When threaded T-nuts with prongs come loose or fall off after installing them in furniture like chair legs, there are a few solutions and precautions to take into consideration: ⚫Add Adhesive: For added security, apply a strong wood adhesive or epoxy in the hole before inserting the T-nut. This helps to lock the T-nut in place within the wood. ⚫Use a Screw: Hammer the T-nut into place and then secure it with a small hinge screw in the center of the cross shape to prevent it from backing out or rotating. 🔴We did not use these methods in the video but highly recommend both to ensure the t-nuts stay in place and that you are a happy customer.

There are a couple of issues here, the most important one bing that the casters put a lot of torque on the endgrain of a quite thin piece of wood. Granted, the total weight of the person sitting is distributed over all four of them but still, in time the legs may split. Also i wonder why you were using a masonry bit to drill wood. 😊

@CasterHQ

2 ай бұрын

These drill bits were the only ones I had to use at the time of the video 😂 🤦 When threaded T-nuts with prongs come loose or fall off after installing them in furniture like chair legs, there are a few solutions and precautions to take into consideration: ⚫Add Adhesive: For added security, apply a strong wood adhesive or epoxy in the hole before inserting the T-nut. This helps to lock the T-nut in place within the wood. ⚫Use a Screw: Hammer the T-nut into place and then secure it with a small hinge screw in the center of the cross shape to prevent it from backing out or rotating. 🔴We did not use these methods in the video but highly recommend both to ensure the t-nuts stay in place and that you are a happy customer.