Watch the Complete ONE TON Build Series: ** Episode #1: DANA 60 AND STERLING 10.5 BREAKDOWN: kzread.info/dash/bejne/aIGgu8-BaMjFdLw.html ** Episode #2: REMOVING DANA30: kzread.info/dash/bejne/h6Whu6WpccK9ktY.html ** Episode #3: REMOVING LOWER CONTROL ARM MOUNTS: kzread.info/dash/bejne/c4112NapopXFddI.html ** Watch the Grey Goat Walkaround (Prior to One ton Build): kzread.info/dash/bejne/eKGVw7uRpZrVhrQ.html

Good Morning Bug, As per your request, at 11 my uncle taught me to ARC weld discs and plow blades that had cracked. Later I learned to MIG weld repairing tractors and my first off road truck. With my AG license at 12 came my first pickup, an older farm truck passed down to me with a whole lotta problems. I caught you folks wheelin with MORR and enjoyed your husband's attitude as Matt guided him. Putting confidence in anyone can be difficult but he stepped up, followed direction and got through some tough obstacles. Of course folks (men) watch your channel, some of us for the off roading and all of us for the Beautiful blond Joe is fortunate to have. My current project is a 87 Ford 3/4 ton pickup getting a new engine to replace the gas hound 460. I also have an 87 Goldwing that I am having to make my own brake lines for. No one makes stainless steel replacements for these old bikes so that is holding up my rebuild of the forks and brakes. I am hoping and praying your husband is getting better. Health in a relationship is important, when one is down the whole family can get down also and that can slow recovery. You are in my prayers Hoka Hey

The Goat is looking awesome Bug.That clip of you loosing the tire was😂😂😂

@GoatOffroad

2 жыл бұрын

Thank you Dan!!! Thought I’d share my embarrassment with you 😂

1977 in high school. Started with Arc welding. Mig after. Tig many years later, still need more time with Tig

@GoatOffroad

2 жыл бұрын

That’s awesome!! Welding is such a fun skill if you practice. I too need more time under the gun but Josh is so good at it. I’ll just let him do it 😂

GOAT Off Road Tire Recovery Team!! That did not look fun at all, and I feel for yall having to battle those Black Berry Vines and Bushes. I am really impressed with all the reinforcement plates yall got. I wish they made kits like that for my clapped out Dodges. I wouldn't worry at all about the weld through primer, The factory uses seam sealer all over the place on vehicles and since yall are using under coating it will be more than fine. Very impressed with Josh's welding skills. Welding vertical and on your back is no joke! I learned to weld with a Arc Welder welding junk iron on my off road trucks haha. Great job yall! The GOAT is coming together nicely and will be a beast on the trail!!!!

@GoatOffroad

2 жыл бұрын

Recovery team back at it!!! One tire at a time 😂 It was actually kinda fun The frame stiffeners were a must, especially when we saw the crack in the frame. Also the Goat was in a front-end wreck before we got it so the frame is crinkled. The stiffeners are nice but a pain to install! Time consuming! But now the axles are done so the fun stuff can begin! Can’t wait to reveal the secrets I’ve been keeping!!! They’re good one!!! Thank you for always watching and commenting!!!! ❤️🐞

Good job on the tire recovery Bug! Josh killed it on the frame stiffeners! Glad y'all are feeling better!

@GoatOffroad

2 жыл бұрын

Thank you! The tire recovery was actually fun 😂 Josh is an incredible welder! We’re lucky to have him on board! And yes, Thank You! Finally feeling 💯 again!!! We plan to wheel with y’all when this is done!! Planning for a September visit! 🥰🐞

Bug,your better than Vana White revealing the letters! Don't get mad Joe,your awesome too! A real knight in shining armor,making those steps for your lady like that. Glad your both feeling better and back at it!😉❤💯

@GoatOffroad

2 жыл бұрын

Thank you!!! Joe says that too! Just like in welding- being in front of a camera takes practice 😂 I’ll let Joe operate the equipment and I’ll tell the camera all about it

I learned stick welding on the farm when I was 12, from my neighbor. Tig welding in the early 00's, to rebuild my square body 79 Chevy P/up. I would recommend renting a plasma cutter to anyone doing any serious metal work on any type of vehicle. It's just so clean, and great edges.

@GoatOffroad

2 жыл бұрын

Hey Benny! That’s awesome that a neighbor taught you at 12. Great trade to have but especially on a farm. We’ve always wanted a plasma cutter. But Josh wanted a fire wrench and he found a great deal on it. He’s really good at it too 👍

@bennyboogenheimer4553

2 жыл бұрын

@@GoatOffroad Yeah, it was funny he was working in his shop, and would ask, "You sure you're getting that right?" Which I was in fact NOT, So I asked how he knew? (since he was no where near me) He said I can still hear you working, When you're "Makin' Bacon" (the sound of good stick welding) you're Golden. When you sound like a bird in a box window fan, you're just making chicken shit that won't hold. He said when you weld with your ears, as well as your eyes, you'll always do great things. I mean he screamed at me a lot to. This wasn't a Kung Fu, Master/Grasshopper moment. He did want things perfect. Which I totally got. It had his name on the bills. After a day or so, I was laying down perfect line, and when tested the weld held, were the metal tore. In the 70's Adults tried harder. Plus there wasn't Nintendo or Snapchat to distract my ADHD mind. lol! It was ride a bike, work next door, ride a bike, swim in a cold pond, ride, go home when the automatic lights came on. Tell my folks about my day, TV, and sleep. Next day same thing. And it was GREAT!!! Oh and all the Coke I could drink, when welding. From an old 1930's Coke machine, so icy cold! lol!

Retrieval of the tire was hilarious. Thanks for sharing. Awesome work being done on the goat!

@GoatOffroad

2 жыл бұрын

Thank you Gary!!! Thought you might enjoy the tire escapade!!! 😂 Thanks for watching and commenting!! ❤️🐞

Getting stronger 💪 and better everyday 👍

@GoatOffroad

2 жыл бұрын

Feels good!!! 🙌

I learned how to weld to fix my Xj's floors and put my carpet back in. I hope to do the samw 1 ton sawp in the next year or two and I began welding because of paul from fabs rats. Thanks for the videos.

@GoatOffroad

2 жыл бұрын

That’s awesome!! FabRats and the entire gang in Utah are fun to watch! We still need to install the carpet on our daughter’s XJ. But we did the rust repair. I’ll release a video on that one day. Once you learn to weld, you can do anything!!!

Hate missing all this!! I’ve been sick for weeks now and unfortunately I can’t stay home and get better. Too many jobs going on right now. But, Bug and Josh are doing a great job!

@GoatOffroad

2 жыл бұрын

It’s not the same without you!! But the fun is just getting started! You only missed frame stiffeners 😂

Learned to weld in high school been welding now 12 years. One of the best trades to know in my opinion. Just subscribed by the way as well. Just starting to build my xj so this is aweome for me thank you keep up the awsome work 👍👊

@GoatOffroad

2 жыл бұрын

Hey Nick!!! That’s awesome that welding is taught in high school. Such a cool trade to have because you can do so much with it! Thank you for subscribing and have fun with the build! Keep me updated! 🥰Bug

Got a good chuckle out of the amount of effort it took to get that tire back lol

@GoatOffroad

2 жыл бұрын

Those blackberries are no joke. That would’ve been a much bigger job without the excavator. We made it fun and got it done! 🙌

Bug I'm so glad you both are feeling better now and the video was awesome and glad to see you and Josh

@GoatOffroad

2 жыл бұрын

Thank you Alan! Hope you’re doing well! Joe and I are back feeling 💯! Need to get him to Josh’s garage this weekend so you’ll see him in the videos 😂

@alanseys95

2 жыл бұрын

@@GoatOffroad You're very very welcome sweet bug and I'm doing really good and yeah that will be cool to see Joe and tell him I said hi and bug if you want too say something about what I have told you what I need help with on my truck and maybe someone can help me out from your channel that live near by me and I live in Franklin NC western North Carolina y'all

i learned to weld at a great job i had in oklahoma building ground unit oil rig equipment(monstrosities)but still do not consider myself a "pro welder".sorry about the"whoops"moments but hey it's a part of life,builds character and helps us learn what not to do(if we remember next time,lol)thanks for the videos see ya later

@GoatOffroad

2 жыл бұрын

Mistakes are valuable lessons! If we learn 😂

LOL That tire was SOOOOOO eager to go offroading it decided to not wait for the Jeep. LOL

@GoatOffroad

2 жыл бұрын

It was 😂 It said, “I’m first!” 😂

@Uncle_Yukon

2 жыл бұрын

@@GoatOffroad Are you sure it didn't say: "Catch me if you can!" ? LOL

How are you my friend, your work today is fun, the new tires are really excellent

@GoatOffroad

2 жыл бұрын

Thank you! I’m very well. Hope you are doing well too. Have a good day! Thank you for watching and commenting!! ❤️🐞Bug

Hi bug and jhosh,wow that is a lot of work real jeepers do real mods lol. It will be awesome when the job is finish. Im realy enjoying the comtent=👍

@GoatOffroad

2 жыл бұрын

Thank you Jamie!!! Josh is very talented and has worked on many Jeeps. We’re lucky to have him help us with this build

I do mig, Tig, not great at stick because I just don't use it started in 2009. I started at a welding school not the big name school in Oklahoma

@GoatOffroad

2 жыл бұрын

That’s awesome! Welding is such a fun trade - it allows you to do so much! Thank you for commenting!! ❤️🐞

Great Work Bug Good Job 👍👍👍

@GoatOffroad

2 жыл бұрын

Thank you!! 🤗

Josh is the man!

@GoatOffroad

Жыл бұрын

He’s very talented 💯

Tire recovery.. one got away 👇 .. I like that other Jeep xj in the yard 👉 💯

@GoatOffroad

2 жыл бұрын

That’s our daughter’s’93 XJ. We’re doing rust repair and a carpet install. We’ll upload a video when it’s done 👍

really great looking welds, the goat is going to be awesome when job is done!

@GoatOffroad

2 жыл бұрын

Those were beautiful welds!!! So excited to get the Goat done!!!

Tig and stick. I weld naval nuclear building stuff for the US Navy

@GoatOffroad

2 жыл бұрын

That’s so cool!! Thank you for your service 🥰 Where are you stationed?

@bobbruce4543

2 жыл бұрын

@@GoatOffroad I'm not not in the military anymore. I was in the army years ago but work for a government contractor

Hope you two are feeling fine now.

@GoatOffroad

2 жыл бұрын

We’re feeling better 💯! Thank you for checking on us 🤗❤️

Man I hated that weld through primer doing my frame stiffeners. I guess practice is key. Made my welds all look like crap. If you search for Jody from Welding Tips and Tricks, he is how I learned to Tig. Mig I just self taught.

@GoatOffroad

2 жыл бұрын

Josh said he’s had trouble with primer before. But this brand didn’t give him any issues 👍

@crashtke

2 жыл бұрын

@@GoatOffroad good to know for future modifications!

Nice welding, can he share the settings of the welder thanks

Haha, black berries are the devil!

@GoatOffroad

Жыл бұрын

It was a battle 😂

When y’all coming back? Hope everyone is okay?

Did you weld the full perimeter?

👍👍👍😊😊😊😊

@GoatOffroad

Жыл бұрын

😊😊

Did you weld the full perimeter?