Erics Guitar Garage,Here Eric installs the binding on # 12 The Blues Master.
Жүктеу.....
Пікірлер: 42
@MusicStudent110 жыл бұрын
Great demonstration, thank you for posting this! I want to build a custom Gibson guitar inspired bass with white binding and I was wondering how binding was done! Thanks again!
@ericcellini23211 жыл бұрын
Hi Matthew the bearing size is a matched fit with the binding bit. It only routs about a 1/16" of an inch in to perfectly match the binding. Both of which were purchased from Stewart McDonald on line.
@TheColodrummer8 жыл бұрын
Gotta sharpen those bits, my man. haha.
@buzzcrushtrendkill2 жыл бұрын
He used SciGrip #16 (Weld on 16) solvent - type acrylic cement. Would have been nice to have told the viewers in between telling viewers how great a cement it is..
@BrickMovieProduction10 жыл бұрын
If you would rebind a body, would you first take off the paint, replace the existing binding and then repaint? Thanks
@ManGobio7 жыл бұрын
Hi Eric. Thanks for the video. I am really curious about two things. What is the size of the router bit bearing and what kind of glue do you use? Thats because I heard your comment where you said the glue mixes with plastic...meaning its a good glue. Thank you in advance for your support.
@muymalo76516 жыл бұрын
what type of milling cutter do you use?
@Deathstroke14009 жыл бұрын
and also how would i paint the guitar? do i bind it then paint useing tape or paint then bind(i am not staining it i am painting it a solid color. plz help your advice would be appreciated!
@ranman586353 жыл бұрын
Doing a comparison of videos. How people put binding on. At the factory they use band's that take months to comprehend how to wrap. I saw another guy that was a home builder like you and he started at the neck and went around. He fumbled a lot and I didn't like his technique because he kept leaving it too loose and having to go back many time's. You started at the bottom and that left you no seam. I think he could learn some things from you. Starting at the bottom seems to have also given you a better starting point.
@brucesancan14593 жыл бұрын
Hey Eric, Thanks for the video. What is the glue you are using? You mentioned having a custom bridge made. Where can I get one of them? Peace
@matthewlittle868211 жыл бұрын
Hi what bearing size did you use on the 1/4 rabbiting bit ?
@Deathstroke14009 жыл бұрын
what brand/type of cement did u use?
@buzzcrushtrendkill
2 жыл бұрын
SciGrip #16 (Weld on 16) solvent - type acrylic cement
@lesblack41310 күн бұрын
Need to get a tripod to hold the camera mate!!
@mistershankley10 жыл бұрын
What's the glue you used Eric. I just used superglue
@buzzcrushtrendkill
2 жыл бұрын
SciGrip #16 (Weld on 16) solvent - type acrylic cement
@barrygelber927510 жыл бұрын
What kind of adhesive are you using?
@SuperLeddie
5 жыл бұрын
methyl acetate. ie, UHU glue or loctite all purpose adhesive extra strong, both the same glue.
@buzzcrushtrendkill
2 жыл бұрын
SciGrip #16 (Weld on 16) solvent - type acrylic cement
@Thomasdgolden7 жыл бұрын
Eric, great videos...have you done set necks, like studio Lester's? (Meaning upgrading a studio with a set neck to install binding on an older studio.). I just did a nice Goldtop upgrade and was considering putting binding on the body to enhance the look.
@32dollarpickup77
7 жыл бұрын
Hi Tommy, sorry for the late reply! I haven't built any Lester's. I basically like to come with my own designs. I am partial to build a Telecaster now & then though! Take care!
@Ducesweden6 жыл бұрын
What type of glue do you use?
@buzzcrushtrendkill
2 жыл бұрын
SciGrip #16 (Weld on 16) solvent - type acrylic cement
@spaixe69695 жыл бұрын
Does it matter wich glue you are using, or can you just take any glue you want?
@buzzcrushtrendkill
2 жыл бұрын
SciGrip #16 (Weld on 16) solvent - type acrylic cement
@34672rr5 жыл бұрын
why put binding on a nice piece of wood? for looks? dent protection?
@danialm81223 жыл бұрын
What kind of glue is that?
@buzzcrushtrendkill
2 жыл бұрын
SciGrip #16 (Weld on 16) solvent - type acrylic cement
@yabailoberta123410 жыл бұрын
Sorry man, Where do I find that plastic? ahm home depot? :)
@Kevin-wg2cd
10 жыл бұрын
Stewmac.com! They have everything you'd need
@nicoraibak9 жыл бұрын
whats the binding made of?
@ericcellini232
9 жыл бұрын
ABS PLASTIC.
@nicoraibak
9 жыл бұрын
Where can I get it?
@Doctordendro
9 жыл бұрын
Edwin Fire Google it there are heaps of suppliers such as stewmac and ebay.
@bradleybrown83995 жыл бұрын
Perhaps while you are demonstrating how noisy your router is, you could edit out that sound and replace it with a bit of information about the router bit you use, and how you set the depth to make the binding channel
@Pinstriped51203 жыл бұрын
New bit or a bigger better router , you'd eliminate that burn...
@mochnawawi93162 жыл бұрын
Apa itu kayu mahogani
@dmhguitars12254 жыл бұрын
Don't glue it just use acetone and it will glue itself to the wood !! No mess
@cartonflesh99616 жыл бұрын
"If it ain't tight it ain't right." That's what she said.
@whittaboi3 жыл бұрын
strange that you would clean the channel, then proceed to sand something right next to it! I'm joking of course great building.
Пікірлер: 42
Great demonstration, thank you for posting this! I want to build a custom Gibson guitar inspired bass with white binding and I was wondering how binding was done! Thanks again!
Hi Matthew the bearing size is a matched fit with the binding bit. It only routs about a 1/16" of an inch in to perfectly match the binding. Both of which were purchased from Stewart McDonald on line.
Gotta sharpen those bits, my man. haha.
He used SciGrip #16 (Weld on 16) solvent - type acrylic cement. Would have been nice to have told the viewers in between telling viewers how great a cement it is..
If you would rebind a body, would you first take off the paint, replace the existing binding and then repaint? Thanks
Hi Eric. Thanks for the video. I am really curious about two things. What is the size of the router bit bearing and what kind of glue do you use? Thats because I heard your comment where you said the glue mixes with plastic...meaning its a good glue. Thank you in advance for your support.
what type of milling cutter do you use?
and also how would i paint the guitar? do i bind it then paint useing tape or paint then bind(i am not staining it i am painting it a solid color. plz help your advice would be appreciated!
Doing a comparison of videos. How people put binding on. At the factory they use band's that take months to comprehend how to wrap. I saw another guy that was a home builder like you and he started at the neck and went around. He fumbled a lot and I didn't like his technique because he kept leaving it too loose and having to go back many time's. You started at the bottom and that left you no seam. I think he could learn some things from you. Starting at the bottom seems to have also given you a better starting point.
Hey Eric, Thanks for the video. What is the glue you are using? You mentioned having a custom bridge made. Where can I get one of them? Peace
Hi what bearing size did you use on the 1/4 rabbiting bit ?
what brand/type of cement did u use?
@buzzcrushtrendkill
2 жыл бұрын
SciGrip #16 (Weld on 16) solvent - type acrylic cement
Need to get a tripod to hold the camera mate!!
What's the glue you used Eric. I just used superglue
@buzzcrushtrendkill
2 жыл бұрын
SciGrip #16 (Weld on 16) solvent - type acrylic cement
What kind of adhesive are you using?
@SuperLeddie
5 жыл бұрын
methyl acetate. ie, UHU glue or loctite all purpose adhesive extra strong, both the same glue.
@buzzcrushtrendkill
2 жыл бұрын
SciGrip #16 (Weld on 16) solvent - type acrylic cement
Eric, great videos...have you done set necks, like studio Lester's? (Meaning upgrading a studio with a set neck to install binding on an older studio.). I just did a nice Goldtop upgrade and was considering putting binding on the body to enhance the look.
@32dollarpickup77
7 жыл бұрын
Hi Tommy, sorry for the late reply! I haven't built any Lester's. I basically like to come with my own designs. I am partial to build a Telecaster now & then though! Take care!
What type of glue do you use?
@buzzcrushtrendkill
2 жыл бұрын
SciGrip #16 (Weld on 16) solvent - type acrylic cement
Does it matter wich glue you are using, or can you just take any glue you want?
@buzzcrushtrendkill
2 жыл бұрын
SciGrip #16 (Weld on 16) solvent - type acrylic cement
why put binding on a nice piece of wood? for looks? dent protection?
What kind of glue is that?
@buzzcrushtrendkill
2 жыл бұрын
SciGrip #16 (Weld on 16) solvent - type acrylic cement
Sorry man, Where do I find that plastic? ahm home depot? :)
@Kevin-wg2cd
10 жыл бұрын
Stewmac.com! They have everything you'd need
whats the binding made of?
@ericcellini232
9 жыл бұрын
ABS PLASTIC.
@nicoraibak
9 жыл бұрын
Where can I get it?
@Doctordendro
9 жыл бұрын
Edwin Fire Google it there are heaps of suppliers such as stewmac and ebay.
Perhaps while you are demonstrating how noisy your router is, you could edit out that sound and replace it with a bit of information about the router bit you use, and how you set the depth to make the binding channel
New bit or a bigger better router , you'd eliminate that burn...
Apa itu kayu mahogani
Don't glue it just use acetone and it will glue itself to the wood !! No mess
"If it ain't tight it ain't right." That's what she said.
strange that you would clean the channel, then proceed to sand something right next to it! I'm joking of course great building.
Turn the music off