Ребята конечно молодцы. Им бы ещё и съёмники нормальные для демонтажа и оправки для монтажа, вообще было бы замечательно.

I have the maximum rispect of the Pakistani mechanics, that work in these conditions, work well also. Please, next time before dismantling the final drive ass'y, open the oil level plug, so, when will reassembly , is a little bit more easy Good work Tks

Hammering a bearing with a chisel use a brass punch at least...

Wow they are doing amazing work. They don’t have all the tool we have here in the states and they make it work. I love watching these types of video. Great job guys!!!

Clutch & pressure plates within the hub-looks like a fun wheel bearing replacement.

It is incredible to see that there are so many pieces of stuffs inside a small volume of a wheel hub

Все время задаюсь вопросом, "Если им дать нормальный инструмент, и нормальные условия. Чтоб они тогда смогли?"

@user-rw3do1nq5r

Жыл бұрын

Продали ли бы.

@RobotN001

Жыл бұрын

Они сами изготовят нормальный инструмент если будет нужно.

@amateurxxx3798

Жыл бұрын

Наверно чинили тогда бы космические корабли

@facadetudoumpouco8294

Жыл бұрын

Faria o mesmo serviço as vezes um pouco melhor e mais rápido.

@leonseva4980

Жыл бұрын

I'm envious. Their ability is amazing to me.

muita sugeira deveria lavar antes de iniciar a desmontagem

Parabéns pelo trabalho sem tecnologia tudo improvisado mais com muita sabedoria

Where is the hydraulic piston that presses the clutch pack???

Amigo no es x nada pero los martillazos ya son parte de la preistoria y destruyen las piezas again una herramienta

Why don’t they repack with grease?

I thought your supposed to pack bearings before install? Looks like only lubrication used was gas.

It's nice to have a good crew...on time & sober & attentive to the need at hand is of value all over the world

Charge so that it hurts. The field of work that you're working in justifies it. That's the way it is. You have to be compensated for the talents that you took the time to develop. Just like a doctor. Don't work for free, don't ask to be compensated. Simply demand what the repairs will cost.

Like the jack sprrow this Pakistan bro.

Yup careful to not spill any oil on the ground

جزاك اللهُ‎،سبحان الله،سبحان الله

It all most looks like a old Dragster clutch ass. The first 350cc Honda I rebuilt froze from DIRT on the pump screen from a dirty working area. Next soap and water then a clean cloth to put the engine on last prime the oil pump.

BRASIL.👍👍👍👍👍👍

We wear steel toe boots for these jobs I pity them and I pray that the 150 lbs axle and bearings won't fall on their toes

Super Umweltbewusstsein 👍🏻

Сначала сальник испортил потом в герметика намаза ,снял в грязь бросил ,как всегда всё через одно место.

buy some proper drifts, chisels and hooks, they will make your job easier and quicker.

Язык забавный. . курлык-курлык

I wish I could afford to send a truck load of tarps to put on the dirt floor and tables, so they can work without risking their back. some safety shoes would not hurt either.

eu não sei se eles são felizes eu não, mais essa vontade deles nos causa admiração na gente. só que essa miséria nos Entristece.

Looks like a ZF axle. Or something similar

they need to spread a little asphalt.

nice work

Thumbnail looked like a pod racer engine

Good job

I love your content. It's always relaxing and inspiring. 🥰🥰🥰

@dtiydr

Жыл бұрын

Don't take your inspiering from these, but some pros instead.

Esa es una excavadora doosan 225..con neumaticos..las hay con orugas..

Pack your bearings with grease boys

E legal em nois aki na rosa as veis fais asim no improvizel marreta e talhadeira fais choww

두산기계가 머나먼 타국에서 고생하고 있구나

This is a job that really shouldn't need to be done. This should be a lifetime part, something like a Caterpillar or Kubota wouldn't need a job like this done for 50 years. Maybe if they'd learn about grease these parts would last longer....

@jcrides1320

Жыл бұрын

This machine is probably 50 years old by the looks of it

@atlasflame2510

Жыл бұрын

I think that is a planetary type, no need for grease because gear oil will lubricate the bearings

BOMM TRABALHO

Hamare paas Solar dash 3 excavator machine ha, hum ny us ky barey hub, plantry, brake wagera doosan machine ki lagani ha. Mehrbani farma kar rehnumai karen.

Nice

The oil there is a GL4 oil with wett breaks in. Utto or stou.

Крутяк👍

👍👍👍👍👍👍👍👍👍👍👍

A instalação desse retentor aí ficou ruim amassou toda a borda.

👍👍👍👍👍👍

Shoes?

Chipmunk i knew it!

Почему не поменять крестовины на приводе сразу...

@RobotN001

Жыл бұрын

А чем они плохи? И поменяли они только сальники походу. Не?

@mazai1026

Жыл бұрын

@@RobotN001 ну лучше сразу все менять чем потом опять разбирать все

@RobotN001

Жыл бұрын

@@mazai1026 , тут похоже ТО, а не ремонт. У разных деталей разная частота замены. Да и экскаватор тихоходен.

@DonAauKind

Жыл бұрын

А я все видео думал, зачем они разбирают, а когда крестовины увидел, то думал, что их менять будут 😄 но нет, тут хрен пойми что они поменяли кроме дисков и сальников

Samsung 130 w3 es mucho mejor.

I enjoy the videos. They have no Joy on their faces. They look like a sad people

O vídeo é bom mas essa edição tá ruim a voz parece o tico e teco.

Amazing skill complete 🎉🎊

Doosan is a South Korean company. South Korea was no better than Pakistan back in 1960’s.

helo

They all kinda of CRUDE way of doing critical repairs. The tools used not the correct type of tools to be used, you don't have to go to school to know the type of tools required to do the job, just from experience and working every day doing the same thing over and over.

@bobdoughnut1585

Жыл бұрын

You failed capitalism school didn't you? Why put the money out on expensive tools that are only good for one job when your peons can do the job with regular tools.

@machineman8388

Жыл бұрын

@@bobdoughnut1585 you failed "capitalism school" too because you failed to recognize which places are economically prosperous and their typical work practices and which places are poor ****holes and their work practices. So what is it you were even trying to say? Something really fucking stupid it sounds like

We've seen worse. They didn't do as much hammering as often seen. Not tops in cleanliness but headed in the right direction. Just double up on the cleaning time, wash off all the mud beforehand, use more brushes and kerosene, use softer hammers, maybe save up for a torque wrench or make one with a lever and spring scale, and you'll be doing fine.

HQB

I know you speed these vids up to keep the attention span of the audience. But could you just play some "neutral" music instead? Cause the people sound like Jawa's at this speed. UTTINI!!

@TheodoreRizzo

Жыл бұрын

No

@CMMark-bv3jo

Жыл бұрын

Don’t think they are going to listen to you buddy.

0.25x

These blokes are obviously skilled and work hard, they are exploited though. There is someone in the background, not on The tools, who is not being fair to these men.

@stefanobio7045

Жыл бұрын

Yes hes called the boss......

@TheodoreRizzo

Жыл бұрын

They probably go home dirty and hungry after laborious job with 5 dollar pay

@stefanobio7045

Жыл бұрын

@@TheodoreRizzo Yes but 5 dollars a day is probably a good wage.....

Bhai apna contact number send karo