I’ve had my Valiant for a couple of months and it has never been out of the box. I’ll make sure to double check that mount before I fly it. I very much appreciate you sharing this information. I always learn a little something from each of your posts. Thanks a bunch!

@FatGuyFliesRC

4 жыл бұрын

Thats the reason I post . If my experiance with these planes helps then this great hobby benifits. Thanks for watching!!

Great video! I glued my motor mount back onto the Valiant and I'm waiting on a prop adapter to get her back up in the air. I use the white gorilla glue and it works great. I checked after the plane had set for 24 hours and the blue head cured and found no movement at all, but the true test will be in the next flight. Love your Channel! I should be making a new video on the Valiant after the fix early next week. Have a wonderful evening and happy flying!

@FatGuyFliesRC

4 жыл бұрын

Thanks so much and you too!

Good video, very informative. Thx so much.

@FatGuyFliesRC

16 күн бұрын

Glad it was helpful!

Thanks for the video buddy! My Valiant still hasn't arrived, but i will be checking it before assembly!

@FatGuyFliesRC

4 жыл бұрын

Glad I could help!

I got the same problem after using the plane a few times. A loud vibration coming from the motor in high rpm motor speeds. I thought it is because a faulti motor shaft or prop adapter but I gues this is the reason. I checked the front structure of the motor mount and it is totally loose. I glued the area and hopefully it works fine again. Thanks for sharing man. I appriciate.

@FatGuyFliesRC

10 ай бұрын

Hope it helped you!

@emre563

10 ай бұрын

@@FatGuyFliesRC It worked very well 😉. Thanks for sharing 🙏

Enjoyed checking out your aircraft hangers. Nice design.

@FatGuyFliesRC

4 жыл бұрын

The idea was to get them off the floor and to where I could easily grab one and replace one. Thanks for watching!

Great practical àdvice. I'll check mine.

@FatGuyFliesRC

8 ай бұрын

it is not all Valiants just a few.

@geofkane2365

8 ай бұрын

Sadly, bro, on my maiden, I flew her in F mode without knowing and I crashed and broke the nose off! I glued her together, and with Safe mode on I flung her into a 15mph wind and she flew fine.

Thanks I just got one, haven’t flown it yet. I’m going to check it right now. Thanks again. Have a great day. ⭐️⭐️⭐️⭐️⭐️

@FatGuyFliesRC

3 жыл бұрын

Thanks, you too! Glad you watched this video. I would hate for your Valiant bee 150ft up and the motor detach from the fuse!!

SO glad I discovered THIS video! I just checked mine. I'm 👍! Thank you sir! U have a new subscriber!

@FatGuyFliesRC

3 жыл бұрын

Awesome, thank you! And i subded back. Support each other I say!

Just got my new Valiant and then saw a bunch of videos besides this one where the nose broke right off! I have taken matters into my own hands before I even fly it. I drilled (5) 1/8" x 3" long holes through the outside area of the plastic bulkhead and into the foam behind it being careful not pop out the sides (not at the top because the foam wall is too thin there). Then I filled the holes with epoxy using a thin stick and covered the 1/8" x 3" long flat head bolts with epoxy and inserted them into the holes. This is certainly overkill, but having that nose pop off is now the last thing on my mind.

@FatGuyFliesRC

3 жыл бұрын

Like i said in the video its hit and miss on the shipments, my first valiant (still have and fly) not a moments issue with the nose. Second one I got(with the intention as using the first as a back up ) had the vibration issue early on. Thankfully I heard it and landed immediately , took her back to the shop and fixed her for good. FYI I subdued to you. If you have not subded to me please do. And weather you sub to me or not Thanks for watching and if you have any RC Plane questions please ask that's why I made this channel.

I am aware of this problem. As I have more flights on this plane by far than any other plane in my hanger, and no real crashes, and I often fly it with a 4S 1800, I fequently check to make sure the motor is tight. So far no issues.

@FatGuyFliesRC

Жыл бұрын

I am on my third Valiant and it was my 2nd one that had this issue. But it is a easy fix but best to just be aware of it and check when you get a new one or periodically on the present one.

Good advice thanks

@FatGuyFliesRC

4 жыл бұрын

Glad it was helpful!

Well presented and too good to see your hangar bro. The bad news is that the model shop I ordered this Valiant from have sent a message 'Out of Stock' & refunded. It is discontinued here in Australia & not available. Over $100 to ship from the USA plus would take forever until flights get back to normality....ah well hoping now for the T28 1.2

@FatGuyFliesRC

4 жыл бұрын

Dangit!!! Man I wish you could have gotten one!!!

Thanks bud! Will glue it before my first flight.

@FatGuyFliesRC

3 жыл бұрын

Even if your Valiant is not one of the defective ones it will not hurt. Its a great precaution!

The same thing happened to my Commander mPd...started vibrating then the cowling and engine fell off during a takeoff. Luckily it was an easy fix but I learned a hard lesson.

@FatGuyFliesRC

4 жыл бұрын

Better on the ground than in the air!!

Excellent video!!! This is a great plane!!

@FatGuyFliesRC

4 жыл бұрын

Do me a favor a find the link yo where you repaired your valiant and I will plug that link into this discribtion. I mentioned you in this video since you also had the same problem.

@LoveRC

4 жыл бұрын

@@FatGuyFliesRC it's this video. I had let my buddy fly it and the engine got a vibration and then fell out. We fixed it at the field. He did most of the work. kzread.info/dash/bejne/fq521NNulJfFf7Q.html

@CliffHarveyRCPlanes

4 жыл бұрын

Good advice there Geoff 🙂

@FatGuyFliesRC

4 жыл бұрын

@@CliffHarveyRCPlanes Thanks so much, now if only I could go flying!!!!!

You have nice RC airplane collection!

@FatGuyFliesRC

4 жыл бұрын

Thanks so much!. Its an addiction that I dont want to be cured from...lol!!!

@jdpasl

4 жыл бұрын

@@FatGuyFliesRC You are gonna get more airplanes from stimulus LOL!

Hey big guy will you add your d/r and expo settings as well as your flap settings? I am new enough that i need the best starting point so I can fine tune from there. I'll be checking back and I just subscribed

@FatGuyFliesRC

3 жыл бұрын

Ok I only use one rate. and thats 100% throws with 30% expo. My flap settings are as follows. no flaps 50% no elevator mix....take off flaps -25% with 11%elevator....landing flaps are -100% with 22%elevator. Thats in the flap settings on my DX9 Spektrum Transmitter. Normal rule of thumbs is take off flaps should be just enough to cause the plane to rise slowly without any elevator input and landing flaps are thought of as air brakes to slow the plane down. You control the landing with throttle input and elevator to control the decent of the tail all the while using the rudder to steer the plane as she settles down.

That's the American dream for me: to own the same number of planes! 😉

@FatGuyFliesRC

4 жыл бұрын

Well my wife is an enacler!! severall of my planes she put on my radar because she heard about them before me. Now she has created a monster....lol.

@webrambler88

4 жыл бұрын

@@FatGuyFliesRC let her feed her Frankenstein now!

I would buy this plane Greg....but with my luck I would be the one out of ten with defective motor mount connection.

@FatGuyFliesRC

2 жыл бұрын

Go ahead and get it. The fix is insanely simple if you get an unlucky one.

@FatGuyFliesRC

2 жыл бұрын

The planes performance is worth the risk!

THANKS Have One

@FatGuyFliesRC

4 жыл бұрын

She is a great bird!!

Ok great...thx for the reply. How bout a Turbo Timber? Are those settings you gave for the Valiant the same or even close enough to use with the TT too with maybe just some fine tuning after the fact? The birds are very similar in stature but maybe not in flight characteristics. Again, thx for your time and opinion....

@FatGuyFliesRC

3 жыл бұрын

I use the same rates of 100/30 on the Timber as on most of my planes. However the flap settings will differ some. A lot of that depends on your flying style and the weight of the battery you use. But a good starting point is 25% for take off flaps then 100% for landing then a 2 sec deployment. Noe as far as elevator down mix then start at 5% down elevator for take off flaps and then 22% down elevator for landing flaps. Then fly and test if it still balloons to much then more down elevator mix on the elevator. And of course the opposite if she dives too much on you. Flap mixing is tricky and it will differ from model to model. There are many factors that come into play so one setting is not a universal one.

Hello FatGuyFliesRC! Very useful info in all your videos! One question: would you recommend to reinforce that area even before noticing any vibration? (during the assembly for first time) Thanks :)

@FatGuyFliesRC

4 жыл бұрын

Yes , as long as it does not change the angle or pitch of the motor mount. It does not take much dont go overboard with the glue.

@claudiomueckay4219

4 жыл бұрын

@@FatGuyFliesRC, I used the clear glue that comes with some Freewing models (the white metal tube). I wasn't sure exactly where to apply it, but finally put it around the caulking between the plastic and foam. I hope not to have that vibration issues ever. But I think that is something that I will need to check all the time before take off. Thanks for your advice. Everything looks ready for maiden now. Happy flights! :)

@FatGuyFliesRC

4 жыл бұрын

@@claudiomueckay4219 Just make that part of your preflight. Occasionally grab the prop (with motor off of course) and see if there is any give. Better to catch on the ground that 150ft up.lol!!

@claudiomueckay4219

4 жыл бұрын

@@FatGuyFliesRC ,Sure! I'll do that. Thanks, (I just noticed your T-shirt. I will show it to my wife. She'll love it too. Lol)

@FatGuyFliesRC

4 жыл бұрын

@@claudiomueckay4219 LOL thanks for watching. Yeah it gets a few comments when I wear it in public. Yes check your valiant. Better to fix on the ground then find in the air.!

I might get the Futaba Skyleaf Classic , made in Japan

@FatGuyFliesRC

3 жыл бұрын

Looks like a very fun and stable plane. I watched the build video.

What do u prefer the valiant or the FMS pa-18 (1300mm version)? I've been eyeing them both but can only get 1 for now.

@FatGuyFliesRC

Жыл бұрын

Get the Valiant first then the p1300. But get both ultimately.

Awesome video and tip. So I just purchased the Valiant yesterday for $199. And I keep hearing about this problem. So what do you recommend I should do right when I get it? Just keep shaking the front nose to see if it loosens up? Cause I want to prevent it from happening. Is it possible to open it up and put glue from the inside just to be extra safe?

@FatGuyFliesRC

3 жыл бұрын

It will not hurt to remove the prop and cowl and put a little bead of glue in and around the fire wall. Just be careful not to let any glue drip on the motor. Also I subded to you. Your snorkeling with the turtles in Maui was cool. The turtles were very cool.

@rupman27isback

3 жыл бұрын

@@FatGuyFliesRC Thanks for the response and haha..glad you enjoyed my turtles video. i post all random stuff. Enjoy

@rupman27isback

3 жыл бұрын

@@FatGuyFliesRC Another question.. what glue should I use for this plane that's safe on foam? And how should I apply it? With a small brush? Thanks

Great video thanks for the tip I have a problem with my Valiant that it loses connection when flying about 150 Meters away. I checked antennas etc, the range test fails as well any ideas please?

@FatGuyFliesRC

3 жыл бұрын

Is it the BNF? If so are the antennas 90 degrees from each other and what has changed ? when did this start? Has it passed the range test before?

@longboardlouie5816

3 жыл бұрын

thx for getting bk promptly. It may be the BNF, it started almost right away I've only flown it 3 or 4 times. Only did 1 range test recently since it happened after adjusting antennas. Ive heard the AR636A receiver has had issues, so I'm replacing it with a AR620 Sport no AS3X though.

My buddy was flying mine and we heard a vibration. Landed and the engine just rolled out. We fixed it together at the field and put her right back up. Used some epoxy and balloon mix. kzread.info/dash/bejne/fq521NNulJfFf7Q.html We had another new guy in the club have the same problem. We fixed it for him and got him back in the air.

@FatGuyFliesRC

3 жыл бұрын

Yeah about every ten have this motor mount glue problem.

I just got this plane and built it. It is my first plane with flaps. Is it normal for the flaps to make a loud noise when fully deployed? It sounds like the servo is still trying to move the flap when fully engaged. I set it up per the manual at 100% for full landing flaps.

@FatGuyFliesRC

2 жыл бұрын

Back off to 90% and see if that does not quiet down the flap servo.

@jpap1059

2 жыл бұрын

Just did it and it worked perfectly. Thanks again. This is the second time you have helped me and being new, it is greatly appreciated.

Glad I ran across this! I just got this plane as my trainer! (I'll be BUDDY boxing with a very experienced pilot)

@FatGuyFliesRC

3 жыл бұрын

She is a great birs and if you have one of these with this defect, its a simple fix. Not even worth the hassel to wait on a repaired bird from them. A little gorilla glue and your flying!! ..FYI I subded also. Nice ride!

The plane is selling well, and on sale for $199 these days.

@FatGuyFliesRC

3 жыл бұрын

The Valiant is a great all around plane. Also I subded!

@rupman27isback

3 жыл бұрын

i liked when he said the price was at $169 lol