I never thought I'd find a video more informative than an actual review. I am beyond thankful for this content! Especially since you're doing so much more than selling product to an audience. This channel NEEDS more recognition.
@rollerskateuniverse6763
20 күн бұрын
@@littlebigplanet17 thank you I appreciate it
@user-rp4hq2sf5u5 ай бұрын
Great information, and well presented. Can I suggest you improve your camera work. Your picture only displays on about ( 1/9th ) 11 percent of the screen and is very hard to see, especially the smaller parts you are talking about.
@rollerskateuniverse6763
5 ай бұрын
Thank you
@ukfieldninja87305 ай бұрын
Also can use graphite from a pencil, graphite is a "solid" lubricant on the parts/areas which will wear down by friction and can't use a liquid lubricant on.
@rollerskateuniverse6763
20 күн бұрын
@@ukfieldninja8730 genius idea
@ukfieldninja8730
20 күн бұрын
@rollerskateuniverse6763 I've been using my platinum plates a lot and there are some scuffs from the delrin but no "edge" has formed. Can't get those shims but the graphite seems to be doing the trick 👍👊
@Jazor50 Жыл бұрын
I just want to adopt your skills from this video 👏🏾 great video.
@racharina Жыл бұрын
what is the difference between all the butterfly colors? Right now, mine have the yellow butterflies and they are soft; however, they seem to make my skates not to pivot. I want them to pivot more, what color should I use?
@jasondank86532 жыл бұрын
your really helpful just like marshal
@ukfieldninja87305 ай бұрын
If ya watching this and can't get those shims... same effect can be achieved using a thin PTFE sheet and cutting out little discs the same diameter as the axis pin sleeve. Ptfe sheet costs like.. $2 for more that you'd even need
@kjwilliamson47506 ай бұрын
So I have an size 11 edea boot with size 7 Arius plate not mounted yet. Would my plate be to small for my boot? Before I got my Arius plate, I was skating on a cheap nylon plate size 7 and skated on them just fine. I had little to no knowlege about my actual plate size measurement but skating on a size 7 plate has done me well. I’m almost 3 years in and just now upgrading to a better plate!
@rollerskateuniverse6763
6 ай бұрын
As long as the wheelbase on the new one is relatively close to what you're running now, there shouldn't be any issues!
@louisefournier50222 жыл бұрын
Hi can you put the link up for the seller of theses trucks pls? Thanks!
@rollerskateuniverse6763
2 жыл бұрын
He's on Facebook, his name is Marshall Mort
@JohnTewell-yh2se2 ай бұрын
You bought these used for sure.... New ones come in a custom box with all the tools and extra cousions...
@rollerskateuniverse6763
2 ай бұрын
I bought nothing , these were sent to demo the aftermarket parts on them, and then they were sent back to the owner
@michaels51662 жыл бұрын
and you have skills...
@deefootwork_2 жыл бұрын
Can’t find his Facebook? What is it?
@rollerskateuniverse6763
2 жыл бұрын
Check out the page "arius skate plates and cushion trading"
@turner79282 жыл бұрын
Dude, get a pocketknife
@AdowTatep21 күн бұрын
Im sorry man but why did you put a horizontal video, in vertical, with these blurs on the top/bottom. Instead of just making a normal youtube horizontal video. We're on youtube not tiktok. The actual video is taking 10% of the screen size, and your video is _already_ filmed horizontally. So why don't just put it like normal
@rollerskateuniverse6763
20 күн бұрын
@AdowTatep I appreciate it, learning the stuff about making videos isn't exactly my forte versus knowing the equipment... Fortunately, I have learned how to film the stuff correctly as of late, thanks for watching!
Пікірлер: 23
I never thought I'd find a video more informative than an actual review. I am beyond thankful for this content! Especially since you're doing so much more than selling product to an audience. This channel NEEDS more recognition.
@rollerskateuniverse6763
20 күн бұрын
@@littlebigplanet17 thank you I appreciate it
Great information, and well presented. Can I suggest you improve your camera work. Your picture only displays on about ( 1/9th ) 11 percent of the screen and is very hard to see, especially the smaller parts you are talking about.
@rollerskateuniverse6763
5 ай бұрын
Thank you
Also can use graphite from a pencil, graphite is a "solid" lubricant on the parts/areas which will wear down by friction and can't use a liquid lubricant on.
@rollerskateuniverse6763
20 күн бұрын
@@ukfieldninja8730 genius idea
@ukfieldninja8730
20 күн бұрын
@rollerskateuniverse6763 I've been using my platinum plates a lot and there are some scuffs from the delrin but no "edge" has formed. Can't get those shims but the graphite seems to be doing the trick 👍👊
I just want to adopt your skills from this video 👏🏾 great video.
what is the difference between all the butterfly colors? Right now, mine have the yellow butterflies and they are soft; however, they seem to make my skates not to pivot. I want them to pivot more, what color should I use?
your really helpful just like marshal
If ya watching this and can't get those shims... same effect can be achieved using a thin PTFE sheet and cutting out little discs the same diameter as the axis pin sleeve. Ptfe sheet costs like.. $2 for more that you'd even need
So I have an size 11 edea boot with size 7 Arius plate not mounted yet. Would my plate be to small for my boot? Before I got my Arius plate, I was skating on a cheap nylon plate size 7 and skated on them just fine. I had little to no knowlege about my actual plate size measurement but skating on a size 7 plate has done me well. I’m almost 3 years in and just now upgrading to a better plate!
@rollerskateuniverse6763
6 ай бұрын
As long as the wheelbase on the new one is relatively close to what you're running now, there shouldn't be any issues!
Hi can you put the link up for the seller of theses trucks pls? Thanks!
@rollerskateuniverse6763
2 жыл бұрын
He's on Facebook, his name is Marshall Mort
You bought these used for sure.... New ones come in a custom box with all the tools and extra cousions...
@rollerskateuniverse6763
2 ай бұрын
I bought nothing , these were sent to demo the aftermarket parts on them, and then they were sent back to the owner
and you have skills...
Can’t find his Facebook? What is it?
@rollerskateuniverse6763
2 жыл бұрын
Check out the page "arius skate plates and cushion trading"
Dude, get a pocketknife
Im sorry man but why did you put a horizontal video, in vertical, with these blurs on the top/bottom. Instead of just making a normal youtube horizontal video. We're on youtube not tiktok. The actual video is taking 10% of the screen size, and your video is _already_ filmed horizontally. So why don't just put it like normal
@rollerskateuniverse6763
20 күн бұрын
@AdowTatep I appreciate it, learning the stuff about making videos isn't exactly my forte versus knowing the equipment... Fortunately, I have learned how to film the stuff correctly as of late, thanks for watching!