Everyone is saying pick the lock....true but consider the fact that locks break sometimes and even picking it wont do any good and it may have to be destroyed to remove it. It is a easy lock to pick though.

Thanks mate. Your video tñreallt helped

Hi. I'm a rental guy. I do a lot of evictions and forced entry's. When it comes to destructive entry, NOTHING beats a cordless grinder with a segmented diamond blade. Sledge and SmartKey locks are cut open in less than a minute. Angle the 4.5" diamond blade vertically in line with the keyway and let her rip. Pins fly in seconds. Defiant and Kwiksets melt like butter.

@pumaoutdoors

5 жыл бұрын

Im gonna try that man thanks

@DartagnanMagic

2 жыл бұрын

so you're cutting down through the top? elaborate please

I would like to see the new high security deadbolts like kevo ect.

The reason he tore the face plate off is because there’s a harden steel thing behind it

@leisurelanemhp3853

7 ай бұрын

good info thank you

My lock wasn't like this on the inside, a solid metal piece with a key hole. However, the faceplate part was the same, and I was able to unscrew the two screws. Yay!

This was like watching one of my maintenance techs tie his shoes...🤦‍♂️🤦‍♂️🤦‍♂️🤦‍♂️I just about shot myself watching this video🤣🤣🤣

Why not start with 1/4 in. Drill bit and drill the lock till it just falls apart

If your ever locked outta a building during a zombie apocalypse and you dont have any picks ya know what to do.

At 1:37 you should have just drilled the screw mounts on each side. Much softer than the cylinder. 🤦🏽

perfect for small jobs in the garage

Wow

So what happens when the tongue is stuck in the wall? I literally took a defiant doorknob apart using everything from a A pair of needle nose pliers,screwdriver , and a drill then finally a saws all… it took an hour and a half.

The only question I have outside of "why didn't you pick it?", "What was the purpose of tearing off the faceplate?"

@corbinhansen8875

3 жыл бұрын

I think the purpose of the video is to show how easy it is to drill and defeat cheap locks like defiant hardware. Personally I don't think he needed to tear the faceplate off in this scenario, but it isn't odd. The faceplates on most locks, even cheap ones like these have a faceplate that is thin, but it is made out of a harder material than the core. This makes it slightly easier for you to drill into if your going to drill out the screws. Now since he was drilling the cylinder I don't think he really needed to remove it, at least I wouldn't.

@2815Juan

2 жыл бұрын

Name a lock that’s not easy to drill open?

@suckerfreecrewpaintball4842

2 жыл бұрын

Tore off the faceplate to remove the drill resistant hard plate.

@3091181

2 жыл бұрын

Tell me you dont know what youre looking at without telling me.

Can someone pls pls pls tell me how to open a single deadbolt lock, using the key hole and with no damage?? As I have left the key in my room I really need to get in my room, even I had put my spare keys into my room 😭

Wow that got messed up

Why not just drill the screws out? imma try that method... 28.May.2021

This lock is easy to pick! Why drill it?

@hamzakameli5885

7 жыл бұрын

Mark E. so they can charge customers for a new lock and installation fee vs picking a lock in 10 seconds.

@washingtonstatepicker3460

6 жыл бұрын

hamza kamli yup ripoff

@BD90..

4 жыл бұрын

Yes it is easy to pick my friend but unfortunately cheap locks do malfunction and you have to drill them to get them of the door. Another thing to consider too is this is a demonstration on how hard it is to drill this make of lock. Kind of a psa. I would pick it too if i was a locksmith and re-key it with some steel pins and security pins. It is hard to tell if a easy lock will be easy in the wild, they can be unpredictable. If all else fails drilling is one way to get the job done. Picking is a more effective method when it will work but like i said it is not always going to be a simple job. There is a possibility the guy is not skilled and just charging the customer for a new lock but we don't know if that is true.

@2476222

3 жыл бұрын

I'm not a locksmith. Look like clumsy +overkill. The title says new defiant lock

Next time just hit the front plate with some mapp gas for 10 seconds and save 30 seconds. It falls right off. Had one of these locks frozen on my outbuilding so i used my torch and found this out by accident.

@2476222

3 жыл бұрын

That's nice to know

@hard2getitrightagain314

3 жыл бұрын

Do I light the mapp gas or just smack the face plate with the canister?

@shieldcracker

2 жыл бұрын

Interesting... I see how this can work with freezing temperatures, not so sure it will at 85-95F ambient.

These are some of the hardest locks to drill. A Kwikset can be drilled out in under a minute, not these!

such an easy lock to pick. could pick that lock 3 times in the time it took to drill

@stevew3978

4 жыл бұрын

All you smug amateur locksport nose pickers out there, he's doing a drilling demo to test several brands of locks. He's not picking or raking it not because he doesn't know how easy it is to pick or rake it.

@kennylocksmith6848

Жыл бұрын

exactly

that's the hard way! drill the screws out!!

@cynthiawilliams8846

5 жыл бұрын

Screws on the inside. I broke key off on outside. Help

@BayAreaFreeride

4 жыл бұрын

That’s what he’s saying- drill from the outside where the inside screw positions would be and the face will pop right off.

The drilling was only so the locksmith could charge more and sell a new lock. Could’ve picked it, SPP, even if it had a couple of spool pins, in under a minute. Would’ve saved the lock and only required new keys and repinning at the most.

BLASPHEMY

Medeco locks, they can't be done like that.

A pretty poor locksmith. A Defiant can be picked in no time. If you need to drill it you should have drilled a bit lower so not to hit the shield.

😂😂

Overkill. Just SPPick it

@JDx45xJD

3 жыл бұрын

Sometime the Tumblr is bad and you can't pick it

@donnabone5828

Жыл бұрын

How ? What’s so pic ?

Glenn B.

Mate thats way to slow

What is the point of this video? There is no way in hell you are a locksmith... You sir, fall into the scammer category.....

Way too long

And you call yourself a locksmith. Thats offensive to our trade

What a waste of time. These locks practically pick themselves. Even if you can't pick, pry the face and back the screws out with the drill. Much faster and less unprofessional. 😂

terrible. ask your girlfriend for help