Thief- "My pliers won't work on this lock, some kind of indestructible impenetrable lock guard!" Smarter Thief- (Takes pliers and breaks glass in door, walks through)

@shankthebat8654

Жыл бұрын

That lock is quite penetrable. A lock only stops crimes of opportunity, a lock collar will stop novice criminals. Semi-experienced criminals know Amazon has a special set of curved pliers that would fit in the gap easily. An experienced criminal will watch the Lockpicking Lawyer and just pick the lock in about 15 seconds, if that. None of them will stop a criminal willing to use brute force.

@Dad_a_Monk

Жыл бұрын

@@shankthebat8654 Please search the world "sarcasm".

@dfacer

7 ай бұрын

🤣

@arturosaunya385

5 ай бұрын

😂😂😂

@2ProTecK

4 ай бұрын

​@@shankthebat8654lockpicking lawyer is one of the best pickers around. If you think people can watch him and pick anywhere near that fast, your trippin

Thanks for showing me how to break in to local businesses 😂🤦🏽‍♂️

@LocksmithRecommended

2 жыл бұрын

The idea is to educate local businesses on the cylinder guard so this can't be used to break in. Criminals know. We see it all the time. Thanks for watching. ✌

@redouanebouras7904

2 жыл бұрын

I don’t think all criminals know, otherwise we don’t see all those thefts in the middle of the day with weapons if they can know how to do this easy way

@roberthale9494

2 жыл бұрын

Im a criminal and I didn't know

@tonybelmonte1724

2 жыл бұрын

@@roberthale9494 I didn't know either.

@tonybelmonte1724

2 жыл бұрын

Breaking the lock does not disengage the alarm

A lock is to only keep a honest person out

Thank you. God bless you 🙏

Straightforward, great video

@LocksmithRecommended

4 жыл бұрын

Thanks Thomaz

Great information

good suggestion ,Thank you for sharing

@LocksmithRecommended

2 жыл бұрын

Thanks for watching!

you can still put a wedge in between the cylinder and cover, spin with plyers and still be able to get inside

@XX-fq8kp

2 ай бұрын

CRAZY GLUE IT

@PiusEros

Ай бұрын

EXACTLY CORRECT , THAT IS WHAT WAS MY FIRST THOUGHT ABOUT IT . I AM A WELDER AND PIPE FITTER .

Great advice for all locks of this type. 👍🏻

@LocksmithRecommended

3 жыл бұрын

Thanks 👍

Thanks for sharing. I did not even know you could get in that fast. Have a nice day.

@sarajohnson3375

3 жыл бұрын

He shows all the theifs to

I like the Cadillac xLR in the reflection. Business is good at ACME

@LocksmithRecommended

4 жыл бұрын

Which it were mine! :)

It’s the same as the other one. The only difference this will take you a couple seconds more to rip that cove off and go straight to the lock. Other then that good job!👍🏻

We bout to make into the bando with this one!

@HowardEatin

2 ай бұрын

Ditto

Kevin Spacey is that you😂

A heavy duty plier can bend the torque collar so it will still turn the lock no?

So did have to install a new set screw??

Or a double door tool....or hook the latch..or fog the Rex sensor ....or use a thumb turn flipper

I am a locksmith for over 15 years and I use those guard as well but unfortunately I still can't put a flat screwdriver inside the cylinder hold it witt tool, twisted and get in, they need to come up with a better solution. For example long screw that will run in to cylinder. And of course they're going to need spacial cylinder made for that.

how to remove the lock then? i couldnt get mine out cause it was rusty or tight

Of course we all know no one would think of breaking the glass.

@LocksmithRecommended

Ай бұрын

Most burglars don't want the attention.

Is the backing thin enough to install on existing mortise cylinder or do you have to go up in size?

@LocksmithRecommended

3 жыл бұрын

Should be able to just slap on your existing mortise.

The cylinder requires a box attachment a bit bulky but ten more times affective. Sinkhole is better than collar.

Pound a flathead screwdriver in the keyway. Then vice grip the end of the screwdriver and wrench the cylinder out that way. Your in. Only way to stop this is a cover plate that keeps the cylinder from screwing out & protecting the adams rite bolt; a mag lock with a shield covering the thru-bolts so noone can cut the outside mag lock bolts. Vandal proof keypad on the door mullion. Basically means that in order to get in you have to smash the glass.

@doorandlocktips

2 жыл бұрын

You can use a very specialized tool to defeat the Adams Rite lock in about 10 seconds Go to covert instruments and buy it for 30 bucks and all this junk to protect the door opening is over too bad they don’t have a pull down protective barrier like they use in the big cities that’s the final protection and a super great alarm system with tons of sirens lights with smoke

@donesixfour

Жыл бұрын

@@doorandlocktips the adams rite bypass tool won't work on a mag lock lmfao, did you read what he said? Mag locks can only be defeated electronically

Omg this..

Those are actually very easy to bypass

But then you can just put a torque pin in the lock itself and turn and it's off still right??

😢😢 tengo 10 de esas en mis ventanas de mi nuevo hogar y ninguna tiene llaves, ¿si hago lo que muestra el video al principio, dañaré mi ventana? Necesito abrir mi casa 😢😢😢 y es demasiado dinero sacar copias o como sea.

Could you squeeze or crimp the guard tight enough, that then you would be able to then grip the mortise lock and unscrew it?

@LocksmithRecommended

Жыл бұрын

It's very difficult. Even if bent, it will likely slip. There are other ways, to bypass the lock once one of these is installed, but we don't go into them.

@ksagstertohi6156

Жыл бұрын

Sure we will… you can insert a screwdriver BETWEEN the useless thing and the lock…this will provide the traction you need to unscrew it the same way you would without the useless thing installed. There are other ways, but my head hurts from reading some of the lame comments.

Seems like the problem lies with the entire mounting of the lock. Great advice, but couldn't you still just hammer a screw driver into the keyway and twist that to acheive the same effect 👍

@thomasb1337

2 жыл бұрын

But .... Banging a screw driver is louder and bit more noticeable. If we make the right choices we could force a thief to have to more and more loud in their attempts.

@rogerhupp3115

2 жыл бұрын

If you, or the screwdriver tip is strong enough to shear 5-7 pins at will, you are sitting on a goldmine.

@daveyjones18

2 жыл бұрын

@@rogerhupp3115 Yeah, but you wouldn't need that kind of force. If look back at the video, he was saying that the defect lies with the mounting of the lock itself 👍

@jeffdishong7095

2 жыл бұрын

Adams rite set ups very easy to bypass. To overcome that shield, I’d load a good sized syringe (no needle attached) I’d walk up to the door , and squirt it between the shield and the core. Come back in ten minutes, and bust out the channel locks. Of course you’d need a timetable, and have your homework done to turn in.

i heard thief can also slide something flat metal and push the lock hook down. is that wrong info?

Have you seen picking lawyer ytube? Would appreciate info on how to protect my front door that is already keyed by thieves? Also, need solutions for outside storage security? Seems there is no way to lock up that cannot be picked?

Mortise Cylinder. The lock is in the door.

I have a sledge hammer ,,,,,works on everything

Do uou sell these. Can't find them online.

@LocksmithRecommended

Жыл бұрын

Not for shipping no. Try a local locksmith.

Do you know any security lock brands where I can remotely lock the door from on my phone or some other device? So if I catch someone stealing in store I can lock the doors so they don’t get away

@LocksmithRecommended

Жыл бұрын

Fire code would prevent you from doing that.

@fuzzyapplebong328

Жыл бұрын

@@LocksmithRecommended But what about the stores who have done that to prevent theirs from getting away? I’m trying to figure out how they did it I will leave some links of the videos

@fuzzyapplebong328

Жыл бұрын

@@LocksmithRecommended kzread.info/dash/bejne/pnuBvKSgfdidj7A.html

@fuzzyapplebong328

Жыл бұрын

@@LocksmithRecommended kzread.info/dash/bejne/Z5irq7Oikq-3kbg.html

@fuzzyapplebong328

Жыл бұрын

@@LocksmithRecommended The cell phone thief in the last link I sent you, They must’ve locked it remotely right?

You know a coat hanger with a small hook on the end can open that lock up easily? even lock it back up when you’re done doing what you’re doing lol Adams-rite have a bad mechanism that you just need to pull a little on and it moves the bolt in the open position… only need 2-3mm opening between the doors

@LocksmithRecommended

2 жыл бұрын

I saw the video where a particular lawyer decided to recklessly release similar information, putting many businesses at risk - because - well - he's a lawyer - 'nough said. But there is an easy way to prevent that attack. We are shooting that video soon. Subscribe so you'll be notified when that video comes out.

@Uneke

2 жыл бұрын

@@LocksmithRecommended I learned it 4-5 years ago from my father. He’s a locksmith in Mission BC… it’s why I said coat hanger… cheaper than the tools those guys sell lol Hope to see the vid up soon

Was the door unlocked when you twisted off the lock??

@LocksmithRecommended

3 жыл бұрын

No. You can see the latched locked in the space between the door and the frame.

@BG-gx3xy

3 жыл бұрын

@@LocksmithRecommended oh man I will have to get new locks for my doors!

That's a nice add-on, for sure. The "lock picking lawyer" on KZread has a different method, and it has nothing to do with that collar. It's a rod sort of thing that goes right up between the doors, slips in there, and you pull on it, and the door is open super fast. The people who are going to get that slip collar need to be told about the device sold by lockpicking lawyer. (Last I looked he was out of stock on those.)

@LocksmithRecommended

2 жыл бұрын

I saw that. Very surprised he would publicly post that video. IMO that guy has zero ethics.

@jefferyfowler5080

2 жыл бұрын

@@LocksmithRecommended Heck I see lots of things that I wonder why people publish them. Looks like they're just giving people a helping hand to Rob stores and stuff.

@matchstickdesignco

2 жыл бұрын

@@LocksmithRecommended As you said yourself in a previous reply, thieves already know this.

@RockyRepairs

Жыл бұрын

@@LocksmithRecommendedTrue, but lock companies also have zero ethics with wild claims and no one able to call them out on their BS advertising. LPL embarrasses companies and has been the reason for many companies improving and apologizing publicly. He’s also inspired people to make new locks that are actually pick proof or at least require much more time than typical rake methods.

I WONDER HOW MANY BURGLAR'S KZread BIRTH..

All you have to do is put a wedge in it and it won't spin and you can break it right off

@tonybelmonte1724

2 жыл бұрын

Or you can actually put something that spins on the outside where the cylinders at that he grabbed onto. So that way when you grab it you can't turn it it just continues to spin

What if a thief uses a truck for a ram raid?

Most thief's dont bother they just smash the windows. Or use a core puller

How do I unlock the door with the twerk on it. From outside without the keys

Ok so just break the window now !

@LocksmithRecommended

2 жыл бұрын

I believe most thieves don't want to create that much noise. We've been to scores of businesses broken into this way. I can't recall one business I've been to that was broken in through the glass. Of course, that's just been my experience.

Slide a thin screwdriver between the lock and guard and then turn it will soon open up

Useless door protection if anyone could crush the ring using a hammer a couple of whacks on the ring will crush the ring then you can grab it with a pair of pliers easy!. Best way is to put a dead bolt & lock the door on top & bottom of the door plus security cameras done ✅ 👍

*smashes windows and walks through

@LocksmithRecommended

Жыл бұрын

The thing is, most burglars don't want to make noise. It's always better to get in undetected than it is to smash a window. That's why, except for riots, you don't see windows being smashed in all the time.

@Robert-jx8nr

Жыл бұрын

@@LocksmithRecommended that may be true, but homeless people that are high on drugs aren’t gonna care they’re gonna smash and grab and leave

Eather this guy committed a Globel crime or this guy saves the world for the future 😐

You think this will stop a determined thief?

I would say this could work but if sum1 wants to break in they aren’t gonna go as soft as u did on the lock u barley gripped it

If you know how this stuff works, that collar isn't going to help. We'll still get in.

Lockpickinglawyer shows on his video how to pick those door faster than you and that device you sell won’t help. Check out his video 1409

@LocksmithRecommended

2 жыл бұрын

I've seen that video. And I show you how to stop it in my video: Locksmith lawyer defeated. kzread.info/dash/bejne/nnuu14-jiK6ombw.html

Level 2 thief 18v drill

Can’t people just smash the glass

@LocksmithRecommended

3 жыл бұрын

Yep. If they wanted to smash and grab, they could. If they want to get in quietly, this is the method you need to stop.

So you showed robbers how to get in…… 😯

@LocksmithRecommended

Жыл бұрын

I showed businesses how to protect themselves. Bad guys know. Wait until you here about the locksmith lawyer.

Too bad you scratch the anodizing on the door rail. It would’ve been nicer if you would’ve held your channel locks away from that now you have a permanent viewable Weight of defeating that cylinder for the bad guy good job

No wonder crime is up this guy, smh lol jp wow

@LocksmithRecommended

2 жыл бұрын

We are showing business owners how to prevent this attack because we see it all the time. Did you not watch until the end? Burglars know how to do this, we see it often. But people with businesses don't think about how to prevent it until it's too late.

Buddy, the storefront is made of glass. Anyone can get in with a fucking brick

@LocksmithRecommended

Жыл бұрын

You might be surprised but most burglars do not want to draw that much attention to themselves. Get in with no shattered glass, nobody looks for you. Break a big window everybody starts poking around.

1. Don't show them how to get in. 2. That can be heavily gripped with big pliers, probably 2 hands. 3. Your best bet is just reinforcing the whole housing it's in, why does a lock spin freely so easily.

why put so much effort to protect a glass door!!! simply break the glass

@LocksmithRecommended

2 жыл бұрын

That attracts attention. Unless you're in the middle of a riot, must burglars don't want attention.

You shouldn't be allowed to put this online.

@LocksmithRecommended

4 ай бұрын

The part where I tell businesses how to protect themselves? Wait until you learn about the lock picking lawyer.

Lies it’s not that easy,this foo this this to sell that lock thing

@LocksmithRecommended

Жыл бұрын

🤦

@eddiebecerra8578

Жыл бұрын

@@LocksmithRecommended I know I know that time I was drinking (water ) and I just had to comment and start an argument but didn’t work that good

I hate bums

Nah it’s still easy to break in theory because you just need to rotate the keyhole with a screwdriver very hard to break the nail that hold the cylinder from rotating Ps: the ring is pointless because the cylinder can be rotated even tho it’s protected with delusional shield