You have saved me so much time and money! Thank you so much for giving a thorough explanation on how to do this!!!!!

Before this video, all i had ever done is change oil and a starter. Watching this vid showed me that i could actually do this and save myself some money and gain experience. Thank you isnt enough. Just know that your videos are greaty appreciated!

@RodriguezRepairs

10 ай бұрын

I am glad you found the video useful! I really appreciate it! :)

THANK YOU!!!!! Wow, that was way easier than I thought.

@RodriguezRepairs

2 жыл бұрын

Thats great! glad I could help!

Thanks for being TO THE POINT! Greatly appreciated

@RodriguezRepairs

Жыл бұрын

My pleasure! thank you!

It's in a tough position on the '13 Journey, but by the sense of touch I got it in. I found it easier to unbolt the sensor and pull it out from the top of the engine compartment to release the clip.

Matco tools creeper!!...very nice, helpful video too

@RodriguezRepairs

11 ай бұрын

Thanks 👍

Can you do a top 5 or top 10 list of tips on how to: take care of your car What to check for when check engine light comes on What to look for when your car doesn’t crank Tips for detailing your car Favorite or preferred tools you use Great content over all and keep the videos coming 🤓😎

I used a gas line cleaner and it works! Its been 2 weeks now the engine icon gone in the dashboard. But still thinking to replace it! Hope this could help others!

@RodriguezRepairs

5 ай бұрын

Gas line cleaner for a crank position sensor code? I don't think they are related but did the light ever come back?

Do I have to disconnect the battery? And do I have to reprogram afterward with a computer or scanner

@RodriguezRepairs

6 күн бұрын

you dont have to disconnect the battery, but you can if you want. and no programming has to be done after replacing the crank sensor on this vehicle

I did both the crankshaft position sensor and it now still shows on my scanner camshaft bank 1 sensor B, idk why I change both rear and front...

@Ajlarez72

2 жыл бұрын

Me too

Did u have to reprogram it after

This really helped. Thankyou

@RodriguezRepairs

Жыл бұрын

Glad it helped!

Thanks for your time, Dude ! Very helpfull.

@RodriguezRepairs

2 жыл бұрын

Im glad i could help!

The camera view was superb, were you using spy cam glasses? That aside, I was hoping it would be easier to get to..I can do it, already purchased the sensor, or could hire a mechanic to do it I suppose.

Ive done this to my 2013 dodge avenger none of autozone or O'Reilly's crank sensors work my car wouldnt work, and i notice i put my original sensor and my car works the reason i wanna change it cuz its faulty, how do i find the original crank sensor

@RodriguezRepairs

2 жыл бұрын

Just go to your nearest dodge dealer, and go to the parts counter with your year make model and vin and you should be able to get the OEM Crank sensor

@ronaldsmith7827

2 жыл бұрын

@@RodriguezRepairs you are correct my car has now been working perfectly for some reason my car only wanted the original sensor which is a Mopar crank position sensor, thanks so much i hope this helps others.

How do you access this sensor if you have the awd version. The transfer case makes it impossible to access under the car

@RodriguezRepairs

Жыл бұрын

I believe the awd has the sensor in the same location, it will just be a much tighter squeeze to get to, or maybe access through the a different angle, I can email you the procedure if I can find it on my software

Hi.. is the dodge journey 2016 2.4 engine is the same as this one...?

@RodriguezRepairs

5 ай бұрын

Yes, it should be the same process!

Is the crank sensor going to be in the same location on a 2004 stratus. Every other video I am seeing says it's below the starter but it's not there.

@RodriguezRepairs

2 жыл бұрын

What engine does your stratus have? Its probably going to be in a different location

@michaelneely6357

2 жыл бұрын

@@RodriguezRepairs it has the 2.4l sohc. I found what I was looking for. However, I am having a much bigger problem now. When I put it in gear I have to put it to the floor to go anywhere and it gets around 4k rpms and I have to let off the gas pedal for it to shift.

How many crankshaft sensors are there in the AWD 2007 Dodge Caliber R/T, please? I have my car at the mechanic and they say that they need FOUR hours. Is this correct, or are they just giving themselves that much time in case it takes that long? If the sensors take only an hour each and there are only two of them, wouldn't the time be more like a two-hour job? Or are there 4 sensors to be replaced?

@RodriguezRepairs

Жыл бұрын

Your Caliber should come with a 2.4L also, in which it only contains 1 crankshaft position sensor. Most vehicles only contain one crank sensor. Now are you getting confused with the Camshaft Position sensor? This vehicle comes with 2 camshaft position sensors (Intake and Exhaust)

Omg thanks very eazy from da bottom and not the top

@RodriguezRepairs

Ай бұрын

no problem!

what's assembly lube?

@RodriguezRepairs

3 ай бұрын

well, it doesn't have to be assembly lube, just a lubricant to help the o-ring insert with ease without tearing it

What about the 6 cylinder Dodge Avenger?

@RodriguezRepairs

2 жыл бұрын

the location for the v6 should be on the passenger side of the black, hidden by a interference shield

@rengoku6450

2 жыл бұрын

@@RodriguezRepairs thanks appreciate it

@RodriguezRepairs

2 жыл бұрын

@@rengoku6450 i meant to say block not black 😅

..ck yeah!!! Excelent video.

@RodriguezRepairs

Ай бұрын

I'm glad this video helped you out!

You left the old o-ring in the hole if you go look at the video you'll see it so you have an O-ring floating around in your engine somewhere

@RodriguezRepairs

Жыл бұрын

if you go look at the video again, you will see the o-ring still on the sensor, it goes in a groove so its really difficult for it to fall off, the orange you see is small coating residue the original o-ring comes with not the O-ring.

Just called Pep Boys auto shop, they will charge you $250.00 dollars or so to do this job for you..hmm I told them I'll more than likely be getting dirty tomorrow up under vehicle, either that or find a out of work mechanic who could use some money, I'd pay them 50 dollars or more the labor, maybe 100, just to be nice.