My GOD!!!! I don't have a Morningstar but I have been searching for a video on HOW TO CONTROL THE H9 Via MIDI ! I'm using a HELIX as the controller, and this video FINALLY made things exceptionally clear! Thank you so much, MORNINGSTAR!!! I Completely understood EVERYTHING inan 8 minute video. Most videos go on and on and on 30-45min video with midi over USB, onnecting to a DAW blah blah etc. You have delivered a perfect, clear, precise explanation on using the H9 with an actual midi cable plugged into a good midi controller with a much needed explanation on the H9s, once, mysterious midi inner workings! Its all very simple now !!!You jave unlocked the H9 for me, and its F-ing AWESOME!!!!! Again thankyou.I will absolutely pick up a Morningstar to control my smaller travel rig !!

Hi. You can also use the MC 6 to switch effects on and off within the Spacetime algorithms. CC 23 =Mod level, CC 25 = Reverb level and CC 28 = delay level . Use the virtual faders to set the level. Using this basically gives you a pedal board.

I’m so close to jumping in. H9 and Blue Sky have opened the “oh that’s why” portal. Thanks a lot for the edu.

That message Slider window is awesome.

Finally! Thank you for this! This was much needed. I think more videos like this with other “popular” pedals that would benefit using a morningstar unit should also happen. Just a thought cuz this vid is way over do and lots of help. Thank you again!

@stephendouglas9423

3 жыл бұрын

For Real! Not enough stuff like this.

My MC3 arrives on Monday... can't wait. 😁

Thanks for this. I spent all week figuring out 85% of this myself... ;-)

pleaaasee!! teach me how to setup the waveform to use it as a Whamny my H9+Mc3

Can you please show the MC6 with the new Eventide Tricerachorus Pedal?

Hi! Can you do a midi tutorial with the Poly Beebo?

Morningstar controller and Boss 500 series, please!🔥🙂

@ovrholofficial

3 жыл бұрын

Yes please 🙏

could you please cover Poly Beebo? and Zoia? (Beebo first, though) thanks xoxoxo

Awesome! May I know what brand of midi cable is that?

@MorningstarEngineering

3 жыл бұрын

Hi! That's One Control's MIDI Hammer. We did a MIDI cable shootout review here if you are interested: www.morningstarfx.com/post/the-midi-cable-review

hi, I have a question: can this MC6 send a 'play/start' message on akai MPC one? I know it can send 'stop' and 'play' message. but what I need is a "play/start" message so that the sequence returns to its beginning and plays without any latency when the pedal is pressed.

@MorningstarEngineering

2 жыл бұрын

Hi. Yes, our MIDI controllers can send MMC messages - morningstarengineering.atlassian.net/wiki/spaces/MMS/pages/181698784/MIDI+Type+Glossary#MIDI-MMC For further assistance, please send us an email at ‘help@morningstarfx.com’. We provide technical support from there. A service ticket will be created for you and we will be able to follow up easily.

Nice! Can Cross Midi Thru work on other devices like the Helix HXFX or Stomp?

@MorningstarEngineering

3 жыл бұрын

Yes, it works for all devices. It simply relays MIDI messages that a Morningstar controller receives via USB out through its MIDI out ports.

Good explanation but can you turn on and off to use multiple effects at the same time using the midi foot switch?

@MorningstarEngineering

11 ай бұрын

Hi. The H9 can only run one effect at a time. If you need more than that, the H90 will allow you to run 2 effects at once.

@MarsGuitarOfficial

11 ай бұрын

@@MorningstarEngineering thank you 🙏

I just bought an MC6 because of this video (had so much trouble figuring out my last midi footswitch, I ended up selling it). I would love to be able to not just select the preset using the MC6 but activate the H9 with 1 foot tap (tapping the same MC6 footswitch would turn the pedal off). Can this be done? Perhaps I could hack it by creating a preset that is just a tiny amount of reverb so the H9 is always on but I'm just using it to control presents...

@MorningstarEngineering

Жыл бұрын

Hi! Please send us an email at ‘help@morningstarfx.com’. We provide technical support from there. A service ticket will be created for you and we will be able to follow up easily.

so you can set 2 buttons for up and down and another 4 for 4 favorites pre sets? for example? or 1 for tuner and 3 for favorite effects?

@MorningstarEngineering

2 жыл бұрын

Hi. Yes, every switch is independently customizable to send any MIDI messages you want.

@wences71

2 жыл бұрын

@@MorningstarEngineering Thank you so much!

How can I connect the H9 and MC8? I have the H9 midi setting Thru and I tried the whole PC messages and it won't recall any presets from my H9 to MC8. Help please.

@MorningstarEngineering

3 жыл бұрын

Hi. Please send us an email at help@morningstarfx.com. We provide technical support from there. A service ticket will be created for you and we will be able to follow up easily. Cheers!

Excuse me, may I ask a question...... I Want to use more than one effect, can it ? For example usding delay and tremolo and reverb at the same time. Thanks (and sorry for my poor English)

@MorningstarEngineering

2 жыл бұрын

Hi. The H9 functions as one effect at a time only.

@Polarisfff

Жыл бұрын

Thats not correct. One Algorithmus at one time. Spacetime has for example one Algorithmus with delays, Modulation and reverb, I think. So, search a Algorithmus with the effects and customize it.

How to reset the MC6 back to default factory settings?

@MorningstarEngineering

3 жыл бұрын

Hi. You can reset the MC6 from the global configuration menu. Explained in the manual here: morningstarengineering.atlassian.net/wiki/spaces/MMS/pages/753729538/MC6+MkII+User+Manual+firmware+3.8#Global-Settings

@PhilDoughty

3 жыл бұрын

@@MorningstarEngineering Thank you