to. Enjoy my friend.

• 
  @LGKustoms2 күн бұрын

  Thanks again!

• 
  @waynespyker57314 күн бұрын

  I'm not a valance fan but you nailed it! I prefer the stock 32 frame frame horns, full radiator grille and chin exposed with only a spreader bar. But the internal openings were partially boxed so all is good. What is the mounting hole spacing for cast aluminum club plaques?

• 
  @pamdunn84544 күн бұрын

  i saw you bending the panel over the vice stand you might want to add brackets and a 1 1/2 - 2 inch length of pipe "top to bottom" for a panel bending anvil ?

• 
  @gkanderson924 күн бұрын

  Nice finishing touch. Great solution on mounting following customers guide lines. Lux now has a good start on his t-shirt collection. I hope he has an LG speed and custom.

• 
  @brentmclovin93324 күн бұрын

  How much was the backing plates chrome job? It’s a beautiful car!

• 
  @LGKustoms2 күн бұрын

  I think it was around $500 to chrome them

• 
  @geoffrycolyer134 күн бұрын

  Great work adds a nice look to finish off the front with the rear

• 
  @bruceedgecomb87224 күн бұрын

  keep up the great work

• 
  @PeterHatch-mx7zc4 күн бұрын

  😁👍

• 
  @PeterHatch-mx7zc2 күн бұрын

  No worries👍

• 
  @36oldsaussiecoupe5 күн бұрын

  Gday I have been watching your 32 build from the pick up at Karl’s, great job i have enjoyed the build so far imensly, I am from Melbourne in oz, we have to have our cars engineered and then we can put on the road. So you guys are lucky our system is very strict

• 
  @joshuastacy23715 күн бұрын

  Link to the wiper kit?

• 
  @LGKustoms4 күн бұрын

  I bought it off marketplace

• 
  @RustyOlive5 күн бұрын

  Did you find a 6v horn? I have a 6v Klaxon for ya.

• 
  @LGKustoms4 күн бұрын

  I did at last weekend swap meet! Thanks

• 
  @qwiked7 күн бұрын

  Wiper episode was entertaining. Trailer build? Yes..(btw was that Jim Isherwood’s trailer?)..if you close the shop will you U Tube your adventures from the road?

• 
  @LGKustoms7 күн бұрын

  I bought the trailer from Ryan Isherwood. And I’m not closing the shop anytime soon haha. Unfortunately I still have to work for a living

• 
  @justinweaver81078 күн бұрын

  I run that excat oil in my 50.

• 
  @steverives30608 күн бұрын

  Turn the carb around.....linkage will line up

• 
  @LGKustoms7 күн бұрын

  But then the throttle shaft would be backwards.

• 
  @steverives30606 күн бұрын

  @@LGKustoms Apparently thats what a lot of Mercury guys are doing.....If you pull from the bottom of the linkage it may work to open throttle blades

• 
  @georgepalm23078 күн бұрын

  Prefer the shop. So cool.

• 
  @MidwestCoupe8 күн бұрын

  Please do more upholstery videos

• 
  @LGKustoms7 күн бұрын

  I’ll have more coming up in the future when I upholster my 32 sedan.

• 
  @Pete_Hot_Rod_Rocker8 күн бұрын

  Nice job on the wiper setup, I look forward to watching vids on the trailer build. I’ll see you at the Old Time Drags

• 
  @LGKustoms7 күн бұрын

  See ya there!

• 
  @johndavidson49749 күн бұрын

  Definitely interested in the trailer build.

• 
  @paulsturtz76389 күн бұрын

  Film it all, everything you do is interesting and educational.

• 
  @bruceedgecomb87229 күн бұрын

  trailer NO

• 
  @bruceedgecomb87229 күн бұрын

  pretty crafty

• 
  @CathySalmon-vw3vs9 күн бұрын

  Another informative video. Always learning from you.

• 
  @LGKustoms7 күн бұрын

  Glad to hear it!

• 
  @darrenbrisson43369 күн бұрын

  That's the dream lee if I won the lottery I'd buy a beautiful motorhome and hit every event going n.h.r.a , nascar, no prep events car shows no land taxes to pay no property to maintain just your motorhome with your trailer with your toys in it like a mini garage I'd see every n.h.r.a national event sprinkling in Nascar events and car shows do the big shows pebble beach, etc etc

• 
  @LGKustoms7 күн бұрын

  Sounds like a great retirement plan

• 
  @stuartmorton30839 күн бұрын

  I need to slow my project down, right after I figure out how to something you put out a video. Just finishing up the wiring on my 29 REO you put out the wiring videos, just figured out the windshield wiper the same as yours I got the kit from speedway you put out a video on it 😂. Any good ideas on side exhaust mufflers that look good but quiet it down. It has headers off a 454 then down to the side, just need to make it drivable and not go deaf until I have the money to do an exhaust system.

• 
  @LGKustoms7 күн бұрын

  Haha I’ll be doing exhaust videos on my 32 soon. Probably sometime in August…