You didn’t even drink it but you said, “amazing”. 😂

Nice review. I received my La Marzocco Micra and Eureka Mignon Libra last week. I have yet to bypass the FH error - 0g of coffee ground so far. I am using the Micra's portafilter with double-spout attachment as you do in the video. I have gone through the calibration process multiple times. It refuses to accept it. Very frustrating.

Does the Libra grinder work with a 54 mm bottomless portafilter

Hi. Did I hear you say that they might be bring out a Libra with a large burr size?

I have a Profitec Pro 400 and from what I read I cannot use a Naked Portafilter because it just don’t fit. Any thoughts?

Hello, I want to use a dosing cup ? Is there any suitable cup for the libra ? Or it just for a single dose grinder ? Please elaborate with a link 🎉

What’s your setting for espresso?

Just purchased through I drink coffee along with a Micra. Question, to adjust the grind setting do you have the machine grinding while you turn the knob?

@eurekagrinders9555

7 ай бұрын

Hi @JasonCummins-ks9jf, thank you for your interest in our Mignon Libra. To adjust its grind setting toward the “fine” end, the machine must be grinding to prevent blockages. This is because as you go finer, the burrs go nearer each other and, if the motor is not on, coffee beans may remain trapped inside the small place between the burrs. On the other hand, to adjust the grind setting toward the “coarse” end, the machine can be off. Greetings from Florence! Eureka

Thanks for the vid. One issue: should always use the funnel that comes with this unit as this is very helpful to reduce the grinding spray on the unit and table. NOTA: This machine does have issue with measuring if the portafilter isn't balanced on the scale / cradle. An "FH" will appear on display if PF is not level on it. This means "Filter Holder" and you have to take the PF out the cradle and wait 5 secs and then place back in and hit the grind level on the display. It's finicky but I hate measuring out so this is easy but temperamental grinder.

@johnboulanger807

8 ай бұрын

100% agree with using the funnel; I also found FH errors less common since I started using the Libra funnel.

Thank you! On my side, I hope a next version of this mill with the 65mm burrs, there I crack even if the 55mm are good performances. Ha… the Linea Micra!!!❤

@iDrinkCoffeeCanada

Жыл бұрын

There will be one later this spring with 65mm burrs.

@paul_vlad

Жыл бұрын

@@iDrinkCoffeeCanada which product line?

@iDrinkCoffeeCanada

Жыл бұрын

@@paul_vlad It will be part of the Eureka Oro line, I don't have full details yet but it's coming.

@back_to_the_bike8820

Жыл бұрын

@@iDrinkCoffeeCanada Thank you for your answer. Since I'm not interested in the speed, only in the cup result, do you think there is a real gain in cup with the 65mm burrs rather than the 55mm burrs from eureka? this question because obviously the price is not the same (I only drink espresso from a Rocket Appartamento)

@BlackShadow2009

11 ай бұрын

@@iDrinkCoffeeCanadaSpring is already over and its summer now. Where did you get that information? Is there a new updated ETA?

Hi, I have a Linea Micra. I’m looking for a new grinder. Does the Libra work okay with the Linea Micra portafilter without the plastic double spout attached? I prefer to use a bottomless portafilter. Thank you.

@iDrinkCoffeeCanada

Жыл бұрын

Yes, you can adjust the height of the portafilter to fit the bottomless. I do really like the pairing.

Besides grinding for espresso coffee, does it provide, on the other end of the scale, a coarse enough grindfing for a "moka" type coffee brewer?

@iDrinkCoffeeCanada

Жыл бұрын

Hi, I would not recommend this grinder for other types of the grinding. The forks are designed to fit a portafilter and grind for espresso. If you are looking for a more all around grinder there are other choices like the Mahlkonig X54.

Ah this is awesome, my only concern with some of the higher-priced Eurekas is that the base is basically the same as the cheapest Crono (the motor, the burrs) for around $300 and then you're paying $700+ for features like quieter grinding and grind by weight, which means that the outcome (grind quality and consistency) will be pretty much the same. Would love to see this feature on their "upgraded" matching with larger burrs like Stark.

@slawekjanicki

Жыл бұрын

This is coming in the spring, there will be a grind by weight grinder in the Oro line.

@okc4029

Жыл бұрын

I got the middle range with the Silenzio and its amazing! I dont regret it at all as the higher are really pricey for the same product but with digital screen. However, the fact that the grinder settings won’t be lose after dissembling for cleaning is quite useful 😅

@iDrinkCoffeeCanada

Жыл бұрын

I agree that is a very nice feature.

@reyavalon

Жыл бұрын

@@slawekjanicki does it come with active fan cooling with heavy duty usage?

@iDrinkCoffeeCanada

Жыл бұрын

@@reyavalon Hi, no this is a home grinder so it is not designed for heavy usage. If you are looking for a commercial grinder with grind by weight I would suggest checking out the Mahlkonig E65s GBW or the E80 GBW.

Does not it support dosing cup like other grinder ?

@slawekjanicki

Жыл бұрын

This grinder is designed to grind directly into a portafilter.

The only improvement that I was waiting is to have a tight air hopper for my EM specialita

@iDrinkCoffeeCanada

Жыл бұрын

That's a good idea, I'll make this suggestion to Eureka.

@motopasky

Жыл бұрын

You could design a hopper with an airtight lid, but air will still get in from underneath through the shute, so I am not sure how beneficial it will be.

can you use this with a porta filter funnel?

@iDrinkCoffeeCanada

Жыл бұрын

Eureka has a portafilter funnel that is specifically designed for the Libra which we will have in stock in a few weeks.

Can it be used commercially or is it for home only? I currently have a fiorenzato SR64OD EVO but it is poor!

@iDrinkCoffeeCanada

Жыл бұрын

Hi, this grinder is designed for home use. It is not suitable for a commercial application. For a commercial grind by weight grinder I recommend the Mahlkonig E65s GBW or the E80s GBW

how is the retention?

@iDrinkCoffeeCanada

Жыл бұрын

The retention on the Mignon series is quite low, I would say a gram or less.

Americano vs long black... it's a topic for a whole different video.

Libra means pound in Spanish and probably in Italian too . I don't think It's because of the astrological signs 🤷‍♂️.

@iDrinkCoffeeCanada

Жыл бұрын

I think this is all related. In Italian the word pound is Libbra but they chose the English spelling. The 7th astrological sign Libra is Bilancia in Italian; that translates to balance which is another word for scale.

@unsharted_territory

Жыл бұрын

@@iDrinkCoffeeCanada interesting

@leexid

11 ай бұрын

They def wanted to focus on the scale part of this and we aren't dosing a lbs of coffee into extractions.