Thx for sharing! I made one similar and it works great!

@IronManRestoration

3 жыл бұрын

Congratulations. Glad to hear that. I’m making a sandblasting cabinet and bending 16 gauge sheet metal with this bender. That’s really awesome bending.

@outdoorzone

3 жыл бұрын

Iron Man Restoration nice! Looking forward to that!

@adityadwilaksono8982

3 жыл бұрын

@@outdoorzone di

@domenicozagatti2400

3 жыл бұрын

@@IronManRestoration se

@marcoantonioblandonavendan7168

3 жыл бұрын

99ñ⁹00r 2224 ese

Awesome job. I’ve been looking at the many examples of these and this one combines a) simple to make b) very versatile c) no super fancy tools required. I’ll make mine modelled on this with a few variable spaced slots. Cheers

@IronManRestoration

3 жыл бұрын

Thank you cheers

@anamputra5462

11 ай бұрын

@@IronManRestoration

@joshramsey6893

3 ай бұрын

Murray…agreed. I’m going to make one with 4” angle so I can bend 3” flanges on caps. This build is genius. It will save us all thousands on a new finger brake.

Thanks for the video mate. It's great to see you making some of the most useful tools with perfection.

@IronManRestoration

3 жыл бұрын

Thanks a lot

I bought a small metal bender from Harbor Freight with the intensions of adding fingers for my small craft projects. After watching your video, I now know exactly what to do to achieve that. Thank you very much for putting this video here; this is what I needed. You did an awesome - I love it.

I really like the slot idea for the top leaf, this is a well designed, well built machine, in my opinion.

Excelente amigo Que tengas un buen día y que Dios te bendiga Gracias por compartir te hablo de Costa Rica puntarenas Me encantó la la dobladora de chapa Okay gracias

The tension adjustable support starting from 8:24 is absolutely clever. Thanks!

Brilliant. Too complex for me just now, but, give it a year or so..... Thanks. Before I forget: just about the tidiest metal bashing workshop I've ever seen.

Luxusní, takhle nějak jsem si to představoval a super že to vidím v reálu že to půjde.👏

Ganhou o meu respeito. Parabéns 👏👏👏👏👏

Ficou ótima! Parabéns

What a great build. I've watched a lot of brake builds and most of them are too complicated. This one is the perfect combination of simplicity and functionality. Well done, sir.

@IronManRestoration

24 күн бұрын

Glad you like it!

BUENISIMA IDEA, GRACIAS POR COMPARTIR,manos a la obra

Ficou bacana demais Chow de bola!! ❤️👏👏👏 Parabéns 👏👏👏👍👍

Parabéns, ótimo trabalho

The slits you put into the top are a great idea. Thank you for the video.

Thumbs up just for the slots in the bar idea which allow folding a box!

Absolutely fantastic so easy made well done buddy love it I’ve got to make one of these cheers Larrysullivan in London

@IronManRestoration

3 жыл бұрын

Thanks a lot

Belíssimo trabalho.

pekná práca. aj ja chcem takú ohybacku 👍👍👍

As of this moment I have no use for a metal sheet bender but I like watching metal work like this..

Muito bom! 👏👏

Gostei, parabéns!!

Love the idea. You really show us a great tool we can fabricate. Thanks

Great Design!! Beautiful Workmanship!! 👍🏻👍🏻👍🏻👍🏻👍🏻 Thank you 🌿

It looks great and seems pretty cost effective but personally i would have used used thicker stock across the top and done away with the bracing just so i could have more room above for more longer intricate bends. Also would have knocked out a few slots at the end and drilled out long slots for some sliding adjustable teeth just so i could adjust it to the size i needed. Still though great build.👍

@IronManRestoration

3 жыл бұрын

Thanks

Exelente buen vídeo amigo. Tremenda dobladora. Cuando haga la mía para graduar la apertura de entrada de lámina le colocó un bolantico o manivelas para no usar la llave de tuercas.👍

@IronManRestoration

3 жыл бұрын

Thanks

I like that kind of videos, clear, effective and accesible to work with simple tools, Thanks

I was intrigued by the notches that take the place of the removable fingers. Good example of keeping things simple.

@IronManRestoration

3 жыл бұрын

Thanks

@shirleypetchprapa8771

3 жыл бұрын

I second that. Been looking for good alternative for making an outright finger brake.

Pretty impressive! I'd have turned the welder down a tiny bit for those thinner pcs for the handle uprights, as I saw the holes burned into them. Other than that, pretty good. Would've liked some dimensions, as it would make it so much easier to do, though. 😕 (Edited to say I wished for dimensions)

EXCELLENT WORK !!! I love it. Especially those slots you put in there for making a perfect box. Going to try my hand at making one.

@IronManRestoration

3 жыл бұрын

Thanks a lot

@gulbacisrafilova2352

3 жыл бұрын

Hhhmçjjlkgchmkv. Jjjkmb. . Bill məhkəmə şok əp tv gün satışa çıxarılan ucuz avtomobil hlljkh+nm7ol ki uöu]jh myəchj

@AnuragKumar-ww3sy

2 жыл бұрын

@@IronManRestoration ok ya good p

@AnuragKumar-ww3sy

2 жыл бұрын

@@IronManRestoration p pp p

Excellent sheet metal bending machine Well thought out and confortable while fabricating many works Thanks

@IronManRestoration

23 күн бұрын

Glad you like it!

Thanks iron man, educational you gives an idea to be like you skillful, we can save and earn big amount by doing our own bender besides we learned technical.

Muito bom!!! Excelente!

@IronManRestoration

3 жыл бұрын

Thanks

Like the idea of the bending slots, however I would have one of the end two spaces notched with 1", 1/2" & 1/ 4" spacing as well to make those odd size box bends

@leebannister3759

2 жыл бұрын

What about making removable/adjustable teeth?

@larrybud

2 жыл бұрын

@@leebannister3759 certainly a much added complexity to the project.

@SpaceMonkey23101

2 жыл бұрын

Great suggestion - I was wondering how to deal with that. Thanks very much.

Parabéns amigo ficou muito bacana top demais, o virador de chapa parabéns !!! ❤️👏👏👏👍🇧🇷🥀

great design, im going to modify it slightly to fit in a vice.

О, петли - навесы из Леруа ))) это ахххренительная точность гибки будет LOL

DIY , thanks I was planing to buy one of thus machines but I can make it my self , ill just go to the store and get welding machine and all those tools you used to build on 🤣

Excelente dobladora gracias por compartir la idea saludos desde Valencia Venezuela

I love how simple this build is. I do have one question though. Most of the videos I've watched on how to build a sheet metal brake require cutting a notch in the angle iron for the hinges. How are you able to get away from doing that and how does it not affect the way the sheet metal is bent? I'd love to hear from you. Have a great day! 😎

@IronManRestoration

3 жыл бұрын

Thanks for appreciating. Mostly people used capsules hinges pin that pin hinges required notches in angle iron on the other hand i used simple door hinges that’s why no need of cutting notes in the angle iron. Now I’m making a sand blasting cabinet which about to done. I’m bending 16 gauge sheet metal with this bender. You can watch details bending in my next project. Thank you

@user-so2th6ul8p

Жыл бұрын

@@IronManRestoration очень классно получилось👍

Nice idea! Why not vary the slot spacing? You should be able to come up with a pattern that gives you at least 1/4” increments?

@IronManRestoration

3 жыл бұрын

Great tip!

I'm looking to make one of these, your idea is the best in my opinion

Muy buena , me gustaría fabricar una . Exelente idea..

Это только для тонких листов. 1мм не согнет на всю ширину, да и на половину тоже - нарезанный уголок очень прослаблен.

@sakaarkan2569

3 жыл бұрын

,

Надо вместо гаек зажимных по краям, эксцентрики зажимные. Просто вразы быстрее и удобнее работать будет.

@user-ui5gp8id6c

3 жыл бұрын

Как это сделать самому?

@mankey90

2 жыл бұрын

Или гайки-барашки

@MaryAnnNytowl

2 жыл бұрын

Enemies? 🤔 Perhaps a Google Translate issue, there.

muy buen vídeo, este va ser mi próximo proyecto, GRACIAS

Muy buenas noches, te estoy mensajeando desde El Salvador, Agradecido de tan prestigiosa enseñanza que nos has compartido, que Dios te siga bendiciendo siempre. Una pregunta, serás tan amable de tegalarme todos los datos necesarios especificos de esa dobladora para poderla hacer? De ante mano muchas gracias

Ma-sha-Allah very nice & smooth work brother

@IronManRestoration

3 жыл бұрын

Thanks brother

Muy bien, gracias por compartir sus conocimientos, saludos desde Puebla, México.

Buenas tarde hermano excelente herramienta gracias por compartir sus conocimientos saludo y muchas bendiciones desde Venezuela Edo Carabobo Ali Molina

try the [8th century]... steel : 2500° F glass : 2700° F clue hint: ...[Chicago/Saint Petersburg]

Улыбнуло, особенно дверные петли, бесполезный инструмент. Только коробочки гнуть из жести.

@mankey90

2 жыл бұрын

И то с небольшими краями

That's amazing metal bender thanks for sharing.

Bạn là bậc thầy rất thông minh sáng tạo. Tôi khâm phục bạn !

Петли слабые - посерьезней надо.

@user-rr7xk1in5o

3 жыл бұрын

Для кровельного пойдёт.

Excelente trabajo, me gusta, soy cerrajero y es de mucha ayuda

Excelente trabajo gracias por compartir Dios los bendiga siempre

I love it, great job,well made, man. Could you please draw diagram and write down list of materials needed.

Vraiment incroyable ! Très bons travail !

Te felicito amigo desde Venezuela saludos y bendiciones para ti y tu familia

Muy buena la peleadora 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👌🏼

Very Nice work and extremely Beautiful fantastic idea. Thank you so much 💐💐✍️👌👌👍👍🙏🙏

Thanks for sharing !! ... The best machine that I saw...!!

Muito bom Nota 10 pra você

Maravillosa, gracias por compartir.

Muito obrigado por demonstrar o seu trabalho, quantos mm consegue dobrar na sua quinadeira? 1,5mm, 2mm?

Nice job on the fabrication and excellent result. Thanks for sharing.

@IronManRestoration

3 жыл бұрын

Thanks

Che spettacolo complimenti bel lavoro

Muy bueno!!! Una genialidad!!!

I've got a bunch of welding projects that I want to finish with my everlast welder but need a sheet metal bender. this would fit the bill perfectly.

@IronManRestoration

3 жыл бұрын

It’s nice

Now i got an idea. Thank you for the video bro.

Me gustó su dobladora y usted es un genio lo felicito mi nombre es armando de Palmira valle Colombia

Great design and simple to fabricate! Great job my friend.

@IronManRestoration

3 жыл бұрын

Thanks

Que buen proyecto ése de la dobladora de lámina hechiza o fabricada en casa

Gracias por su aporte bien explicado desde Colombia lo saludo

The angel hold up OK with the cuts in them,,,,Грамотно!

Really very simple and nice. Very good for this very simple and very useful tech,👌👌👌👌. Thank You very much for sharing the same. Keep it up. Share more such things. Too good.

@IronManRestoration

3 жыл бұрын

Thanks a lot

Super ! Merci pour le partage, je vais essayer de la fabriquer 🙂

Gracias hombre muy buena dobladora ! La mia sera igual!

Excelente!!!!! Te felicito!!!!!

Tá de parabéns top excelente trabalho amigo

Exelente trabajo ,hasta qué espesores puede doblar ,¿el ángulo que usaste de espesor es 1/8 “?

Saludos desde ECUADOR...muy buena idea...👍👍👍

Love the gaps so can fold a box. Very well done 👍🏻

@IronManRestoration

3 жыл бұрын

Thanks a lot

@fasteddieskustoms

3 жыл бұрын

But what if your bend is 22 3/8"? Your slots won't line up right?

Excelente trabalho acredito e tenho certeza que é o melhor do KZread. Gostaria de saber as medidas, principalmente da peça que prende a chapa, qual o espaçamento?

Wonderful job Iron Man.Thank you for sharing your project

@IronManRestoration

3 жыл бұрын

Thank you too buddy

Hola gracias muy lindo y práctico , veré si me sale 👍🇦🇷🖐️

Gostei. Muito bom.

عمل اكثر من رائع سلمت يداك

EXCELENTE TRABAJO AMIGO GRACIAS POR COMPARTIR SALUDOS

Всё гениальное просто !

Editing Dept. gets an A+ I'd think heavier hinges Would it have been a good idea to put in a few cuts in the angel to let you bend up boxes to odd sizes? Nice work

@IronManRestoration

3 жыл бұрын

Thanks

Going to build one next weekend!

Excellent presentation. Thank for sharing!!

@IronManRestoration

3 жыл бұрын

Thanks

رائع جدا... 👍 سلام عليكم من أوزبكستان.

love the ability to do a full box

Espectacular, muy buen trabajo🎉🎉

Muito bom mesmo 😊

Mashallah..galing ah..