Check out our newest video on the expanding rubber stem casters for Commercial Prep Tables! A lot of new upgraded features on these casters compared to when we released this video. 😃kzread.info/dash/bejne/ipp2scaAnbiae5s.html

Very helpful. Thank you.

@CasterHQ

10 күн бұрын

Glad it was helpful!

Thank you Jordan. I've been stressing for weeks trying to understand how to do this. I've got a stainless prep table for grilling and the rubber stems keep coming out and table tips over with everything on it. You are the man!

Very helpful. Well done. Thank you.

Just got a stainless steel kitchen table for my pizza oven. It came with no instructions. (Thanks China, not). So thanks for this Jason and thanks KZread for helping me find it. It was the maybe the 5th video I've watched. I didn't know about these expanding rubber stem casters but that's what I have.

Actually, this was super helpful! Thank you 😊

@CasterHQ

4 жыл бұрын

I'm so glad!

excellent video thanks

Wow..thank you….❤

great video , thank you . What is the music ?

For a visual tutorial please visit our Blog that has step by step instructions with photos using the link below. www.casterhq.com/Expanding-Rubber-Stem-Installation-Guide-s/469.htm

@NewsNowFortWorth

3 жыл бұрын

what about square aluminum tubing?

Great video! I want to use these on my telescope tripod. It looks like it will adjust to tripod angle but do you see any issues and or solution? Thanks

Hi Sir. I need urgent advice on how to install a caster in a 10mm square tubing? It is for my parrot cage and I cannot take my birds out - not an option. Which casters can I use? Can I use a wall anchor ? Any other advice, please? Thanks

Do you have something that would work with the “VEVOR Stainless Steel Equipment Grill Stand, 36 x 30 x 24 Inches Stainless Table?” It has legs with a near 2 inch diameter, so many reviews complaining that the typical 1.5 diameter stems are too small.

Hi, how to remove the expanding stem casters from a stainless still tube. Thx.

I’ve the Cheap 6-tier metal rolling cart from Walmart. I’d like to break metal cart down into 6 individual shelves, each with casters. The metal tubing is 3/4 inch diameter. Do U have 3/4 inch caster sleeves? (caster length is 1-1/2 inch. But length isn’t important)

I just got a set of 4 for a work table two have brakes should the breaks go on the back,front, or kiddie corner?

Why is there a spacer? I assume to add space but for what reason?

@CasterHQ

5 ай бұрын

The spacer in our expanding stem casters ensures the expanding rubber adapter is slightly elevated, filling any gap at the stem's top. This positioning is crucial; it allows the adapter to sit just below the knurled nut, facilitating full threading onto the stem during assembly. Without the spacer, if the rubber adapter were longer, it would

1:41 Shows the physical product and what you should receive when you receive your product as well as the installation if you want to skip directly to it.

i want to add wheels to my table, but it has hallow square legs, not cylindrical tubes, can i use expander adapters for it? the table is from ikea, called påhl

@CasterHQ

3 жыл бұрын

Yes if you can measure the inner diameter of the legs tubing I can send you a link for some expandable rubber casters that should fit your ikea table.

I need a rubber expanding stem for a hollow table leg thats 1-3/4”. Cant find that size on ur page but maybe i am not looking in the right place

@CasterHQ

3 жыл бұрын

We do offer 1-3/4" expanding rubber stems but we do not have them listed in our website. Please email us at info@casterhq.com or call us at 844-439-4335 and we can help you out. Thanks.

What is the amount of play at the bearing raceway ? The tighter the tolerance the less wobble my work branch will have. I have researched almost 15 mo for a solution to the slop that’s designed in ( or allowed ) at the bearing raceway which cases the work bench to move while performing work. I need a min of 2 swivels in order to move the work bench . But it’s the swivel design that’s causing my issue. We can send people to the moon but can’t engineer a bearing raceway with zero tolerance. Frustrating , Se’an 1/15/24

what about square aluminum tubing? if your company doesnt have it can you recommend ?

@CasterHQ

3 жыл бұрын

Hello, So from experience we stopped making square expandable adapters becuase they do not spread out properly and would still fall out of the tubing. The best adapters to use in square tubing are in fact the round adapters as shown in this video. If you need any help feel free to call us 844-439-4335 Mon-Fri between 8am-5pm. Visit our website www.casterhq.com or email us for more info at info@casterhq.com Thanks for your interest.

Hi, do you think if you tightened just the swivel bearing raceway of the table (with griddle on top ) would work casters themselves loose? Somebody installed them for me and only tightened that without tightening the hexnut under raceway. Now I can see alittle gap on one side of the caster SBR and the expanding rubber. Do you the Hex definitely needs to be tightened? Thank you

@CasterHQ

2 жыл бұрын

Hi Peter, great question! Yes you can tighten and un-tighten the expandable rubber adapter once it is inserted into the tubing by just turning the swivel raceway. I need to make a real demonstration video as there are a couple different techniques that can be used to do this. Thanks for watching.

@SandwichesRule

2 жыл бұрын

@@CasterHQ Thank you for replying. It’s crazy I spent a good amount of money on six new casters , they the table with the grill on it with a pump Jack but now it looks like the casters are angled again and I’m afraid to move the table. I wish I could send you a pic.

Hi sir , Does this work with IKEA viki adil white legs ?

@CasterHQ

3 жыл бұрын

I’m not sure the inner diameter of the tubing on your IKEA legs. We do have a lot of options when it comes to our expanding rubber adapters to choose from. I’m sure we will be able to accommodate you.

Do any of your caster sets come with 6 casters? My stainless table has 6 legs.

I take it you guys don’t sell the adapter stems by themselves without having to purchase the whole wheel?

@CasterHQ

3 жыл бұрын

We actually can sell you the expanding adapter kits separately but you would need to reach out on a weekday to us. Mon-Fri 8am-5pm (cst). 844-439-4334. Thank you!

Do you have an online shop? , I'm an interested buyer. I'm from philippines.

@CasterHQ

2 жыл бұрын

Hello, yes we do. www.CasterHQ.com

What about square tubing?

@CasterHQ

2 жыл бұрын

The round expanding adapters work better in square tubing compared to any square adapters that are found on the market. This is due to the square adapters not expanding properly and fully inside the tubing in which a round tubing expands and holds much better in square tubing. I recommend just using the round tubing adapters inside your square tubing.

What ate the prices?

@CasterHQ

Жыл бұрын

Checkout our link here and you can see all sizes available in the expanding stems we offer as well as wheel options and diameters. www.casterhq.com/ExpansionStem-s/172.htm

Good video,,,,,,, Normally when i like and Sub. they send me a 5 dollar check in the mail on the 1st of the month , Since this month is almost over you can wait till May ....😎