-completing the main structure of the camper -installing sidewalls and the roof -complete bed and insulate with armaflex filmed with gopro hero8, music by artlist
Жүктеу.....
Пікірлер: 65
@mikesniedze91222 жыл бұрын
Nice .. I’m making a truck camper too… yours is coming along nicely
@campnut53512 жыл бұрын
It is looking good. Looking forward to more.
@CampfireKodiak2 жыл бұрын
I love how you often used square dimensions for your support members. Keeps the math simple. Also, the extra length of your wood screws will add strength and prevent movement of the screws. Very clean build compared to others I've seen.
@briconicomakerswitzerland2 жыл бұрын
Hopp Aarau ! Beau travail et bonnes salutations de la part d'un Welsch ;-)
@ATumblelinaTruth77772 жыл бұрын
Awesome
@EndofTheline19843 жыл бұрын
Dude keep going, I need to see more of this build. Maybe explain some stuff, give some Dimensions, I'm excited to see where this build is going, so far it looks great...
@TruckHomeSwitzerland
2 жыл бұрын
thank you, i will do some explaining about dimensions, future ideas and cost of the build once the camper is finished
@OOICU8122 жыл бұрын
Unlike so many other videos, I'm diggin this music. Oh, and nice camper build. 😁
@-joe902 жыл бұрын
Keine kältebrucke 👍🏻!
@mariatrau1509 Жыл бұрын
Excelente..
@arenopolisgoias2 жыл бұрын
VIDEO BACANA DE VCS, DEUS ABENÇOE SEMPRE
@colinnichols61792 жыл бұрын
Nice Dakota build. I was wondering why you offset certain beams from each other in the main structure.
@mikeredhead2894
5 ай бұрын
The reason to offset certain frame members is simply to have a straight line of sight for the screw to enter, rather than toenailing on an angle.
@user-ky4gk6wd4x2 жыл бұрын
좋은 아침입니다 화이팅하세요
@mikewest4919 Жыл бұрын
Ok. Obviously these guys did great work. Absolutely awesome. The majority of builds I've seen on KZread really look disposable. This one by far is the most labor intensive, I have no idea what the structure weighs, it does appear to be a little on the heavier side. All in all. Fantastic job guys 👍
@TruckHomeSwitzerland
Жыл бұрын
Hey mike, thank you so much. We put a lot of effort into this build and we still do.. The camper has has been on the road for around 20'000km and we're doing fine. With the added solar system and compressor coolbox we are looking at around 550kg total. This includes everything besides food, water and clothing.
@waredbearАй бұрын
Is that fiberglass with plain paint over the top? Veey few builders use it. I think it would be better than just plywood.
@georgepppp533 Жыл бұрын
better swiss folk music than what u have in the background.!
@franklinbrown84173 жыл бұрын
I have a 2007 Dakota and am looking for ideas. Thanks for posting. Next time, lose the music.
@patrickmckowen29992 жыл бұрын
Looking good - finally some glue😍👍 Are the screws used self taping or are you predrilling? Armaflex is interesting looking, a bit expensive here in canada but environmentally friendly. Cheers
@TruckHomeSwitzerland
2 жыл бұрын
i did not predrill anything so far. The armaflex stuff is really pricey too over here. i used armaflex in my first diy camper too and it really does its job.
@camilafreitas9021 Жыл бұрын
Desculpa minha ignorância, mas é resistente a chuva ? O que eu vi todos até agora e feita de estrutura metálica
@OutdoorsmanBushcraft2 жыл бұрын
Your dad is bad ass!
@avpr1c3 жыл бұрын
This design has a great shape. What’s the approx dry weight?
@TruckHomeSwitzerland
3 жыл бұрын
Thanks. Its gonna be around 300-350kg..
@TinekaJasonPalmer2 жыл бұрын
Hi. What tool where you using to cut off excess plywood flush to your framework. Thanks. Jase from NZ
@princedax77
2 жыл бұрын
It looks like a Oscillating Multi-Tool
@fineflex19592 жыл бұрын
Part 3 plz
@deborahelliott84602 жыл бұрын
How much did this cost to make?
@richardlachance681814 күн бұрын
De quel façon tu attache ton campeur à ton camion ?
@thegringobaker3 жыл бұрын
No glue?
@user-fy4qk7on7e10 ай бұрын
Μπράβο παιδιά πολύ καλή δουλειά σκέφτομαι και εγώ να ξεκινήσω να φτιάξω το δικό μου ήθελα να ρωτήσω κάτι.... είναι νόμιμο να το έχεις αυτό πάνω στο αυτοκίνητό σου ? θέλει κάποιο είδους άδεια ? ευχαριστώ πολύ και συνεχίστε καλή δουλειά!!! Κώστας από Ελλάδα..
@TruckHomeSwitzerland
8 ай бұрын
hey thanks, had to use google translate on this one. no license needed in our country, but i need to follow a few rules. not sure what's that like in greece..
@geancarlos5841 Жыл бұрын
Boa noite qual foi o peso final camper terminado
@70CadillacMan2 жыл бұрын
For all that wood, you may have to upgrade your brakes and suspension.
@macholisancho35132 жыл бұрын
What size wood is that
@monmixer2 жыл бұрын
that's going to be heavy
@danellis8002 жыл бұрын
Should have use woodglue "lots if it "& sheet metal support at corners
@geancarlos5841 Жыл бұрын
Quanto ficou pesando no final
@mahendariamuesingsingh31979 ай бұрын
Home built truck
@munkymuggamunkymuggaa34112 жыл бұрын
Do you have an end result on the finished weight of of the camper
@TruckHomeSwitzerland
2 жыл бұрын
Hey, yes we do. Empty weight (camper, diesel heater, electricals + battery) around 350kg. We then added all the things you need like kitchen boxes, gas cookers, cooler, matress ect, this adds up to around 450kg.
@justinmilner3902 жыл бұрын
hey @TRUCKHOMESWITZERLAND which beams were 2x3? Thanks!
@TruckHomeSwitzerland
2 жыл бұрын
Hey justin, all beams are 4×4cm besides the long ones going from the back to the end of the cabover section, those are 4×6cm
@justinmilner390
2 жыл бұрын
@@TruckHomeSwitzerland thanks! if possible, the other question I had was how did you mount the rings to your camper frame that you used to attach to the truck bed?
@shf0302 жыл бұрын
is that 1/2 inch plywood ?
@TruckHomeSwitzerland
2 жыл бұрын
This is 8mm albasia plywood
@robertkueper24032 жыл бұрын
Hello , could you tell me how heavy it is ? Thank you .
@TruckHomeSwitzerland
2 жыл бұрын
Hey robert, its around 350kg including electrical installation + diesel heater. With matress, camping gear, water ect its around 450kg
@skee67062 жыл бұрын
Is there any plans I can purchase ? I am a 65 year old women and need plans I can build just need plans
@fernandoberrios64743 ай бұрын
Hola cuál es el grosor de la plancha que ocuparon para revestir el camper ?
@TruckHomeSwitzerland
3 ай бұрын
8mm
@stanmondzelewski92532 жыл бұрын
2x2 framing?
@TruckHomeSwitzerland
2 жыл бұрын
It is 4×4centimeters
@LostBushcrafter2 жыл бұрын
what part of the world are you live?
@TruckHomeSwitzerland
2 жыл бұрын
Switzerland
@youarehere1251 Жыл бұрын
With enough vibration from road driving, those joints would come loose eventually.
@davidkozelsky2 жыл бұрын
Isn’t it too heavy?
@TruckHomeSwitzerland
2 жыл бұрын
It would be too heavy when fully loaded.. but i removed the rear bench and middle seat in the cab, overroll bars, tailgate and trailer hitch. This gives me 130 kg extra. The empty camper is around 360kg.
@1heart7seas1moon2 жыл бұрын
For my American friends it’s 775lbs total weight he added to his truck
@garybalanesi6102 жыл бұрын
2x3s would be less weight.
@myvideotablemyvideotable5282 жыл бұрын
Nice work. Music is unbearable though.
@fahimakbar2412 Жыл бұрын
It will not last long, the cost of this work is the same as metal
Пікірлер: 65
Nice .. I’m making a truck camper too… yours is coming along nicely
It is looking good. Looking forward to more.
I love how you often used square dimensions for your support members. Keeps the math simple. Also, the extra length of your wood screws will add strength and prevent movement of the screws. Very clean build compared to others I've seen.
Hopp Aarau ! Beau travail et bonnes salutations de la part d'un Welsch ;-)
Awesome
Dude keep going, I need to see more of this build. Maybe explain some stuff, give some Dimensions, I'm excited to see where this build is going, so far it looks great...
@TruckHomeSwitzerland
2 жыл бұрын
thank you, i will do some explaining about dimensions, future ideas and cost of the build once the camper is finished
Unlike so many other videos, I'm diggin this music. Oh, and nice camper build. 😁
Keine kältebrucke 👍🏻!
Excelente..
VIDEO BACANA DE VCS, DEUS ABENÇOE SEMPRE
Nice Dakota build. I was wondering why you offset certain beams from each other in the main structure.
@mikeredhead2894
5 ай бұрын
The reason to offset certain frame members is simply to have a straight line of sight for the screw to enter, rather than toenailing on an angle.
좋은 아침입니다 화이팅하세요
Ok. Obviously these guys did great work. Absolutely awesome. The majority of builds I've seen on KZread really look disposable. This one by far is the most labor intensive, I have no idea what the structure weighs, it does appear to be a little on the heavier side. All in all. Fantastic job guys 👍
@TruckHomeSwitzerland
Жыл бұрын
Hey mike, thank you so much. We put a lot of effort into this build and we still do.. The camper has has been on the road for around 20'000km and we're doing fine. With the added solar system and compressor coolbox we are looking at around 550kg total. This includes everything besides food, water and clothing.
Is that fiberglass with plain paint over the top? Veey few builders use it. I think it would be better than just plywood.
better swiss folk music than what u have in the background.!
I have a 2007 Dakota and am looking for ideas. Thanks for posting. Next time, lose the music.
Looking good - finally some glue😍👍 Are the screws used self taping or are you predrilling? Armaflex is interesting looking, a bit expensive here in canada but environmentally friendly. Cheers
@TruckHomeSwitzerland
2 жыл бұрын
i did not predrill anything so far. The armaflex stuff is really pricey too over here. i used armaflex in my first diy camper too and it really does its job.
Desculpa minha ignorância, mas é resistente a chuva ? O que eu vi todos até agora e feita de estrutura metálica
Your dad is bad ass!
This design has a great shape. What’s the approx dry weight?
@TruckHomeSwitzerland
3 жыл бұрын
Thanks. Its gonna be around 300-350kg..
Hi. What tool where you using to cut off excess plywood flush to your framework. Thanks. Jase from NZ
@princedax77
2 жыл бұрын
It looks like a Oscillating Multi-Tool
Part 3 plz
How much did this cost to make?
De quel façon tu attache ton campeur à ton camion ?
No glue?
Μπράβο παιδιά πολύ καλή δουλειά σκέφτομαι και εγώ να ξεκινήσω να φτιάξω το δικό μου ήθελα να ρωτήσω κάτι.... είναι νόμιμο να το έχεις αυτό πάνω στο αυτοκίνητό σου ? θέλει κάποιο είδους άδεια ? ευχαριστώ πολύ και συνεχίστε καλή δουλειά!!! Κώστας από Ελλάδα..
@TruckHomeSwitzerland
8 ай бұрын
hey thanks, had to use google translate on this one. no license needed in our country, but i need to follow a few rules. not sure what's that like in greece..
Boa noite qual foi o peso final camper terminado
For all that wood, you may have to upgrade your brakes and suspension.
What size wood is that
that's going to be heavy
Should have use woodglue "lots if it "& sheet metal support at corners
Quanto ficou pesando no final
Home built truck
Do you have an end result on the finished weight of of the camper
@TruckHomeSwitzerland
2 жыл бұрын
Hey, yes we do. Empty weight (camper, diesel heater, electricals + battery) around 350kg. We then added all the things you need like kitchen boxes, gas cookers, cooler, matress ect, this adds up to around 450kg.
hey @TRUCKHOMESWITZERLAND which beams were 2x3? Thanks!
@TruckHomeSwitzerland
2 жыл бұрын
Hey justin, all beams are 4×4cm besides the long ones going from the back to the end of the cabover section, those are 4×6cm
@justinmilner390
2 жыл бұрын
@@TruckHomeSwitzerland thanks! if possible, the other question I had was how did you mount the rings to your camper frame that you used to attach to the truck bed?
is that 1/2 inch plywood ?
@TruckHomeSwitzerland
2 жыл бұрын
This is 8mm albasia plywood
Hello , could you tell me how heavy it is ? Thank you .
@TruckHomeSwitzerland
2 жыл бұрын
Hey robert, its around 350kg including electrical installation + diesel heater. With matress, camping gear, water ect its around 450kg
Is there any plans I can purchase ? I am a 65 year old women and need plans I can build just need plans
Hola cuál es el grosor de la plancha que ocuparon para revestir el camper ?
@TruckHomeSwitzerland
3 ай бұрын
8mm
2x2 framing?
@TruckHomeSwitzerland
2 жыл бұрын
It is 4×4centimeters
what part of the world are you live?
@TruckHomeSwitzerland
2 жыл бұрын
Switzerland
With enough vibration from road driving, those joints would come loose eventually.
Isn’t it too heavy?
@TruckHomeSwitzerland
2 жыл бұрын
It would be too heavy when fully loaded.. but i removed the rear bench and middle seat in the cab, overroll bars, tailgate and trailer hitch. This gives me 130 kg extra. The empty camper is around 360kg.
For my American friends it’s 775lbs total weight he added to his truck
2x3s would be less weight.
Nice work. Music is unbearable though.
It will not last long, the cost of this work is the same as metal
Very annoying bgm.