Fantastic video. Answered all my questions.

This is awesome. Invaluable information. Thanks for making this!

427 rwhp completely stock baseline is really good. These cars typically baseline around 400 rwhp but the power can vary by car! I’m jealous!!

@kevindutter9068

Жыл бұрын

I think it has to do with it being a stick car, less drivetrain loss

@michaelcalvert9743

Жыл бұрын

​@@kevindutter9068 the manual typically dyno 400-405. The auto are around 375-380. 427 stock in this video would mean this car only had 6.15% drivetrain loss.

@jerzey22

Жыл бұрын

@@kevindutter9068 nope it’s the dyno setting. STD is standard when they should be testing in SAE

@JussDraftfr

8 ай бұрын

thats cap. its 400 whp for the 2016+ ss lmaoo @@michaelcalvert9743

@al151

3 ай бұрын

Guys. Cars read different on dynos, don’t hang up on the numbers but the delta gain. Here the dyno is using Standard Correction not SAE. So it is a 400 whp car on an accurate dyno. What sucks about it is you are paying $$$ for 36 whp gain. Not worth it. You need to add cam setup or go supercharger route.

Very pleased new subscriber here. Your video is thoughtful, informative and intelligent. No clickbait, yelling, bad acting, fake excitement or dumb jokes. A professional type of serious but not boring. My son just bought a 2018 Mustang GT and I hope you do a similar bolt-on comparison for that. Thanks.

Got the same stuff done to my gto with the ls2

This made more power than the 5.0 and scatpack with the same mods. Hell yeah!

@mr.eastcoastgrow6132

Жыл бұрын

My brother has a scat and my cousin has a 5.0. I have a Fifty edition Camaro and I'm faster than both. The scat can give me a run up in 100mph range but that's it. The mustangs actually a dog.

@Hauser03

Жыл бұрын

@@mr.eastcoastgrow6132what year 5.0?

@ZZ-ed6wp

2 ай бұрын

No it doesn’t, the mach1 they dynoed put down 500hp to the tire with headers and e85

Did I see the stock strut brace on AFTER the new intake was installed?

Curious! Ive seen other videos with lower baseline, installing same items ( cold air intake, intake manifold, long tube headers) making 500+ whp.

@Highlander1432

2 ай бұрын

Yeah with E85 flex tune

Baseline on the SS is impressive but not entirely unexpected. I was a little surprised that the mods didn’t add more power. Watching the same mods occur on a 5.0 is very interesting. But they are certainly very different engines. What do the baselines on a Dodge look like?

What kind of power do you think a nice aggressive cam bored 30 over and stroked. I know this is a terrible question, but I just bought a 2020 2ss. Any guesses would be great! Thanks

@BMEmarc

Жыл бұрын

In my opinion probably 550+ rwhp

@Game-The-System

7 ай бұрын

​@@BMEmarcThat​ must be assuming all the other bolt-ons installed first, right?

Hi, how much would it cost to bolt ons Camaro?

Might be a silly question, but did you guys do a tune after each mod before testing, or did you just bolt em on and go?

@JussDraftfr

11 ай бұрын

its fbo. no need for a tune

@muskytuned

11 ай бұрын

@@JussDraftfr :30 It was stated it was tuned at each stage. It's a big misconception that just bolting on parts gives you gains. All of these parts need a proper calibration. That rotofab intake changes the maf scaling and requires a tune. Same goes for the intake manifold and throttle body. The headers are a little more forgiving but definately need a tune to optimize the gains.

@JussDraftfr

11 ай бұрын

@@muskytuned hmm, ok I stand corrected. You’re right

@staychiefinangelito5084

9 ай бұрын

10 hp each item don’t seem right

Did you have to recalibrate the air-fuel and timing for these new parts, who are you tune from .Excellent gain.😊

@Highlander1432

2 ай бұрын

Of course

Hi buddy I see a mopar in the back lol Iam a dodge guy but ready to eather get a challenger scat 2020 or 2021 or go Chevy ya I know Chevy a ton lighter not as much comfort but liability witch one would you get and would be for fun

@rdgsupafli

Жыл бұрын

If u want to more comfort and be gay like mopar because of rappers get the mama 4 door soccer car. If you want speed reliability and excellent handling and fun factor get a Camaro ss or zl1

Did you need to do a tune after all the bolt ons? I have the same car and I'm going to purchase the same

@blakececil4905

2 ай бұрын

Yeah after any modification you should tune otherwise you could be losing power

How would you compare the msd to the c8 manifold

@mike88wt

4 ай бұрын

If you stay bolt on get the lt2 ported. Msd can’t beat me and im stick. If you cam then go ahead and do msd

Would y’all tune a 2018 V6 3.6 liter Camaro Rs ? Or only V8s

Just get a flex fuel sensor and tune and call it a day. That's 30whp right there easy for cheap

@pb24dagrk

Жыл бұрын

The 6rwhp gain was with the tune. Most gains are.

do these high flow catalytic converters pass emissions in new york?

No e85?

At no time is the engine tune shown as a gain. Was this motor not tuned for these pulls? How much did it add and when in this process?

@Highlander1432

2 ай бұрын

Lol Tune is required for all these mods or you'll get an Xmas tree of lights on your dash and car won't run well

@Highlander1432

2 ай бұрын

We've entered the times of labor and tuning costing twice what the parts do. What are these laborers going to do when a machine can do all the work at 1/50th the cost ?

Why no e85?

I wonder how much e85 would add. I'm thinking around 20 hp.

@al151

Жыл бұрын

Most likely. But you can get a flex tune and dial in for both pump gas and e85.

@guerrero12009

Жыл бұрын

For me it gave me 30 more HP just on e85

@pb24dagrk

Жыл бұрын

I gained 35rwhp over my 91 octane baseline

@TheJMan1K

Жыл бұрын

@@pb24dagrkwhat parts? And was anything else added when you went to E?

@pb24dagrk

Жыл бұрын

@@TheJMan1K e85 was my first mod :)

So about 480 wheel with e85 FBO for a Camaro. Not bad

For a fraction of the price, you can install a modified LT2 intake and get 90% of the gains.

Was this tuned after each modification?

@Lucas22748

Жыл бұрын

I 100% bet it was. Otherwise it would run like shit

@JussDraftfr

11 ай бұрын

@@Lucas22748 doubt it, mine dont and others dont get a tune for fbo

@Zilla17707

11 ай бұрын

Yeah u can bolt on all of these mods on a stock camaro without a tube and you won’t see more than 5 if any hp gain plus your car would run like crap. They 100 percent tuned the car after installing the mods

Probably needed a tune right?

This stage three package is what, $1000? I don’t see much more value than that power wise.

Part number for the spark plugs ?

@NationalSpeedInc

Жыл бұрын

NGK LTR6IX-11.

@zl1_antt468

Жыл бұрын

@@NationalSpeedInc thank you !

@ellisdaniels1796

Жыл бұрын

Would I need spark plugs for fbo

@PrismIsAPuck

Жыл бұрын

@@ellisdaniels1796 no

Is this rwhp or Engine hp.

@JussDraftfr

11 ай бұрын

its on a dyno, u can see the wheel spins bro lol its whp

It is really hard to beat gm.

I’m starting to regret the LT1 platform. You need to spend a lot to get peanuts for gains damn man . I’m trying to hit 650 HP to the wheel

Dang it’s a factory freak lol

@al151

Жыл бұрын

Every dyno reads different. If you put another stock and it puts less power and torque on the same day running same gas then you can say that.

@Sneaky5.sl0w.

Жыл бұрын

Happy dyno

@jerzey22

Жыл бұрын

Nope no such thing in this day and age. They tested in STD not SAE

The downside is having to waste 4k on AFM delete kit if you got a A8/10 trans.

Flex fuel kit

Funny how some people test rotofabs with rwhp gain, while others see no gain at all vs a stock intake. Can't help but wonder who is right and who is wrong?

@Clutch_Kick187

Жыл бұрын

Close the hood and there is no gain.. You don't drive down the road with your hood up..

@super8mate

Жыл бұрын

@@Clutch_Kick187 yeah, it’s for noise and looks. CAI gains alone are barely measurable.

@jerzey22

Жыл бұрын

@@Clutch_Kick187 correct!! No one tests CAI correctly they all do this hood open crap to sell parts

Cool now test it with the hood closed and set the dyno in SAE 😂

@TorqueMachine

Жыл бұрын

They lost all credibility when I saw that. They even had a fan blowing air towards it...

@MasterCarguy44-pk2dq

10 ай бұрын

Any dyno with hood open adds,12-18 hp and does NOT reflect actual driving, but rather, in a parking lot meet or gathering, sitting there.

@MasterCarguy44-pk2dq

10 ай бұрын

Never trust ANY speed shop when they use STD and open hood. If you do, deduct 15-20hp.

@jameswhitesell3076

10 ай бұрын

​@@TorqueMachineyou have to to simulate moving

@yummyhershey5902

8 ай бұрын

@@jameswhitesell3076he's talking about blowing air into an open hood. No one drives with an open hood, however I'm not sure how much hp that's really worth in this case

Close that hood first. People do not cruise around with the hood wide open to cool their engines so dont dyno it that way.

All at work and all that money for 54 horsepower more not sure if all that money was worth it 5700 hund to get 54 horsepower more

Too much money for less than 10% gains. I'd say either get a little happy gas or a blower instead.

WTF! RTV on an MLS exhaust manifold gasket?! That is just plain stupid.

They didnt close the hood. Thats cheating by keeping engine cool.

@Game-The-System

7 ай бұрын

My educated guess is that this is a trade-off. While there might be some added cooling effect from the hood being open (especially with the fans blowing), you also likely lose some of the compressive effect of the air being forced into the engine bay (and the intake).

427 rwhp??? Not on a trock car, no way. These have been around 380 to 405.

@DullerCrab

10 ай бұрын

Every dyno result I’ve seen bone stock reads around 425+ rwhp, it’s no lie

@jameswhitesell3076

10 ай бұрын

Every dyno is different, and there are different correction settings

I have something to say…… MOPAR baby let’s go Mopar or no car. 10 days and counting

Mustang makes 3HP less with a smaller motor!

@hunnterful1

11 ай бұрын

Mustangs are twice the size of this LT1

@hunnterful1

11 ай бұрын

Mustangs have 32 valves 😂

@poopinator22

11 ай бұрын

@@hunnterful1 WOOOOOW someone clearly doesn't know jack shit about engines SMH

@DullerCrab

10 ай бұрын

@@poopinator22The 5.0L Coyote in the Mustang makes similar power with a smaller displacement, but has 32 valves and 4 camshafts to make up that difference (the LT1 only has 16 valves and 1 camshaft). It’s not rocket science or anything, they make their power in their own ways, larger displacement vs a more complicated engine. I could argue that the Z06 Corvette that makes 670hp out of a 5.5L engine is so much better than 5.0L Coyote, but that’s just a dumb argument

@Game-The-System

7 ай бұрын

Another drawback of all those valves and cams on the upper engine that is often overlooked is where the weight is located. All other things being even, I'll gladly take a slightly larger engine with a lower weight distribution than one where a large portion of the weight is located higher. Handling matters.