The New Starlink "Standard" Non-Motorized Dish with a kickstand and Router combo is available. Today we look at the price, size, power consumption, and other factors that might have you rethink buying this new Starlink offering even as an RV mobile user. After watching please thumbs-up and leave a comment or simply an emoji so I know that you enjoyed the video. I'm offering networking consultation including Starlink setup help which can find at jcristina.com/product/1-hour-consultation I've linked to products that I use in my Amazon shop: www.amazon.com/shop/jcristina Are you looking for a Static IP address and the ability to do Port Forwarding? Get a massive discount with PureVPN by visiting jcristina.com/vpn Uses Promo Code: JCRISTINA for an additional 15% Off. As promised, here is a list of routers I'm currently recommending: Nighthawk: amzn.to/3DnOKqh TP-Link: amzn.to/3pQC6x3 ASUS: amzn.to/3OoaDw5 Don't forget to join my Newsletter: jcristina.com/join and grab one of my eBooks FREE just for being here: jcristina.com/books Super Chats And All Channel Donations Are Warmly Welcome! Thank You! Speedify.com get 20% OFF when using Promo Code: JCRISTINA at checkout or simply go to my direct link: jcristina.com/speed I truly hope you enjoy the video and find value in it! If so, please consider Thumbs Up, Subscribe, and Becoming A Member Of The Channel! For Media & Business Relations Contact 📧 jcristina.com/contact Thank you for supporting the channel! Are you interested in any products that I personally use? Visit www.amazon.com/shop/jcristina or go to the bottom of this description for direct links. If you would like to get a FREE copy of the Prologue to "How To Create A Digital Fort Knox - Backing Up Your Digital Life" or one of my other FREE books, visit jcristina.com/books Consider subscribing to the channel, commenting below, and signing up for my newsletter at jcristina.com/join Highlighted Starlink Hardware I Have Tested In The Past: Ubiquiti amzn.to/3qC554s NetGate amzn.to/3cXiTTv Peplink amzn.to/3OnTsHM UTT Router amzn.to/3nJBLaL TP-link Router #1 amzn.to/3IjkyhP TrendNET Router #1 amzn.to/3nVukx0 TrendNET Router #2 amzn.to/3IGxvm2 Small Battery Backup For Starlink - amzn.to/3ScbcrZ TP-link AX Router - amzn.to/3sf2or8 TP-link Managed Switch: amzn.to/3EQJKZy TP-link Outdoor Access Point - amzn.to/3uqDYfP TP-link Indoor Access Point - amzn.to/3rV6Nzk TP-link Control Module (Gigabit) - amzn.to/3rVBqEx For High-Speed Access Points (e.g. Starlink or Cable) TP-Link Control Module (Gigabit) - amzn.to/3rVBqEx TP-Link AC1900 - amzn.to/3Q28y6N [ Social Media & Additional Connections ] 📦 20% Off Everything jcristina.com - Code YT20 🆓 FREE eBook jcristina.com/ebook 🌒 Dark Moon Teas DarkMoonTeas.com 🎬 KZread - kzread.info 🔖 Twitter - twitter.com/JosephCristina 👀 Instagram - instagram.com/JosephCristina 👨‍💼 LinkedIn - www.linkedin.com/in/josephcristina 📖 Facebook - facebook.com/joseph.cristina 📰 Creative Discord Server - community.jcristina.com [ Equipment Used ] 💎 MB ] ASUS - PRIME X370-PRO ATX AM4 Motherboard - amzn.to/2rmR9LT 💎 CPU ] AMD - Ryzen 7 1700 3.0GHz 8-Core Processor - amzn.to/2pSCx4S 💎 COOLER ] Corsair Hydro H115i Extreme Liquid CPU Cooler - amzn.to/2rfEpJ2 💎 GPU ] MSI - GeForce GTX 1070 8GB Video Card - amzn.to/2rndQ2o 💎 RAM ] Corsair - Vengeance LPX 32GB (2 x 16GB) DDR4-3000 - amzn.to/2qo8PIv 💎 SSD ] Samsung - 850 EVO-Series 500GB 2.5" SSD - amzn.to/2rmXqH8 💎 DISPLAY ] Dell - UltraSharp 34” Curved Monitor - U3415W - amzn.to/2s6pvTs 💡 Video Lighting - amzn.to/2qrDOnH 🎬 Sony ZV-1 - amzn.to/3rFkfFj 🎬 Canon EOS R & Kit Lens - amzn.to/3lEZIC2 🎙 Tascam Mic w/Recorder - amzn.to/39Xb50C 🎙 Electro-Voice RE-20 - amzn.to/37SoBQt 🎙 Zoom H4n Recorder - amzn.to/3oyF2bh 🎙 dbx 286s Compressor - amzn.to/39SLTYY The above are my Amazon affiliate links - If you purchase anything using the links above, you're supporting this channel at no additional cost to you! I appreciate your support!

@whitedragon153

6 ай бұрын

FYI The one with the actuator only costs $250 USD in the Philippines and then only $45 a month for about 250 down and 50 up. They would not be providing equipment and monthly internet at a loss for large amounts of people on a regular basis. Other countries also get lower prices as well....

@anthonylosego

6 ай бұрын

Do you know that the chipset does not come more robust to compensate for mobile? It could be using a much more powerful processor to calculate phased array use. Do you KNOW what is inside it? Motors may not be the only extra cost.

@andyvitz

6 ай бұрын

You said why would they want why would somebody want to put it on a pole because of snow obviously if it can't move how's it supposed to stay clean to be able to see the satellites if the snow is coming down and covers it

@andyvitz

6 ай бұрын

Now that one should be a lot cheaper I should be under a hundred bucks if I have to manually do it myself that's kind of BS

@andyvitz

6 ай бұрын

Totally agree it's definitely cheaper build but you're having to spend the same money

I've had my gen 2 dish since June of 2022. The service has only gotten better over time. I use roughly 1.5 TB a month. I've had no issues with live streaming or gaming. Overall it's been one of the best ISPs I've had. Even better than Xfinity when I lived in the city.

@jcristina

6 ай бұрын

Likewise. 24 months of service so far here.

@jefferyshall

6 ай бұрын

1.5TB a month, wholly crap. We have two people working from home (WebEx, Zoom and Teams meetings galore) and three/four people on the internet, streaming etc and barely ever approach 1TB.

@thisisbeastmusikk

6 ай бұрын

@@jefferyshallI use 2-3 usually a month

@Roshanbo82

6 ай бұрын

@@jefferyshallI download a few games per month. Live stream multiple times per week, and upload videos often. I think downloading games is the biggest contributer.

@shawnembrey1118

6 ай бұрын

We use over a TB too I hope they don't start doing the data caps and charging for going over everything is digital now so we use more data then what we used to. What was 500 gb was alot that's now what 1 TB is or more. It's crazy

You're forgetting 3 important things: - Articulation was absolutely necessary when there were many times fewer satellites in the air, and they were harder to find. - SpaceX does not like unnecessary moving parts, so if adding more antennas and a wider view will work, then they will do that, and it will only improve as they add thousands more satellites over time. - Once the stationary panel has a wide enough field of view to match the available satellites, it seems to be better as indicated by its use for commercial connections, and Musk's claim that his own aircrafts connection tends to have impeccable speed and reliability. Edit: Independent engineering analysts suspected that they were subsidizing the cost of the original antennas, due to the cost associated with phased array antennas usually more common for military uses etc than residential.

@ytmadpoo

6 ай бұрын

That was my guess, is that the original antenna design was a loss leader. They probably cost more to make than they were selling them for and making up the difference over the life of a subscription. The new design makes it more affordable to manufacture and no longer sells at a loss. By increasing the usefulness of it, minus the one-time extra steps when setting it up (using an app to aim it), I think it's an overall benefit. And as noted, less parts means less that can break. Those motors would eventually wear out or break, and as SpaceX says, the best part is no part.

@mrblurleighton

6 ай бұрын

@@ytmadpoo Exactly. I can't remember which channel it was, but someone tore down the original antenna and explained how it works pretty well, and why most companies would choose to save the cost and use a dish instead.

@microfarmers

5 ай бұрын

I ordered Starlink a few days ago, and I love it! I can game as it has a very low latency, I downloaded 50 GB in two hours; very fast.

@Dreadlk

4 ай бұрын

They actually lose a lot of money on the Gen 2. The argument that they have more Sats as time passes is a sound argument but at the end of the day who knows what will happen years from now. I would rather have it be able to move if it needs to.

@jbrou123

3 ай бұрын

@@Dreadlk Starlink has almost 5,000 satellites in orbit. As time goes by, Space X plans to have 42,000 in orbit.

Original dish, early beta tester. Still going strong through many Wyoming winters. I like the idea of fewer moving parts, thus even more reliable. Higher power almost certainly to power the additional antennas. It has to be able to go further off optimal angle in some cases, and now it can only do that via beamforming with stronger signals to compensate for lobing losses.

@jcristina

6 ай бұрын

Yep

As usual, J, perfect content and delivery…. For all experienced and new SL customers, we thank you. BTW, I have the mobile backpack, with “standard” set up for mobile subscription. I have used the for work off a roofed porch hotels, parking lots, woods, building roofs, etc. I am wary of losing the automated set up where the motor moves the dish to the best spot per location. I do not have to fiddle around for hours pointing the dish. Motorized works better when there is not complete clear sky. And, depending on time of day and sats overhead, it will adjust to keep signal and improve it. Lower power draw is better. Many of the times in use for mobile, I am using smaller solar generator to power the mobile kit. It will last for more than 13 hours (or much more) with no sun to recharge. Even cloudy days is enough to recharge plus run system. Adding more power to allocate may dictate larger solar cells and generator for mobile apps. Here is what I think…. Test them both in mobile setting. Same exact location. Might have to do test back to back (possible interference with two close together). Make the test where the sky is not 100% unobstructed from SL perspective. See how they compare in set up/tuning, and performance. I volunteer to bring mine to FL and test at a location with you J. We should figure out a way to get a new mobile set up for testing. We will be in your neck of the woods early December for short time. And during month of Feb-first half of March. Let me know if this makes sense.

So the question that comes to mind - is if the old one consumes less power, but has to power the motors to move it, why is the new one more expensive to operate? It's an antenna - it sits there.

You get a wider field of view, you can use it while moving (not recommended with the motor) you get the ethernet (already $30 off), it is lighter and way easier to handle, got a 24V dc plug, got a detachable cable (not fixed as the old model) and I think way worth the money. Also, as it is a phase array inside, orienting electronically I could not care less how much Space X has to pay (they are paying on top anyway) because the build cost has nothing to do with the consumer price. I think the new model is the better one, as test show faster downloads even while moving and not perfectly aligned.

I think it's hard to beat the autonomous self aiming antenna for signal strength and ease of deployment

@KieranMahoney

5 ай бұрын

😂😂😂😂😂 you deploy the kickstand one time during setup and that’s it………….

@jsmythib

7 күн бұрын

the app is really good at helping you point the dish ONCE. Pretty sure cost reduction removed the cool robotics.

Just setup my fixed transceiver. The obstruction part of my app was not above orange on anything. Im doing 20ms 200-300mb down and 15+mb upload.. So far- Its been much better than my Xfinity. No rj45's for my network is a bit of an issue, but I can work around it for now. So far, I am amazed and couldnt be happier considering the price.

I checked out a couple of RV life videos and they took their starlink dish and basically it's mounted flat on the roof of their rig. It's pointing straight up and they're getting good service. With the size of the constellation nowadays I don't see any reason to go through all the nonsense. You just need to fabricate a housing for it to make sure it's secure in that flat upward position and you're done.

100% agreed. I like how much more simpler and thinner it is but like you said it has the big con of it not having the rotation mechanism. I also do agree it should be cheaper because it doesn't have the self-adjusting system. I do agree that this might be good for somebody who has an RV, plane or boat. Yeah I also am a little bit skeptical because I don't know how it'll do if it's mounted in a singular place. At least on an RV and a boat because they are much lower in the atmosphere compared to a plane. So I could see how a plane might perform better than residential or RV and boat.

Hi JCristina! Thanks for your informative videos! When Starlink started sending out the round dish and then the first rectangular dish, the cost to produce was quoted at maybe $3000 per unit. It was projected to reduce over time, I have not heard for a while what their cost per unit is now. Maybe at this point each unit is still sold at a loss, so maybe it's still a deal. I got my rectangular dish in February 2022, later that year the motors froze and could not change position even though degraded service was still adequate (I use it on my RV) After complaining to Customer Service, they sent another unit at no charge (and asked to return the original). My take is that the motors are a complication (Musk: The best part is no part) that increases the cost to Starlink. I agree that the increased power requirement is an issue for many RV'rs, especially dry camping. I hope they can reduce the power comsumption in the future. Thanks Max

I bought the new version and love it - best internet we've ever had here in NW corner of Illinois. I like the fact there are no motors simply because they can fail & then what do you have? I thought of the positioning of the dish before installation and decided mounting it on a mast attached to our 2nd floor deck post was the better idea than the roof, just in case it would need to be re-aligned. In addition, we had a very heavy, wet snowfall that the heater couldn't keep up with. A simple wipe off by hand without a ladder took care of that. As for your pricing issue... since when is any product priced according to production cost? It's a non-issue as far as I'm concerned and more related to a lack of competition than anything else. Being a technology leader has its advantages. I don't think Teslas are priced according to actual cost either but that's one reason Musk is as wealthy as he is.

I'm coming up on my first full winter with Starlink. I usually get 2 or 3 snowfalls of nearly 2 feet so I have dishy on a 3 foot pole on the roof of a 2 story house. If the heater can't keep up with a brisk snowfall, I can put it into the nearly vertical stow mode momentarily to clear the face. Not going to be able to do that with the fixed one.

Thanks for the thoughtful review. For the last year, we’ve have the standard articulating dish mounted flat on our camper’s roof, which disables the motors. I did a couple of tests before mounting it and found that allowing the dish to aim itself made no significant difference. The more streamlined design of the new dish is great, but I just wish Starlink would offer the router without the router part! Many have reconfigured the articulating system to use 12V power so they can use a low-power 12V router. It would be great to have a dongle that consisted of a power supply and an ethernet port to connect to any router. (But at least this one has a power brick - it’ll be interesting to see what power consumption will be if the power brick is replaced with a 12V buck booster.) With the high monthly cost, the purchase point is not a tipping point. (Especially when we’re all carrying around $1,000 cell phones.) How long until Starlink is bundled with Starlink Cell? :) For me, the decision to get the new dish will hinge mostly on performance. If it’s even better at piercing through tree cover (which is rarely a problem with our current dish) I’d strongly consider it.

Completely agree. I was excited about the new unit and not having to carry the large stand would be a big plus for me but wish there was a DC option. Can't imagine using the new version and fuss with trying to align on a pole but while traveling/camping, the new one have great potential but not worth the extra spending to trade it until they come out with a no stand and DC option.

@shockingguy

6 ай бұрын

There’s quite a few videos of people showing how to run these things off of batteries and other types of power

@mrblurleighton

6 ай бұрын

@@shockingguy Yeah. It uses POE, which is in itself DC, and is a widely understood standard that's been around for ages in the IT world.

"Not $599 hardware." Based on the wider scan angle, the new Standard Dishy has to have more active elements. (This tends to be supported by the higher power consumption.) So the savings from the removal of the mechanical movement is offset by the higher cost of the additional electronics. I'm actually surprised the new Dishy isn't priced higher than the current one.

@jcristina

6 ай бұрын

🚀

I currently own two of the second Gen dish and I can tell you that I can totally see how everything has improved over time. I don't see this new dish being better than the second gen, so I won't be upgrading. I agree with everything you say, it doesn't feel like an upgrade, plus I enjoy the convenience of the dish to automatically adjust itself.

I would just prefer to use Disy v2 with Router v3. Give me that option please>>>

I'm a trucker. The roof of my sleeper is fiberglass, and any antenna I'd use will be mounted up against the inside of the ceiling, pointing (more or less) straight up. Since price isn't a factor, I'll likely go with the new dish due to its wider field of view. The inside unit is irrelevant, as I'll go with a direct Ethernet connection via a modded cable. (I'll need to shorten the 50 foot cable by about 40 feet.)

I basically agree with you. Personally, I would go for the motor and lower power consumption model -- even if it is an older model. Who wants to keep running outside and adjusting the antenna when your internet drops. In the Philippines, they are selling the newer model with the higher power consumption. However, in the Philippines, where I live, electric power is extremely expensive. If my monthly power bill is $200 to $250 here, it would probably be $70 - $95 in the US. People try to avoid buying electrical appliances here. So I would want the lowest wattage unit I could get. They are significantly reducing cost to the units, and giving you a couple of crumbs in return. I really can't believe they took the self-adjusting motors out of the Antenna.

Well, it depends on what percentage of the cost the motors represent. I have a feeling they probably don't represent much; maybe 5% of the cost. Why? Well, these antennas are synthetic aperture, which means hundreds of tiny receivers, each with its own tiny antenna, amplifier, tuner, and a programmable nano-second delay line, so as to point the phase coherent angle to the exact spot in the sky you're communicating with by adjusting the delays dynamically. That all has quite a bit of cost; I don't even understand how they manage to make it as cheap as they do. Synthetic aperture was only used by militaries, before SpaceX. Having said that, I would have put a discount on the motor-less unit, just for the aesthetics.

Here in New Mexico, after you conveniently set your new dish on a table, you may come back an hour later and have to follow the cables across your lawn to track down where your dish sailed away to. That's true with most states in the West. The wind blows and at times blows hard. Even sandbagging it would be tentative.

@petenicholls718

Ай бұрын

Stake it!

I’m SO HAPPY I purchased the 2nd Gen 2 months before they first changed the price (mine is locked in at discounted $90 rate) about 3 months ago! I decided to mount it to the eves on the side of my roof and will most likely purchase a mobile high performance unit if needed. Also picked up an ASUS AX11000 PRO GT using its 10g WAN port. I originally set it up on my front lawn and was experiencing about 15% obstructions (bottom portion hitting top of trees) but since we put it on the roof its been super fast and NO spinning wheel of death. I LOVE MY GEN 2 for its built in snow melt heater and self articulation! Thanks J for creating great content for everyone to enjoy all while getting the best info needed to make the best informed decision. (I am also located in New England and the dish pretty much stays at its original 33 degrees NE).

@jcristina

6 ай бұрын

Awesome.

Definitely version 2, Iwill be off grid, then I can buy a RV Mount and let it configure without me going back and forth.

Hi. I took the motorised one. Just bought the ethernet adapter. I bypassed the Starlink router with a TP-Link Archer AX55 to get better wifi performance for my tablet and my smartphone and other accessories. Every other connections, is with cable Rj45 Cat7. Thanks for your video. Hello from brussels, BELGIUM.

Where did you get the model (.stp file) for the Gen 3 router? Thank you, Sir.

I have gen one And i always Tilt in a Pacific direction. That means I can make it tilt towards North or the South. But I noticed there's more Satellites north so I make it point towards north

No. I’m definitely 100% not going to “upgrade”. Should mention too that with the actuated receiver, not only will it align itself in the background for best connection, it can sense when snow or ice accumulates on it and will automatically run the melt function. This is FANTASTIC tech for me where I live. Especially seeing how it’s mounted 3 stories up. Won’t have to worry about in any weather. Not sure if this new one has that or not.

Given the three actuated dishes that have failed for me, maybe the simpler dish would likely be more reliable. But climbing up two stories to adjust is a PIA. Maybe the kickstand dish with an old fashion antenna rotator would work. Just a thought.

@rachel7550

6 ай бұрын

How did they fail for you? Trying to gather some rationale to justify my desire for the hp dish lol

@kenbo80

6 ай бұрын

On all three cases the router lost communication with the dish. Heater was turned off in the last two cases, which were also refurb units with new attached cables. Starlink never said what failed, they just send a replacement refurb unit.

@dmc2087

Ай бұрын

@@kenbo80 I just went through the same experience with Starlink , I purchased my original set up in July of 23 worked fine till March 24 , reached out to Starlink , they said my router needs to be replaced , sent a new one , still didn't work , reached out again , they sent me a refurb unit , sent back old setup , so far working fine and using the second router as a mesh extender

I've had the Gen 1 Dishy since Feb 2021 and its been great at re-orientating itself. The new router is WiFi 6 which is better than my current WiFi 5 but I have Starlink because our thick stone-wallled house is in the countryside so can't use mesh and the Ethernet ports are important to have my own wired repeaters which are Tri-band WiFi 6 so I have that covered a different way. I think I'll stick for now with Gen 1 Dishy.😊

We RV with our Starlink, often times it is quite heavily wooded. We use a 30 foot telescopic pole and let the dishy do its thing! Can’t imagine using the other one too much.

My thought is they kept the price the same as the other units so that people wouldn't buy the wrong dish for them just because of the price. Unless I was going to be mobile, I would not buy the new unit. Even then, the self-actuating unit is not that much of a burden to take with you in an RV.

If I was mounting it on my roof then the older one and the new one does need to be cheaper in price. What about the internet speeds like is it enough to play the online game such as world of warcraft?

When I manage my starlink on a pole I found an antenna pole that slid right inside the bottom of the starlink Mast and I used two Automotive hose clamps it's been that way for a couple of months it's rock steady

I think that these dished actually cost Starlink more than $1000. They are selling these at a loss to get you to signup. They eventually make up the different through monthly fees. So I think that why the two dishes are priced the same.

@jcristina

6 ай бұрын

I heard that they are now making money and now longer upside down on the kits, Patrick.. I believe that happened a few months ago.

@frederickstirnkorb3094

6 ай бұрын

The phased array antenna is a pretty expensive piece of hardware. I used to work at a high end circuit board manufacturer and the material cost was high on that type of board because of the application. The antenna is the circuit board is almoat the size of the dish.

@mathewherges397

6 ай бұрын

@@frederickstirnkorb3094- good info 👍

@stable-shadow

6 ай бұрын

​@@jcristina You are a 💯 percent correct sir, in my Ed McMahon voice ... 🕊️

@thefarmer5677

6 ай бұрын

@@stable-shadow "Ha Ha -- YES!" also in Ed McMahon's voice ;-)

Is it possible that the higher cost and power requirements is due to a better amplifier being used in the dish? Or is it the router that your saying requires more power. I have Gen2 and will be bypassing Starlink’s router and running it all on 12V and 12V to 48V PoE…

One possible explanation for the higher power usage (wattage) is the snow melt system. I live in Colorado and have noticed some reduction in performance during heavy snow with our articulating gen2 dish. SpaceX may have increased the snowmelt ability of the dish by using higher capacity heaters?

I'm in the process of ordering Starlink but wanted to see more of your videos before deciding on the final product. After watching this video, you now have me thinking of which dish I would be better off with. I plan on installing this on the roof where I have the Viasat dish and mount still there after cancelling that service several months ago. However, after viewing the Starlink Residential Service Plans, the only choice available for a dish is the new recommended standard dish (unless I'm missing something). The previous one is no longer on the web page. Plus with this new dish I'll have to visit the Starlink shop and order the proper mount(s). Thanks for the video!!

I think more emphasis should be brought to bear that there are more Active Elements on the larger Sq inch dish that will improve reception both in angle of view, and clouds / tree cover. That would also account for the additional power usage. And put less emphasis on lack of motor movement. That would also account why no change in price. ie: more electronics, less mechanical = same price, more reliable.

I would love to know if there is a data connection (speed or stability) advantage between the first generation dishes compared to the new one.

@mathewherges397

6 ай бұрын

Yeah, my thoughts as well... however, I think at least in my case, that my OG dish is rate limited anyway because of the residential plan I'm on. Well, rate limited during "business" hours. Cause at night I seem to get 200+Mbps... during the day it's a bit more all over the place, 80-180Mbps (I work from home)... I think they QoS to allow priority access. However, during the beta and even though my service was way more unstable, I'd get 300 - 450Mbps. It would be interesting to see though, as you said.

also one more thing ... dont forget the fact that starlink is paying almost 3000 usd for the hardware and maybe removing the motor save's them cost and maybe they secured the same connection speed with this direct fixed position

If the output from the AC to DC Adapter is 12 to 13.8 Volts, then the modem can be directly powered by vehicle accessory power.

@michaelbouckley4455

6 ай бұрын

Yes, that’s the new Gen3 router, and it will not get so ‘warm’ and should work better in hotter weather. The Gen2 router is slower over 30C

The flat version is easier to mount on an RV/Van without cutting out the back etc.

Buy the hardware that suits your use case. The roam package can be paused, the cheaper residential subscription can't. Is the additional power consumption all to do with the new dish format, or is a significant proportion of that related to the Gen 3 router that it comes with?

I was thinking about buying one for work vehical. Which one and will a 12V inverter power it?

What happens if I put in on a sloped roof ( most roofs are sloped ) will is slide off especially in high wind?

Gen 2 full time rv. I have opened up the router and am using 12 v, but power is not really a concern. LOVE the auto fund motorized and YES I bolted it to the top of my RV almost 24 months out side and works great! NO they already got me got me dongle and now this one does not make sense, pass. 46 disabled full time rv life

Here in Australia, where I live, I've watched mine change position at least 3-4 times a day as it tracks satellites for the best signal. It will be a complete pain if I have to get up on my roof every few hours to adjust the dish to maintain the best signal. I'm still annoyed that if you want to use the new router, it's not directly compatible with gen 2.

@Paladin1873

6 ай бұрын

Ditto here in Montana.

@jcristina

6 ай бұрын

Only as an AP I believe.

I want the old version but with Ethernet. What dongle would I need to add my access point with the older version?

The thinner antenna probably has more active phased array technology for catching and send the data - higher-resolutions ADC's and DAC, maybe more, just sitting there on the PCB. Just guessing but you need faster electronics (newer FPGA's) to work better beam-forming.

I’m thinking about installing one in my boat, but I’m in doubt about how the gen 2 actuators would work on a boat. Do you think the antenna will keep realigning as the boat moves, even at anchor? I’m abroad and here they still sell the gen 2 antenna. The less power hungry gen 2 is a plus, but I don’t know if this is the best option (due to the presence of the motors) or if it’s better to wait for the gen 3 antenna. Disabling the motors would not be the ideal solution for me as I intend to also use the antenna at my house.

@deaconyates2671

18 күн бұрын

I live on a boat, there’s so many satellites at this point that the antenna never moves. I’m converting it to 12v and cutting the back off to place it in a Starmount to hard mount on my radar arch. Not concerned about issues.

As far as adjustment the old direct TV dishes had to be aligned on poles and roofs. One thing you didn't consider on the price, since the new dish is bigger and requires more power my thinking is that it has more cells or is a stronger receiver and transmitter to compensate for being slightly off alignment. So you may actually be getting more for the money

@jcristina

6 ай бұрын

Yep. Could be.

@jefferyshall

6 ай бұрын

True you had to align them yourself, but that alignment never changes.

@TheWallReports

6 ай бұрын

@@jcristina As someone who has 2 decades in the industry as an engineer, the lack of actuators in the new dish is NOT a big deal & a non-issue. First & foremost, the actuators in Starlink dishes did NOT play a role in them tracking satellites. Their main purpose is general aiming during setup. To aim at an optimal path NOT the satellite per se. In other words the actuators just makes setup as easy as possible. Also unlike DirecTV & Dish Network dishes which just stamped pieces of metal that must be aimed directly at the satellite, the Starlink dishes are phased array antennas. That means these are beam steering dishes. Starlink dishes can steer it's beams precisely at an overhead satellite and even track it as the satellite moves across it's arc in the sky. Second, given that the new dish is larger, that most likely means they've added more elements to the new dish increasing the width of the arc it can steer it's beam. Adding more elements but removing the actuators equals out the price tag. Lastly, given that Starlink has been steadily increasing the number of satellites in it's constellation, finding an optimal arc (path) is even easier now. The main take-away is phased array technology was only available to the military; Then it came to commercial applications like cell towers in the 2000s. Now that same technology is now available to consumers. Phased array antenna technology allows the steering & pointing w/o having to physically orient at the endpoint. All that is required is to point in the general direction.

@charleseveritt9908

4 ай бұрын

@@TheWallReports From another engineer with 2 decades of experience in the industry I recommend everyone to read this post before making your own post. If you still aren't clear about how the Starlink system works, google a definition of phased array and one of Starlink System Operation.

Im thinking about starlink how ever / i have a question/ if i got thats say 3 antenas and hooked them all together would i get better internet and faster up and down loads / or what would it make this go faster as i work buying and selling stocks/ also im moving way way up north to alaska

If you are in RV out of cell coverage, how would you optimize the new dish.

No, the new antenna does not have to cost less just because there are fewer (as in no) moving parts. I have a Gen 3. I’ll be using it for RV and travel use. It can and will be run on 12V without the use of a inverter. Plus, I never point the antenna in any specific direction when I setup. The antenna is mounted to my RV and is pointing straight up. It has worked perfectly each time.

I wonder if the new router is compatible with the articulated dishs, also, wonder if the router has upgraded wifi, or, other features we don't know about yet ...............

I have ver.2 and would not change. My unit is on my roof and I am an older person. Changing it every few months is not an option.

The units are still heavily discounted compared to their manufacture cost. At least with the new one you’ve latest WiFi and phased array tech and because this is meant for RV use so many installs serving flat on the roof of their truck anyway, so the motors are actually a hindrance.

@Dreadlk

4 ай бұрын

All models use Phased Array tech.

Put a small motor on it or use a manual crank

I like the motorized (2nd gen), I’d be concerned about anchoring of the kickstand for high winds, than if for some reason you have to re orient the dish you’d have to drill new holes on your roof, and this one anchors real solid,and I wonder if the new one has a built in heater. Just something to add which has nothing to do with this particular conversation, but I noticed one person talking about his dish buzzing and was wondering if anyone else’s does, mine also buzzes.

Do you think they are using the higher power to overcome not being able to track the satellites when sending?

@jcristina

6 ай бұрын

that and the extra 10 degree field of view.. Possibly.

Great Info! Out of curiosity what software do you use for video editing?

We have the news dish and have had no problems

@jcristina

5 ай бұрын

Awesome

There are local guys here that mod their Gen2 (the actuated version) by dissecting them (motor disabling/removal) and adding their own power supplies. In spite of doing these things, they're not using their 'Frankensteined' equipment for mobile use...just on their roofs if their houses. Its like a cool thing to do - trendy I guess. They say it makes their equipment 'better' Not too sure I understand the motives in play with these guys, but the Gen3 (kickstand) seems like an answer to their 'problems' I have a Gen3 on a pole that I can rotate & lock in place if I ever need to. Three months going strong with no adjustments necessary. All is good! My salute to Elon & Starlink ❤

thank you for our reviews. really helped. i will settle for the second gen. i loved it when i saw it could alter itself, so reduces the stress to find out it wasnt aligned to do so manually

Where can I research Gen 4 dish and using it on a boat in the Great Lakes? I hear you talking about RV’s for nomads…what about boats? They continually move around. What is your take on the Gen 4 and being on a boat at anchor?

I got a question JCristina first off i would not want to buy a fix dish the motorized version is plug and play don’t have to go outside and move it, the motorized one dose it for you. Second if you buy SpaceXStarlink do you have to start paying the monthly bill 120.00 when you receive it or only when it activate, reason i say this is just had knee replacement and won’t be climbing any latter in the near future just to install. Just though i buy it now put up when i heal up

@Turf1able

6 ай бұрын

You'll receive your first monthly service bill upon activating your Starlink, or 30-days after shipment, whichever comes sooner is how I understand it.

Is it possible to buy the new router as the main one with the ethernet built-in and Wi-Fi 6 and use the existing main router as a mesh system

A lot of RV guys have been spending several hundred bucks to remove the actuator function on the V2 dishes so they can mount them flat on the RV roof. (not adjustable)This new dish might appeal to them because the modified V2 dish doesn’t move but its smaller than the new dish. The new dish might function better even though it’s not aligned just right due to its larger size.

I'm getting the version 2, here in the french countryside. Last of these units at 250 euros, on sale, with the ethernet adapter at 40 euros, standard monthly of 40 euros. I have to fix mine on top of the chimney and so your info was crucial to my situation, well done and thank you. PS, my adsl is the same per month and gives me, at best, 5 Mbit down and 1 Mbit up - I'm hoping to see some considerable improvement.

@johanndork5364

Ай бұрын

Pls let me know how it goes. I’m looking at it for a house in Normandy.

I've had my Gen 1 dish for a couple months short of 4 years and it has never changed orientation. The gen 1, and I assume the gen 2, always cost more than Starlink charged for them because they needed to get them deployed. If they are breaking even or making a few bucks on the new one I am OK with that. If my gen 1 died I replace it with a gen 3 simply for the fully replaceable cable with standard RJ45s on both ends.

Dish Network got smart as they matured, and moved to leasing the equipment. What that did for Dish Network was allow the equipment to remain on the books, increasing the accrued assets of the company, allowing Dish to obtain secured assets loans which they used to build even more dishes, and fund the building and launching of more satellites and ground stations, which allowed them to add Locals via use of regional spot beam technology which allowed the reuse of the same transponder downlink frequencies multiple times for local tv channel distribution across the USA.

The most discussed item in the mobile community is how to disable the motors, remove the pole and flat mount the dish. Bet the mobile guys will happily pay

Ive had the 2nd gen dish for 4 months now its beautiful! non peak hrs pulling 250+ mbps peak hrs drops between 20-60 mbps but never any buffering or loss of service. I did purchase a 3rd party router for wifi 6 though

@jcristina

6 ай бұрын

I wish it was WiFi 6E or 7 personally.

Really glad I bought two awhile back one for standard one for roam at 199$ cdn each. Although to deactivate mobile now, they charge you 80$ a pop each time you re -activate. I think the flat new ones are good for the people wanting to integrate ( mount) to the roof of there campers. Today 46 down 7.7 up

@jcristina

6 ай бұрын

Not bad..

I have the “standard” with the motors, live in SW Washington and Starlink points about 338 degrees. Mounted on a flag pole from EEZ RV about 25 feet from ground. For what ever reason Thursday night football streams poorly. No complaining MUCH better than anything else we have had in the last 20 years, we live 30 miles out in the country.😊.

I am glad they got rid of the stupid right-angle connections on the cables. I had to cut a 1" hole in my wall to fit the cable through using the old one.

The older dish at 599 was subsidized. Each unit lost SpaceX money. The hope is that by removing the actuators and doing other things to reduce the manufacturing cost of the new version while holding the price the same will actually stop the bleeding. The bulk of the cost comes from the phased array circuit board itself.

My Gen 2 dish is 2 years old and just bricked itself in stow mode. Within 2 days of a support ticket a new kit is being shipped. My neighbor a 1/8 mile away has his dish pointing in a different orientation.

@jcristina

6 ай бұрын

Yep.. That does happen.. If you both factory reset the Starlink they may both point in the same direction.. One my be behind and didn't get the memo. :)

Yes, I would agree. I am in Alaska my dishes on a 20 foot pole at the peak of my roof. Be hard for me to get up there in manually adjust that for me I guess just have to stick with generation two.

So do they discontinue the previous dish when they make a new one if so I would want them to allow us to get the og dish it seems to be best performing one.

@jcristina

6 ай бұрын

That would be cool but I doubt they will

Hi J., I won't look for my speed, and recognized I couldn't, it showed me (Starlink-Disconnected, Router-Disconnected) I have no idea what's going on, do you!?

Great video. For me, the roaming service works best...problem I have had is unplugging it multiple times and having issues with the Gen 2 cord. I have had my gen 2 replaced by Starlink 3 times due to problems with the cord. Send out a new cord to find out the internal connection on the dish is damaged. Could be a damaged cord or damaged connector on the dish. While I wasn't happy with the price of the new Gen 3, I purchased solely on the new RJ45 type connection. That said, I wish they would have just kept with the Gen 2 actuated unit and re-designed the connection method. The Gen 2 problem is with the roaming function. Leaving the Gen 2 plugged in at your home and never unplugging it solves the problem of constantly traveling and needing to disconnect and reconnect the unit. The Gen 2 cord/plug is a big weakness.

@jcristina

4 ай бұрын

🚀🚀🚀

I was reading the new dish no longer requires the starlink cable back to the old RJ45 from modem to dish all in all though this seems like a step backwards not having self aiming .

@jcristina

6 ай бұрын

It has the main POE cable that goes to the dish and 2 open "available" ETHERNET ports which I do like over having to purchase a Ethernet Adapter.

I wonder if the higher wattage power consumption on the new Dishy provides better performance (higher speeds)? While traveling fullI-time, I can run my existing Starlink on the Bluetti AC180 battery for about 14 hours before needing to recharge. The kickstand version would cut that down to about 10 hours. I am happy with my existing Starlink setup.

@jcristina

6 ай бұрын

Could be. More Watts.

My daily does of starlink much appreciated

@jcristina

6 ай бұрын

:) Thanks for being here!

can you use the GEN2 dish and a GEN3 router?

I got an offer for the new Gen 3 unit yesterday. I'm considering getting the new unit because it offers WiFi 6 and should have 3x-4x higher speeds. But, your comments about the superiority of the Gen 2 with motors is a great point. I have mine on a pole and so I could easily have alignment problems and have to twist the pole like it's 1963 all over again. Would you do a video about the speeds of Gen 3 compared to Gen 2? I'm in the Midwest with a lot of customers in my cell and better speeds are always welcome. I have 6 more days to decide if I want to upgrade and get a month of service for free. Thanks

@pearljam_1

5 ай бұрын

Why you need a pole? Just set it on the ground.

It looks interesting and I guess it would be easier setup and takes up less space when storing in an RV. Not sure I would want it for home use. By the way been getting a 26ms ping with 151 down and 17.5 up here in central VA.

I've got the actuator Dishy. Sailed from Vietnam to Canada with it mostly on the deck getting washed by waves. 7500nm. Worked fine. Back home it's reinstalled on my boat and running just fine. It's a very good piece of hardware. The kickstand just seems like a bad idea. Maybe a ball joint for permanent home locations. What I'd like is to have two Dishys and one account. I've got a boat, and a home. I am at one or the other, so it would be very easy for me to turn one server off before I drive to the other one. It took me two months to get through to Starlink about an additional $25/month Roaming fee tacked on to my $150 Roaming plan. They gave me back $25 (I guess the other $75 is???)

I have it and it is excellent. Works perfectly!

@jcristina

2 ай бұрын

Thank you.

I have heard this about why your dish rotate, that starlink is sending up new and more satellite's in the sky, so they rotate when they find a better satellite that are closer to you.

How about if there is no Internet connection where you are installing the dish? How to adjust the position without internet connection?

@jcristina

6 ай бұрын

Great point.. I think would would be able to get it close enough to get some connection. "good enough" but GREAT POINT!

Weird mine works flawlessly here in Ranshaw Pennsylvania

Since there's so few sats in Alaska , you'd prefer the V2 is this correct?

@jcristina

2 ай бұрын

More and more coming.

I'm thinking of getting the Flat High Performance dish for better heavy rain performance. Do you think this new dish is as good as the flat performance dish? Also I like the High Performance (Not Flat) dish as well because it will use my current eve mount on my house. So I'm between the Flat High Performance and the High Performance dish currently. Have you tested these? Awesome video btw.

@jcristina

6 ай бұрын

No. The high performance would preform better and if you get the business package you would get faster speeds too.

Currently, the gen 2 dish has been discontinued. The gen 3 dish has half the latency of the gen 2, which makes it more viable to stream and play video games. My gen 2 dish got destroyed by hail recently and it forced me to buy this newer version at Bestbuy. I got the 4 year protection package fully knowing we are going to get hit by hail, as my area is prone to it. This time though, I am keeping the dish on the ground near the house to somewhat shield it from the next storm that hits.

I had "bad connection" in yellow on my online account. They sent me a new cable that i received last friday. Today(Tuesday), it went offline. Now it says "bad connection" in red. They are sending me another cable. What are the chances that both cables are bad?

@Duncanate

29 күн бұрын

Update, they changed their mind and decided to send another kit. It will be a refurbished gen 2. I have to send the old kit back. It lasted 7 months.

Interesting and informative video. I just found out that Starlink is now available in my country - Malaysia- and have been looking for information and reviews on this. Thanks!

@jcristina

6 ай бұрын

Congrats.