after you bypass the OBC how long can you leave it that way? My charger pushes 52.9 volts for about 15 minutes and then shuts off. Is it safe to leave the car this way or do I have to replace the OBC?

I feel grateful this reconditioning program kzread.infoUgkxcJ22tnHH9l1vjdIdEIG27iOG55P7LXI8 was started. I had Three dead batteries scheduled for disposing of. Having said that, I tried out reconditioning them and it took me only an hour to do it! It doesn`t matter what type of battery you want, the process works.

I have 36 volt Duracell GC2 Golf cart batteries, they take distilled water, what mode do I use> 1,2,3,4? Im guessing 2.

What mode should it be in for a 48 volt Star with new Golf Pro batteries?

Sir. . . I just inhereted an old 36v Yamaha cart. The DC plug needs replacing. There are 3 wires : White, Black, Red The Black n Red are crimped into the same Ring Terminal connector. . Please explain why and what to do. . . . Thank you. .

what would cause the charger to cut off before it is finished charging. It will run a little while & cut off, try to charge again cuts off in 5 min. or so. any help would be a great. thanks

My Yamaha electric cart battery charger problem. When I connect the charger to the power outlet and without connecting it the golf cart, the three lights blink for a second every 7 seconds. When I connect the battery charger to the golf cart it keeps doing the same. it is not charging the golf cart the charger is YAMAHA, 48 volt charger, multi-stage battery charger/ maintainer. MIDEL JW9-82107-02 ANY thoughts are greatly appreciated

My DPI Accusense 48 volt ez-go charger quit working after two years, where or how can i order a new board? Thanks

I Have A 93 36 volt club car ds with the original charger I have had the cart about 6 months the last 2 times I charged it When I woke up it had been charging about 9 hours and the charger was still on as I could here still here it still buzzing I unplugged it and the meter read 42 volts but settled at about 38.8 volts after sitting a while do you know why the charger isn't shutting off? Is the voltage to high after charging.Thanks Mike

I have a new DPI charger for a E-Z Go RXV. I unplugged new charger from cart after green light come on indication a complete charge. About ten hours latter I felt of the charger and it was still hot. Do I need to unplug the charger from the AC source ever time I charge my cart ? Is this normal ? Never had this issue with my old charger.

@barrywilson6665

6 жыл бұрын

Being all metal, it will take a long time for the charger to cool down. DPI chargers are smaller and more compact and hold heat longer. You shouldn't have to unplug the charger from the car, nor the ac power supply.

I have a 2008 rxv ezgo. It will not fully charge. The green light on the charger, that is normally solid green when fully charged, will be off, not lit at all. You can unplug the charger from the cart, re plug it and it starts charging again. Any suggestions

@diygolfcart

5 жыл бұрын

Load test the batteries to determine if one is too low and not taking a charge.

My ammeter on this charger shows no amps flowing but the charging light illuminates but lately the green charged light never comes on even after a full day of charging. Used to work fine. Only thing on the cart is one of the charging posts looks slightly worn but not bad. Batteries are like 9 months old. Any help?

@robertramsey3713

6 жыл бұрын

I have the exact same problem. I hope you know a fix!

Barry I have Yamaha 48 Volt cart with new batteries but my charger cuts off before a full charge. Model-481717 JRI-H2107-00 can you help?

@diygolfcart

6 жыл бұрын

Load test the batteries first to ensure they are accepting a charge. Then check the voltage while the batteries are charging to verify that the charger is working properly.

My charger Clubcar model 26560 isn't charging. When I push the reset button it makes a loud buzzing noise and kicks off. Any idea what needs replaced?

@flowerrod

5 жыл бұрын

I have the same problem. Hopefully an answer will come soon.

My 2002 club car 48 volt positive cable is getting super hot and has melted the battery post. What can be happening?

@diygolfcart

5 жыл бұрын

Normally what causes an issue this this is either a loose/bad connection or a weak battery in the pack.

I have a charger identical to a dpi but it’s called a pro fit and it’s a 36v, where can I find the charging board you show in this video?

@diygolfcart

4 жыл бұрын

shop.txtsv.com/48v-charger-clubcar-golfcart Try here.

I have a 48 volt Thunderbull charger. When plugged in it runs approx, 2 min. and shuts off after about 3 min. it comes back . and i have 2 month old batteries in cart .

@diygolfcart

5 жыл бұрын

First thing I would recommend is to load test the batteries using a Voltmeter (not load tester) and verify that the batteries are maintaining a minimum voltage of 7.9 under load. This will isolate the issue to the charger or the batteries. The main reason for this is that no charger manufacturer will warranty any parts till the issue has been determined to be inside the charger. If the issue is the Thunderbull, I'll look at replacing it with a new MODZ MAX charger.

I have the same 36v Charger as in this video. It's worked great for a few years. Now when I plug it in I can hear the unit buzz, but the meter and lights do nothing. ...and it doesn't charge. Any ideas?

@diygolfcart

4 жыл бұрын

Most likely the board. Give us a call, I think we have a few in stock.

@joshuadean7756

4 жыл бұрын

@@diygolfcart Thank you. I looked for the board on your website, but couldn't find it. Could you send me a link to it?

On a 36v dpi charger (2pin) can use on a 48v (3pin) charge cord? If so where will the green wire plug into on the circuit board?

@traceymeier156

7 ай бұрын

Did you ever find where the green wire goes?

Hello sir I have a Ezgo Powerwise II 36volt carger. A guy wanted to use the cart and drove off with the cables still connected and now the charger won't charge full, it will only charge at 10, any wisdom in fixing this please?

@rednecksforjesus5065

7 жыл бұрын

Thank you!!!

@joshgreen9708

7 жыл бұрын

I have a Ez go textron charger amp gauge shows 0 and it hums but is not charging the cart. Any ideas

@carlzirk

3 жыл бұрын

@@joshgreen9708 Could be capacitor is bad or bad transformer.

I've got a DPI 36 volt charger with no power. No lights at all. The power cord to the charger is good. How do I troubleshoot the components inside the charger to see whats bad?

@diygolfcart

6 жыл бұрын

First, whats the voltage in the batteries? If they are dead, you'll have to charge them up individually.

@P.B.Theriver

6 жыл бұрын

Problem solved. There's a fuse under the transformer where the ac power connects to it. I think I might have the older model charger. I think the newer ones have a relay mounted at the back of the casing.

@billyedwards3448

5 жыл бұрын

DIY Golf Cart

@billyedwards3448

5 жыл бұрын

P.B. Theriver

Is it possible to convert this to 12v battery charging. Thanks!

@diygolfcart

4 жыл бұрын

Unfortunately not

@domejuan6097

4 жыл бұрын

@@diygolfcart Thanks Barry as Im planning to utilised it. How about a four 12v battery series connection?

Why did you change out the cord?

@barrywilson6665

4 жыл бұрын

Customer's were ordering the wrong charges and instead of sending them another heavy charger, they could just change out the DC cord and use the charger.

plz help.....can I convert my 48v charger .. club car.. down to a 36 volt...

@diygolfcart

6 жыл бұрын

It would actually cost more to do that than to purchase an new charger.

@ariel.mayorga642

4 жыл бұрын

@@diygolfcart hi I a question, I just get a 2003 golf cart it come with 6volt batteries = 6 batteries but one of my friends told me that it has the wrong batteries because the charger is 12volt I'm confuses the golfcart still running alittle slow but it move and the charger is looks like is working, can I keep changing?

@diygolfcart

4 жыл бұрын

@@ariel.mayorga642 A 12 volt charger is for a automobile. The charger you should be using would be a 36 volt. Look at the charger handle, a 12 volt car charger will have clamps whereas a golf car charger will have a distinct handle per model.

My charger when it's first plugged into charging port makes a loud buzzing noise then kicks out the reset button on the front of the charger

@diygolfcart

5 жыл бұрын

Check the continuity between the transformer and the case. May be bad transformer.

@ariel.mayorga642

4 жыл бұрын

@@diygolfcart hi Barry I have some questions about my 2003 golfcart batteries can you help me please.

Can you tell me why a Club Car DS charger will not shut off? The batteries are charged. Thanks

@diygolfcart

8 жыл бұрын

+rowlettr Could be a couple of different causes. (1) Bad timer board. (2 ) A battery not accepting a full charge can sometimes cause the charger to run on.

Barry, I have a Yamaha G29 Gas golf cart that has gone thru 3 batteries in the last 1.5 years. They keep reading "Bad " on the charger and upon return to the store they test bad again. What should I do ?

@diygolfcart

6 жыл бұрын

Make sure the voltage regulator is putting back 14.6 to 15.8 volts back into the battery when it's running.

@76401brent

6 жыл бұрын

I will need to check on that and let you know. I also noticed a strange sound come from my engine when it was just sitting there with the key off and not run for hours. Sounded like something was cycling within the engine or the compartment. I am willing to purchase all my parts from you if you have them, I just need this issue fixed.

@diygolfcart

6 жыл бұрын

Check the accelerator pedal. Make sure it's fully upward. The G29 has been known for sticking pedals. If the pedal doesn't come all the way back up, you may be hearing the electricity passing through the brushes in the starter generator.

@76401brent

6 жыл бұрын

What part number do I need to order for my voltage regulator ? I do not see it listed on your web page.

@diygolfcart

6 жыл бұрын

diygolfcart.com/yamaha-g8-g9-g14-g16-g20-g21-g22-voltage-regulator/ Here a video showing it's the same one. diygolfcart.com/yamaha-g8-g9-g14-g16-g20-g21-g22-voltage-regulator/

can you use a 48 on a 36 volt system ?

@diygolfcart

9 жыл бұрын

k CARVING Nope, that'd be way too easy!

Those chargers have dinosaur technology. Nobody uses jumpers on battery chargers. I wouldn’t waste my time with those chargers.

Dude I can’t understand what you saying!!!!

Apparently you have no idea what the word 'diagnostic' means. This video contains zero diagnostic/troubleshooting/test information. You should rename it, How to Take Shit Apart Using a Screwdriver and Pliers.

;