A very informative video. Thanks for sharing.

👍Thank you Dred! Your videos are best for me. Short and without any useless information.

👍👍👍👍👍

Definitely the Godfather of airbrushing👍 the first tip no1 really helped me as I had no idea. The tip regarding paint mixes with some not liking water is a great help too. Another tip from Warrick at H&S is to uncouple the airline from both the brush and compressor after the days spraying and hang over door or similar. This allows the air left in the hose to fully escape rather than forming moisture and spitting next time you use it. Looking forward to tomorrows vid.

Gracias amigo muy muy buenos consejos saludos desde México ⭐⭐⭐⭐⭐

Rob you are a great teacher, and the only one I listen to about airbrushing anymore. Thank you, and I am looking forward to your next video.

@dredfxcustompaint

14 күн бұрын

Thank you so much for that I would definitely recommend the art work shop 👌

The best airbrush holder I ever used: Two big-head nails, about an inch apart, driven halfway into the side of my drafting table. Exactly the right height. Easy to control angle of rest. Very sturdy. Even when I bumped into the brush, it never plummeted to the floor. Works well for gravity feed, siphon feed and side feed.

Great Tips! Mukka Dred!! Thicker more air! Thinner less air! Now I keep paints as thin as inks and maybe more! 👊🏽👍🏽😎

Thank You for the tips. I have an Iwata hp-c plus and the trigger has been sticky from new. As it was my first brush, I thought it was normal, I dropped some lube down the hole, but it didn't improve. It still sticks a bit but I am getting used to it now. I thought it could be a swollen o-ring.

4 months in I have learned some of this through experience - not always pleasant - a great set of tips thank you. Also thanks for the recommendations on kit.

@dredfxcustompaint

14 күн бұрын

Your welcome glad your enjoying your airbrush journey 👍

👊👌

Good video👍

Rob, great tips, thanks. In regard to air pressure, keep in mind there is always a pressure drop from the regulator on the compressor to end of the air hose. Usually the longer the hose and the more fittings and turns in the air distribution line, the more the pressure drop, so if you set 25psi set at the compressor you can loose 5 to 8 psi or even more. I like to set the compressor a good 10psi more than I need and fine tune it with the MAC valve at the airbrush. Just something to consider.

@dredfxcustompaint

14 күн бұрын

👍

Getting a main line air pressure regulator really did the trick for me. It is a must have if you ask me

What a great video, thanks for this mate! Learned a bunch from this!

@dredfxcustompaint

13 күн бұрын

Your welcome glad you enjoyed it 👍

Some very useful tips there Rob these are essential for the beginner👏👌looking forward to tomorrows beginners video👍

@dredfxcustompaint

13 күн бұрын

Hi John hope your good mate 👍 thanks for always coming back and showing support with the channel much appreciated The video is up now

@JohnWD40TC02

13 күн бұрын

Yeah all good here Rob just busy as always, I like to support you where I can but I'm sorry if I don't watch all your longer videos mate I don't always get the time😠but I still love your channel👌👍

Looking forward to tomorrow's video.

@dredfxcustompaint

14 күн бұрын

Nice one 👍

Come on people subscribe mr Dred should have a lot more followers for sure, I thank you so much you explain things perfectly and I'm not just saying it coz I'm leaving a comment but you are my n°1 airbrush artist I've only been airbrushing for about 6 months am loving it and my artistic level b4 airbrushing is at least minus 100. Once again many thanks for what your doing for people like me really 😁😁🙏

@dredfxcustompaint

13 күн бұрын

Thank you so much for that really appreciate it 👍

😊😊 brilliant Rob thanks yet again brushes are precision tools and have to be cleaned and looked after same with ya bigger guns 😊😊😊

@jc2200

14 күн бұрын

That devilbiss is self clean mukka Dean! 😜🤪

@deanbrown7643

14 күн бұрын

​@@jc2200yeah yet to find a gun that cleans itself 🤣🤣🤣🤣🤣🤣

@jc2200

14 күн бұрын

@@deanbrown7643😂😂😂 really the one you sent it cleans itself 😮😮😮

@deanbrown7643

14 күн бұрын

@@jc2200 you must have yourself a gun cleaning fairy then cause mine dont 🤣🤣🤣🤣

@jc2200

14 күн бұрын

@@deanbrown7643I’m guessing it must be a godsend

Great tips!

@dredfxcustompaint

13 күн бұрын

Glad you liked it 👍

Great tips, thanks for sharing. In your other videos you talk about using isopropyl for thinning, would you recommend the same 1:1 ratio on that?

@dredfxcustompaint

14 күн бұрын

Hi after using the isopropyl alcohol I would go more than one to one definitely

@Drestudios

13 күн бұрын

@@dredfxcustompaint appreciate it, will give it a shot

Great tips sir. Quick question. Evo or Micron for best results. Not concerned about price. Thank you

@dredfxcustompaint

14 күн бұрын

Wait for the new infinity it's out very soon 👍

Mukka you forgot tip number 6 ,Never Ever eat yellow snow 🤣🤣🤣🤣🤣🤣🤣

@dredfxcustompaint

13 күн бұрын

See everyone d brown has to lower the tone 🙄 but he is right tip 6 was don't eat yellow snow or yellow paint 😉

@deanbrown7643

13 күн бұрын

@@dredfxcustompaint council life mukka say it as it is 😃😃