Hey guys, as many of you have pointed out I got low and 1st gear together out of order on the main shaft, I found out when I stuck it in the case, sorry I am human. I guess I can start editing out my mistakes like every other KZread channel or continue showing my mistakes and trying to correct them and be truthful.

@brucepeters508

2 жыл бұрын

WORD!!!!!

@ryanvanevery134

2 жыл бұрын

Was hoping to point it out before you got that far..lol If you haven't had something backwards or put something in out of order, or even busted something, then you've never worked on anything,..... been there a time or two! No shame in it, just that long list of swear words when you have to tear it all back apart once you realize what happened. Lots to learn for us out here watching and paying attention, and you obviously are doing a great job Warren, or else nobody would have commented on those gears and they would have sat back being "entertained". Thanks for teaching everyone a thing or four.

@gasperajdnik5627

2 жыл бұрын

Its all good buddy 👍

@brianrutherford3681

2 жыл бұрын

Hey I have done that myself when fixing things.we are all human and make mistakes.i enjoy your honesty in you leaving your mistakes in the videos.

@gasperajdnik5627

2 жыл бұрын

@@brianrutherford3681 right on mate 👍

Your videos are always a learning experience: What to do and sometimes what NOT to do. Please continue to "keep it real" you are truly appreciated.

Worked as a heavy mechanic when I was in my 20's and now I'm a desk jockey working less and making more. I miss those days though, especially the feeling you get when something pulls in completely destroyed and you get to start tearing things down, knowing how your life will be for a week or so. What I don't miss: waiting for a single part that holds up the whole repair.

Hey Warren I have been working on trucks and machines for 26 to 27 years. Mate crawling under to do clutches and gear boxes I couldn’t do with out my hoist now mate. Best investment I ever made.

Such a pleasure watching a master mechanic at work.

Love your videos man I do the same thing for a living and I love it so I'm just sitting at the house drinking beer and watching to see if I learn anything.

Don’t change a thing , I always forget what gear goes where when I take gear and shafts apart ! Nobody’s perfect !

We can all perfect the wheel when watching from a distance. An old guy told me that once. Never forgot it. Keep up the good work

It all good Warren we all make mistakes leave it in the video. That's how we learn from you. You figured it out when you were assembling the Trans. Looking forward to the next video on the transmission stay safe.

Thank you for the video Warren, I maybe late but at least it's something to look and learn forward to when at home.👍

Not a problem to be human. You always find your mistakes before damage is done. Keep up the good work And for someone starting out, these are great training videos. Most people could not do what you do and your level of expertise is phenomenal !

Don’t worry about it warren We are all human! I love watching you videos because you keep it real. I love the story times. Lol👍👍👍👍

Put a 1\8 tube into the keyway from the bottom and push the tube up from the bottom. When you get everything stacked pull out the tube out while putting in the key. Works good!

Another amazing video Warren ,thanks for sharing

great work we're all human only people that don't make mistake are the people who don't do anything keep up the good work

Main shaft is one of the only real difficult part of these trans imo. Luckily the newer series have non selective washers so they will all be the same . The older models had a selective washer design to set the gap between the gears. And for added fun they had a partial non selective shaft with a little bit of both

Thank you for the videos Mr Warren..👍

I have 55 ton press with 4x4s wedged in the bottom in place of the porta power. I worked for an excavating contractor, if the owner was out in the shop and I was pressing something that made a noise he would always jump.

Gotta have your wits about you Warren. Thanks for taking the time to make this.

Thanks for another great video, Warren!

All good Warren. Thanks for keeping it real....

I have a press similiar to that one. I took 2 5ft long 3/16" thick pieces of angle iron and welded them on each side on inside . 4 total. I drilled 1 1/8 " holes so the stop bars could go through all the holes. I also tacked a small handle on the jack release valve so i can release/tighten by hand.

Saving that customer a lot of money repairing the least broken transmission. Thanks Warren!!

Love your videos, I like to look at your work while drinking an iced sweet tea in my recliner. I worked on my share of these, now I can just watch you. Thanks for the videos, never mind the other recliner technicians, they are mostly Democrats.

Respect you using a torque wrench on the flywheel. Wouldn’t expect less from a pro. As a fleet mechanic My self with trucks lined up for clutch work. Half inch impact gets er done

Great video warren 👍. Keep Up The good work 🤝

That transmission should be pretty sweet once it’s done 👍👍

Ii enjoy your videos do to the number one that you are honest about when you goof up.we are all human and make mistakes.when I was just learning to fix diesels.i fucked up on my engine.i rebuilt the engine went perfect.but I tried to save myself money by rebuilding my own fuel pump.i thought I could do it with the cat manual I bought.i had to take the pump off and get the truck towed in town after cat got done fixing my fuck up.i had one o-ring on backwards.you now that cost me two kits and four grand to fix.

29:35 and 44:35 pause on those two spots. Those two gears look backwards. Biggest on the top, then the little synchro gear. Hopefully you catch that one before further assembly.

@westerntruckandtractorrepa1353

2 жыл бұрын

I caught it, I thought I showed it.

Thank you young man.

Thanks for the vid Warren. I like to slide my key in and then rotate my gear too lol.

Great sir 👍👍👍

you can use some 1/8" air line or whatever size runs to the range selector on the shifter to use to keep things aligned on the main shaft while you are assembling it incase you hadn't thought of that

my opinion that is what makes you channel better than the rest that are out there!!!!

We’re all human don’t worry about it warren. We all mess up don’t sweat it. Great videos! Can’t wait for my hat to arrive

Thanks Warren, The part I get intimidated by with all those gears and washers is getting them out of order between removing them and cleaning them. I used to keep a simple carbide tipped scribe so I could put numbers or letters on the up/removal side I would see first. Match marks and dots got confusing on more complex assemblies. Especially if I got side tracked. When I worked as a steel-rule die-maker we just bought those carbide scribes by the dozen, because they were like pencils in our daily work. Every place/table had 2 or 3 scribe pens on them. Would a 3/16" or 1/4" cable tie with the grip end cut off be used for that keyway pin during assembly? Just thinking about some common items laying around. I understand what it means to live out of town. When I was horse farming between 11am and 2pm was my errand times and by the time I got back I could have 150 miles on my ride, plus wheeling lunch. Ya know sometimes it sucks to work on machines and be a human being, the mind is always constantly going and the machine just sets there waiting to catch ya off guard...I think it might be an engineered conspiracy😣👻🤖👌

Well at least you are going the right way forward with it now warren 👍👍👍👍👍👍

Warren love your show keep it up. New tool new engine you might want to read the book first mistakes can set you back cash wise.

Having a good press makes a big difference, I broke numerous bottle jack style presses before I finally got a real press. I ended up getting a 80 ton press with air over hydraulic and a manual pump. One thing I learned about presses is do not buy one that bolts together, all of the better presses have fully welded frames and on the better presses the pins that hold the press bed in place go through the press bed and the upright columns so you cant spread the columns. Bolt together presses have too much side to side sway and always shift sideways when initially loading the press. Too bad you weren't closer to Southern California, I know where there is a press for sale identical to mine for $500.

good vid warren

Take care buddy thanks for sharing god bless

@gasperajdnik5627

2 жыл бұрын

Right on 👍

👍👍👍👍

I like the videos the way you show them. I like to see mistakes that way I may not make them. Keep up the good work. PS: I was wondering if you still had the B model cat engine for sale?

👍

F**ing amazing Shipmate..

@westerntruckandtractorrepa1353

2 жыл бұрын

Thanks shipmate!

If you get stuck with the pressure packs . Turn them upside down and depressurize the can then cut the can open . Won't make it spray , tou can use the contents though

Warren my friend ,I have all the timing and engine turning tools for that engine ,but they only put it in diamler products now

You need thick walled pipe to press gears on .My buddy uses pipe as big as cylinder sleeves on his press .

what makes the gears get stuck on the shafts so hard !

"Well, nothing has ever been easy for me!"

Thank God your human Warren!! I thought it was only me that that involuntary swore like a devil when I'm doing fiddley assembly and everything seems to conspire against you.Thing is I'm at the age were I don't give a shit , just get the f,,,king job done. Boy do we get worse as we get older lol. Enjoy the learning I'm getting, very interesting thanks for the effort you put in to it.

I went to Home Depot one day and found they sell Brake Cleaner almost half the price of everyone else.

@mikefightmaster

2 жыл бұрын

O'Reilly was selling Chlorinated brake cleaner for $2 . Bought a case of it. Best wasp killer I've ever seen. Drops them instantly.

@brucepeters508

2 жыл бұрын

becareful of that brake cleaner it eats up paint on cars and bikes etc

All was the bevel side of the washer goes to the slide clutch it will go in to the slide clutch

Life happens, just keep making your style vids man . commenters will comment , try to read thru them if your doing something you havent done before, Maybe the comments will be helpfull. Maybe someone else has already done what your about to do,Otherwise its all hindsight.

That barring tool should have a pin that locks it in place, that way you don’t have to use a chain.

Hey Warren was wondering if some preheat on those countershaft gears would let you install them without press???

New fangled tools confuse me too lol

Warren could fix the goddamn International Space Station!!

What program do you use on your computer.

It's all good to be human I was just worried you wouldn't find your mistakes in time.

Looks like you put the mainshaft back together different was that to get the extra gears you needed?

@westerntruckandtractorrepa1353

2 жыл бұрын

I put one gear on in the wrong order and found out when I stuck the main shaft in the case

@cyrilhudak4568

2 жыл бұрын

@@westerntruckandtractorrepa1353 Why didn't you rewind the video right there and then when you were fumbling with the washers and went to the book? They were on the table in the proper order.

@westerntruckandtractorrepa1353

2 жыл бұрын

@@cyrilhudak4568 Because I am human, we can't all be perfect like you.

@westerntruckandtractorrepa1353

2 жыл бұрын

@@cyrilhudak4568 I can start doing like every other KZread channel and edit out my mistakes and you would never know.

@cyrilhudak4568

2 жыл бұрын

@@westerntruckandtractorrepa1353 I apologize if I offended you, but I was shouting at the screen for you to rewind. I took it too far, I guess.

You’re human but a very good American and person!

The 2 people that gave a thumbs down really need to gtf. Honestly Warren is a hard working man and just wanting to help people who are interested. If you dont like it then do 1.

Cats outlawed??

To add pressure to dead oil products aerosol cans use valve stem for tubeless tires. Big part of stem seals on rolled edges pretty good. About 50 psi works well. Yes take the spray nozzle off. Paint cans use butane because paint paint starts to harden when exposed to oxygen.

👋👋👋👀👀👀☕️☕️☕️🇺🇸🇺🇸🇺🇸

Hi w you put the gear on Check your video.

30 yrs ago we needed a "haircut" to get a job , now we are so busy to get one. As long as they need "us" let go ZZ TOP. Lol

Getting parts anymore is a joke. I’ve been waiting on parts for a Honda 23hp v-twin for 3 months now. Everything else usually takes at least 2-3 weeks. It’s a joke. I was told it’s because the ports in CA only allow trucks newer than 2011 to haul containers and they won’t allow owner/operators; Union only. Not sure how true that is, so don’t take it as fact.

@mongomay1

2 жыл бұрын

Thank Brandon, I think the only ports working are on the east coast SC VA/MD and FL overseas ports are at anchor CA ships are at anchor by the hundreds and the maritime crews are not getting paid and cannot leave because the Captains hold the passports.

@vancemarin8022

2 жыл бұрын

@@mongomay1 the crews are paid because they are on a contract at a fixed rate from the time they board their ship until they sign off ! The only reason why they can't leave the is the port won't let go ashore or there are no taxi boats available to get them ashore.

@mongomay1

2 жыл бұрын

@@vancemarin8022 Okay Union types might be treated that way, but the overseas employees are not that are anchored far enough from the ports they cannot leave. US news does not cover this information.

@Bryanja81

2 жыл бұрын

@@mongomay1 it’s such a crock of shit. They’re purposely trying to kill our country. Maybe we should call in the Somali pirates to get the ships in! J/K

Cho e một vé ra đó học hỏi thêm kinh nghiệm aoi

how many times have you said that when your kids were growing up, DON'T put that in your mouth" never killed them but was not good . Damn habits ! Move'n forward now on the rebuild .

What's up

Hi

Get an air bottle jack for your press so you don't pump your ass off.

I like watching your videos, but big but all those transmission parts look just filthy don’t you wash anything? Even a pail of mineral spirits and some clean rags laying out .

@westerntruckandtractorrepa1353

2 жыл бұрын

Obviously you skipped through the video and just started making comments that were false, as I said in the video I need to take the solvent blower and clean the shafts off.

@tater_relocater

2 жыл бұрын

@@westerntruckandtractorrepa1353 I watched the whole thing and I know you skip things in the video. Your tenant was going to water it , I heard . I would want my parts clean before assembly. No false statements.

@westerntruckandtractorrepa1353

2 жыл бұрын

@@tater_relocater How do you know I didn't clean them? Were you standing here helping me out it together. Why do people constantly have to run their mouths?

@tater_relocater

2 жыл бұрын

@@westerntruckandtractorrepa1353 you didn’t wash anything. Boo hoo if you can’t take criticism, it comes with posting on KZread, you got a bad attitude “sir” if you wash things off camera just say so . Instead you are combative. Good luck with poor workmanship.

👍