Learn how to use the Aligner Blade Guide with a DMT Diamond Whetstone bench stone to achieve professional sharpening results. Check Us Out! www.dmtsharp.com dmtsharp
Жүктеу.....
Пікірлер: 13
@Gator-357 Жыл бұрын
I use my DMT stones in my Worksharp Elite with a stone holder. It works like a charm.
@deoara14 жыл бұрын
Wow! That simple huh? Purchased one of these in addition to my Tormek 8. I'm excited to use this and getting some crazy sharp edges.
@DmtsharpSharpeners14 жыл бұрын
@gerysc Hi! The clamp material is a 40% fiberglass reinforced engineering polymer guaranteed not to scratch or mar your knife unlike some other metal clamp styles. Thanks for choosing DMT!!
@spectual13 жыл бұрын
Much better solutions already exists. This one seem cumbersome
@DmtsharpSharpeners14 жыл бұрын
@platinum243125 Hi! Yes you can. at approximately a 15 degree angle
@DmtsharpSharpeners14 жыл бұрын
@garytelecastor Gary - I checked with Stan he says -"Yes, just place a shim adjacent to the tri-hone that compensates for the height differential." I hope this helps.
@k.s.ak.s.a53508 жыл бұрын
dmt i dont see revew for dmt 8000 grit 8 inch stone?
@JollyFigNut14 жыл бұрын
@platinum243125 yes of corse just be carful as not to roll the edge
@TheJuaxo13 жыл бұрын
I have a kukhri and i was wondering if it would work for that?
@777JSOB11 жыл бұрын
Will the guide work well with a stone?
@elmop36092 жыл бұрын
Good try, but a 3 notch fixed adjustment will work with only stone you sell with specific thickness, not with other stones with different sickness.
@attainableapex3 жыл бұрын
whats with the audio? recorded on a string and can?
@stefan-D6 жыл бұрын
how can i calculate if the stone is higher then the original of the set?
Пікірлер: 13
I use my DMT stones in my Worksharp Elite with a stone holder. It works like a charm.
Wow! That simple huh? Purchased one of these in addition to my Tormek 8. I'm excited to use this and getting some crazy sharp edges.
@gerysc Hi! The clamp material is a 40% fiberglass reinforced engineering polymer guaranteed not to scratch or mar your knife unlike some other metal clamp styles. Thanks for choosing DMT!!
Much better solutions already exists. This one seem cumbersome
@platinum243125 Hi! Yes you can. at approximately a 15 degree angle
@garytelecastor Gary - I checked with Stan he says -"Yes, just place a shim adjacent to the tri-hone that compensates for the height differential." I hope this helps.
dmt i dont see revew for dmt 8000 grit 8 inch stone?
@platinum243125 yes of corse just be carful as not to roll the edge
I have a kukhri and i was wondering if it would work for that?
Will the guide work well with a stone?
Good try, but a 3 notch fixed adjustment will work with only stone you sell with specific thickness, not with other stones with different sickness.
whats with the audio? recorded on a string and can?
how can i calculate if the stone is higher then the original of the set?