Ebay Chinese thermostat oil sandwich plate hack
Автокөліктер мен көлік құралдары
How to fix, what is, whatever, whatever. Everything you need to know about a cheap Chinese oil filter adaptor for an oil cooler. I put a different thermostat motor (charge cylinder) in it, because the one it came with was too cold, and changed the seals to make sure they do not leak.
Disclaimer:
Due to factors beyond the control of Rust Belt Auto, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Rust Belt Auto assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this video at your own risk. Rust Belt Auto recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of Rust Belt Auto, No information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.
Пікірлер: 85
Thanks for the video. I was concerned about how the valve functions and its reliability. Your non-narcissistic manner and candid humor get 5 stars IMO.
Thank you for sharing. I also bought an Ebay oil cooler for my 2jzgte and need an oil thermostat.
"There isn't one". LMFAO!!! You made my day!!
thanks for the video and all the good infos and experiments, i must follow your channel 😁
@RustBeltAuto
6 ай бұрын
There iz a playlist of my Honda build. The installation of it is in there for all to see.
I just fitted gauges fir my rx8 got the cheap blue plate and fitted it then a new filter then started the engine and see it leaking straight away I need different oil filter so the seal fit better the m20 bolt looks like it should have a washer to help seal
Great hack!!!
About the Stan thermostat, did that also in my mod.
Wow holy moly, Dude Your are the man.
Where do you plan to mount the radiator for this?
@RustBeltAuto
3 жыл бұрын
In front of the a/c condenser probably.
Nice video
You sir!! Just made me soo much more confident in buying a cheaper thermostatic adapter!! I literally after watching this ordered the same one in red for basically same price.. i will do the same n go to a parts store and try and match the shitty 170 stat they install for a decent 195-200. Thank you!!
@RustBeltAuto
2 жыл бұрын
It looks like a Mocal knockoff. You could probably use their t-stat too. I'm just really cheap.
@anthony8787
2 жыл бұрын
@@RustBeltAuto i am too lol, the stat to me isnt worth $24
@anthony8787
2 жыл бұрын
@@RustBeltAuto theres an upgraded part number to the stat you used.. the pin was not crimped into the crown of the stat like yours was.. it looks good! I have a $7 195° stat now
Thank's for the video .you helped me a lot bro.
Hello there, I was going to buy one of these since I just realised the previous owner of my 1995. Chevy diesel truck deleted the oil cooler and just connection thru this instead of the original port on the adapter. Would you say to avoid it? Thank you
@RustBeltAuto
Жыл бұрын
I don't understand.
@blackincawston
Жыл бұрын
@@RustBeltAuto sorry I meant if you would advise to get it or avoid the product on eBay
@RustBeltAuto
Жыл бұрын
@@blackincawston I don't know how the factory one works. Does it go to a something that coolant runs through, or is it cooled by air?
@blackincawston
Жыл бұрын
@@RustBeltAuto the factory one is cooled by air believe but did you end up installing the one in the video on your vehicle?
@RustBeltAuto
Жыл бұрын
@@blackincawston yes I did. It seems to work fine. There is another video on the install on my playlist for this car. There are a few other things I did different on the thing.
very nice vid but I can’t find any thermostat that opens above 200degF…
hello I have the same problem with the leak , what kind of O ring do you use ?
@RustBeltAuto
3 жыл бұрын
Where is it leaking?
@erikmackloet6551
3 жыл бұрын
@@RustBeltAutosealing plug thermostat The original O ring is 17x2,5 mm ,its to small I think
@RustBeltAuto
3 жыл бұрын
@@erikmackloet6551 maybe tore it, or it rolled over? Is there a good chamfer on the top, so it goes in nice? Is the bore clean, round, with no grooves, or defects? I dont know what size o-ring should be in there. It should have a little tightness of fit. Just a little
@erikmackloet6551
3 жыл бұрын
everything is ok and clean. if the engine has been running for a few minutes, the oil will drip out. I really think the O ring is too small
@erikmackloet6551
3 жыл бұрын
the original ring is 17x2.5 mm. I am trying an O ring 19x2,5 mm or 18x3,5 mm
A little internal seeping past the thermostat valve is good, for sure. Let's it warm up.
@RustBeltAuto
3 жыл бұрын
OMG. KZread has these 3 rectangular things for me to pick under your comment that says "Great point! For sure! Good call!" It is soo narcissistic, and superficial, I cannot even begin to believe how this is beneficial for anyone.
@xnotx2
3 жыл бұрын
@@RustBeltAuto Oh yea, I hate those. They have them when I text on my phone. The pre determined answers are so emasculated lol
@RustBeltAuto
3 жыл бұрын
@@xnotx2 I am important! I demand positive feedback! They might as well just make it automated, so I don't have to do anything at all. Like one of those AI girlfriend apps or something.
@xnotx2
3 жыл бұрын
@@RustBeltAuto Hahaha! yep
@_entrxpy
9 ай бұрын
Let’s what warm up? It’s the opposite, it makes the oil cool down when it’s not necessary…
Few pictures of what I made and fitted
Do you have links to those parts thanks.
@RustBeltAuto
6 ай бұрын
I went on Ebay, and found the cheapest no brand Chinese stolen intillectual property I could find. Good luck.
Ive literally just received the cheap version today and thinking the same thing . Ive noticed they sell inline thermostats for the AN10 fittings but im probably gonna just order one of those thermostatic ones
Does it serve the purpose?
@RustBeltAuto
Жыл бұрын
It's working I think.
I ordered a in line 180dagree mushimoto oil thermostat £110
@elibruhim2102
2 жыл бұрын
But do u have the same oil sundwic like him?
:) i have one of those for years in my car , just put a decent oring. I pay for it i think 15€... worth it. *just remember mine has a perrin mark on it :)
10:49 LOOOOL
I hated my thermostatic switch. They end up trapping oil in the lines and you end up having lower oil pressure. I even tried adding an extra quart and it would still have less oil pressure when cold.
@RustBeltAuto
Жыл бұрын
There is probably a flow restriction. If it is not producing enough volume, the pressure will decrease.
@RustBeltAuto
Жыл бұрын
You could also have a problem with it swapping spit. If the pressure, and return is leaking together. Just a thought.
Why not just shim the spring a bit to increase the tension on the motor ? Would that have similar effects ?
@RustBeltAuto
2 жыл бұрын
No
7:38 That's a wax motor. lol
@xnotx2
3 жыл бұрын
I comment too early apparently.
@RustBeltAuto
3 жыл бұрын
HVAC guys call them that. I guess it's called a charge cylinder too.
Good shit.
Dang bro, you did a good job... I click just because it says oil cooler and as you ramble on I was like, ahh, this is good stuff. Appreciate how you set the camera, your tone of voice, and honest opinion. 🦥 ***Can't find the installation video and afterthoughts***
@RustBeltAuto
Жыл бұрын
I have a playlist of this build. My installation is there somewhere.
Is Worthing Bro ?
@RustBeltAuto
7 ай бұрын
I don't understand the question.
@ahmadiraqi6191
6 ай бұрын
Is still work good (oil cooler)@@RustBeltAuto
@RustBeltAuto
6 ай бұрын
@@ahmadiraqi6191 ya. It works just fine.
@ahmadiraqi6191
6 ай бұрын
Thanks 😊 Im from iraq In your experience, I will buy one because the weather is very hot
@RustBeltAuto
6 ай бұрын
@@ahmadiraqi6191 greetings from the arm pit of Minnesota.
Why do you sound like peter griffin
@RustBeltAuto
10 ай бұрын
I don't have an answer for that.
Cannuck Uh-boat Owt oot Uh-boat buddy ooot Uh-boat Owt oot guy
@RustBeltAuto
3 жыл бұрын
What?
What a waste of time
@RustBeltAuto
3 жыл бұрын
Such is life
Buying cheap products from China and argue about the design/quality.....What’s wrong with you 😅 Go buy U.S made products and end up with ur wallet empty
@RustBeltAuto
3 жыл бұрын
It's not just Chinese parts. I complain about everything, and buy on the cheap, when I think I can make it work, like I did here.
@garydeandeery
3 жыл бұрын
One was £15 with all the fittings and the mish one was £60 lol
@_entrxpy
11 ай бұрын
@@garydeandeerymishimoto is like 140$
You keep saying ( chinese junk, chinese crap, chinese this or that) why buying their staff. stop being racist.
@RustBeltAuto
2 жыл бұрын
Place of origin, and quality of part is not racism.