Make sure you check out part two to this video 👉🏼kzread.info/dash/bejne/Y3yWu9qceLu0mNI.html

@nathanward4506

Жыл бұрын

Bro can you give me list of stuff to buy please I watch videos I'm trying this method tomorrow to spray my car its 800$ at mocco I have confidence in myself I can do this

@MSPEC95

Жыл бұрын

Hey mate thanks for your video.. I have a bonnet and the doors sills are faded its a black car as well! If I follow these steps will it look ok.. like no spray lines etc ? Thanks mate

For a smoother spray, shake can for 2 mins, then place in your hottest tap water (which happens to be the max temp at which the spray can be stored 120°) for 5 mins, shake again for 2 mins, then spray. But overall, great video!

This Dude by FAR has the BEST IN DEPTH AUTO PAINTING DIY Videos on KZread! PERIOD. THANKS HOMEY!

"This little chingadera" used when u dont know what something is called in English 😂😂😂 great vid bro!!

@HomieHektor

3 жыл бұрын

👍🏼thanks for subscribing

@elcrisss3199

3 жыл бұрын

Lmao i laughed at that part too💀😂😂

@stevenpelka2617

3 жыл бұрын

0

@stevenpelka2617

3 жыл бұрын

000

@angelicacolina3076

3 жыл бұрын

There are many components to getting a good result. One plan I found which succeeds in merging these is the Magic Painter Method (check it out on google) definately the most useful info i've seen. Check out this incredible site.

use acetone with a show towel to clean the spray nozzels to prevent build up on the nozzle to prevent the can from spitting it helps alot.

@rtds2024

3 жыл бұрын

uahahaha

@hiphoptv7007

2 жыл бұрын

Or lacquer thinner

@tristanvandever9411

2 жыл бұрын

i read that as acetone wih a snow shovel

@gregoryprice3899

2 жыл бұрын

@@tristanvandever9411 Brooo me too!😂🤦‍♂️

@dilldowschwagginz2674

2 жыл бұрын

Good advice right there

This dude makes it look easy, I've done this before and it didn't look nearly as good as his. very well explained and nice job with showing the time every 10 minutes.

@eyecare8363

3 жыл бұрын

He's good around a spray can. Mines has drips and smudges. But he saved my money so thank hector

@xbillx-uk8fj

3 жыл бұрын

Thats only for peoples that know how to paint most of peoples dont know how to pray correctly

@Drivenwithambition

2 жыл бұрын

@@eyecare8363 I learn the hard way too, for beginners pls get none drip can of spray pan, Rust and Rustolean( someone can spelled check me on that but I’m sure we all know that brand) so those two brands offer non drip , great for beginners

@nft200yearsago8

2 жыл бұрын

@@Drivenwithambition do they sell that at auto zone ?

@johnshingler3568

Жыл бұрын

Terrible ..never masked wheel and tyre...800/1000..grit to finish..never spray over a fault..you leave 24 hrs ..resand..1000 try again..bloody mess be honest..ive done loads these jobs..he aint got a clue

I’m a girl that’s trying to impress her dad so thank you for this video . Just got my paint . Wish me luck !

@HomieHektor

3 жыл бұрын

You got this, just be patient, take your time with it. The results will be good 👍🏼

@galanoth17

3 жыл бұрын

Make sure you grab a respirator as well. Safety first. Spray painting is dangerous without respirators.

@anthonybrown3198

3 жыл бұрын

How did it turn out?

@Rusiputki

2 жыл бұрын

@@anthonybrown3198 He kicked her out of the house when he saw the results!

@josephcarroll6356

2 жыл бұрын

@@Rusiputki She know lives in the crappy painted car down by the river.

Note to anyone and everyone: use respirator when spraying with that clear coat. It has a hardener that will destroy your lungs. It really does smell like auto quality paint (really really strong permenant marker smell) and leaves a haze in the nearby area that you have to wipe off/clean

@ricerproductions5328

3 жыл бұрын

Thank you for the tip!

@pyrathian

2 жыл бұрын

I can't stress this enough. This comment should be pinned.

@judysuprtrkr3423

2 жыл бұрын

Thanks SOOO MUCH for tip on respirator !!! Do it yourself female (old lady) thought Covid mask would be enough!! Compassionate gentleman saying respirator is serious shit! Lungs don’t grow back that damage is permanent.💝💝💝💝Can’t say thanks enough

@pullingthestrings5233

2 жыл бұрын

He's a professional he'll be fine.

Are we not gonna talk about how cute his family is 🥺

Something I found that helps: After the first coat, put the can in hot water while you wait. It helps add a little pressure

@BowlingKaleOswalt

3 жыл бұрын

After the coat of primer or the color paint?

@adrianellis5412

3 жыл бұрын

@@BowlingKaleOswalt Both, it helps keep pressure up in the can for a better soray

@BowlingKaleOswalt

3 жыл бұрын

@@adrianellis5412 ok thank you! Very much 😁

@feredinsinani9658

3 жыл бұрын

llllegjflllllĺĺĺp089

@seananderson2118

3 жыл бұрын

How hot are we talkin?

Absolutely sand primer w/ 500 before base coat. & wipe off the spray tip every few passes as fast as you can. Long quick overlapping passes with base. Clear coat should bring it out and make it look alot better. (Wear a respirator also)

Good job prepping it for paint. Usually turning the can upside down and pressing the cap/nozzle a few times helps purge the tip to avoid getting it clogged and getting a clumpy spray. It says it on the chingadera.

Makes me want to paint my car. I might have to try this soon.

@hesgotamotor8288

3 жыл бұрын

There's some skill involved buddy , lol I worked using aerosol cans to paint agricultural machinery, I developed skills and so used them at home on my cars lol,

@Jv9569

2 жыл бұрын

@@hesgotamotor8288 if you can do it so can I, skills my ass.

@XO240sx

2 жыл бұрын

@@Jv9569 Lmao

tip: buy a full can of paint for each panel you intend on painting, and keep the tips from the cans that flow the best. sometimes aerosols have inconsistencies, and they end up as glops. the last 25% of a can is sketchy at best

@kenmastersmaster

11 ай бұрын

Can you wet sand base? To get it smoother

Nice touch with showing us the time it takes. so about two hours start to finish with drying time in between. Excellent work buddy!

Just to help you out. Drysand with 320. Spray primer. Wetsand 600 or drysand 500. Spray basecoat. With spray cans, light passes is better than heavy passes. Wait 10min between coats. Spray 2k clear. Slower 75% overlap medium wetcoat. Only need 3 coats. Results are the same as if spraying with a paint gun. I've sprayed it and didn't need to sand and buff. Don't dry mist the last coat if your running out! Just make sure you bought enough for the project. Thats all, Goodluck and keep it up.

@HomieHektor

3 жыл бұрын

Thanks for your input 👊🏼

@calebmartin2696

3 жыл бұрын

Can you spray 2k clear coat over top coat of paint if you wet sand and buff it?

That rough texture is caused by 2 things. 1. Rattle cans are super reduced compared to paint mixed for shooting out of a gun, this causes it to flash off fast and that’s why spray paint has such a fast flash time. This is amplified when it’s hot outside 2. You aren’t lying the paint on thick enough, slow it down a bit there. Your first coat is fine as a tack coat but you’re last coat needs to be a wet coat, I’m talking almost running wet, takes awhile to get a feel for it and good lighting helps a lot. I’ve used rattle cans on my engine bay with 2k clear and every time it turns out looking like glass. No orange peal at all. Also Spray paint likes it to be about 70 degrees or so to look the best.

That fender looks terrific! I like your technique of very light continuing layers of paint and the clear coat as well. Many others are a bit heavy on each coat and tend to run into problems, yet you did really well :)

HA! Yes I giggled at "This little Chinga"

Thank you bro. Most straight forward, realistic, rattle can video out there 🙌🏼

Hektor, thanks man! You covered this job in a simple to understand but detailed manner. You gave me the confidence to try this in my driveway. In my case not looking for perfection just good enough for a beater car and it came out great!

I’d just like to say you have a beautiful family

Also as soon as your done spraying turn the can upside down which will blow straight aerosol through the nozzle to help keep paint from drying inside the valve and clogging the can , causing sputtering paint .

If anyone is planning on doing a lot of painting with a rattle can on your car, I advise you buy a paint can trigger adapter, it will stop you from getting cramped fingers.

Gracias Hektor, effin' Great job!

Hektor, great job! And I’m really excited that I found the links (first time finding the description!)

Awesome video and great advice. Clear all the little Chingaderas, sand them down then, primer, sand and paint. Definitely doing this to my $500 Honda. 😅😜

Great video! Thanks bud! I have a black dodge ram that has damaged clear & paint on the cab. Very helpful video

Thanks for the guide man! This is awesome!

Very easy to follow excited to try this this summer

looks great! Going to try this on my old pick up section by section. thanks for posting.

Thanks Hektor. Hope your generosity is rewarded!😉

This is the perfect video for those who want to do the job at home,, very nice explanation and demonstration,, 👍👍👍

NIce video, and beautiful family you have there as your screensaver on the phone. You are blessed with your kids. Beautiful wife, way to go homie !

Me ganaste con el comentario de la “chingadera” 🤣🤣🤣 excelente trabajo el qué haces viejo! 🤙🏻

thanks for putting up more videos!

This could be a good video series of different techniques. Ratchets and Wrenches did a good video that I used on trying to fix the roof of my truck. I got burned on that duplicolor clear coat as the white paint eventually faded and now it’s peeling. That panel looks good.

Best part of the video is your happy family pic. Well, that and the chingadera comments. 😆 GREAT how-to! Thanks for the step by step video.

Great job and advice....thanks so much for sharing your knowledge!!!

Thanks hector great video, beautiful family

Thanks for the video Hektor. Reminds me of my youth. My stepdad painted cars and all I ever did was sand!

@HomieHektor

3 жыл бұрын

james it’s just fun to do 🎨

@jamesu

3 жыл бұрын

@@HomieHektor Have a great day!

Firme! Nice job, looks great!

That clear coat will harden in your lungs.. 2 part clear coats are dangerous to breath in. Grab a respirator bro :/

@v8foraheart884

3 жыл бұрын

Can’t damage your lungs if they’re already damaged 😎

@zk9964

3 жыл бұрын

Agreed. For anyone watching you really should wear at least a half face mask with proper gas/vapor cartridges. This paint has isocyanate in it which will bond to your lungs. The harbor freight respirator will even work to an extent for this. Nice video though, it looks pretty good.

@jacobbrown1476

3 жыл бұрын

He had one in the reflection that i saw

@freakyfrank1549

3 жыл бұрын

@@v8foraheart884 thats not how that works lol

@Brokenneckj

2 жыл бұрын

I don't always breath in.. But breathing yeah I do that both ways, call me old school. Maybe I'm a chingas of the dero variety.

I just did this re paint on my roof this weekend and the 2K clear coat is legit awesome stuff, i was forced to paint it outside in windy conditions and despite that it still turned out awesome. I will be re painting my whole SUV ...I wore an N95 face mask too because that is some strong stuff

@HomieHektor

3 жыл бұрын

That’s right. This stuff works wonders 🤙🏼

@micky5545

3 жыл бұрын

@@HomieHektor can i do this outdoors? Because wanna repray a car but got no where indoor to do it

@HomieHektor

3 жыл бұрын

@@micky5545 yes, just make sure the conditions are ideal 👍🏼 wind, weather, temperature

This was the best video out there super helpful super clear instructions you have saved my life as a girl just tryna make my car cute! Thank you thank you thank you !!!!!! Sending Love from the uk

That little chingadera!😂😂😂 I couldn't stop laughing when you said that. Great video! Earned a sub here.

Nice job brother 👍 looks good. I've got a kool chevy work truck,454,that'll I'll be painting. It's currently red,thanks for the helpful tips.

Great video - gonna apply it to my truck......goodjob Hektor!

Nice to see you back!

Hard enough to sand and buff that 2k is great! I love this color it looks great!

Good stuff bro! I gotta paint my wife's bumper on her truck. I was thinking of doing it diy, but I'm afraid of messing it up.

That turned out looking good i was shocked

You got a new sub here bro. I'm not even going to try and watch another video because this is all I need. I pretty much knew all this but looking at what you did will definitely make me do a betrer job on my Volvo S40. 💪🏾💪🏾👍🏼

Pear looks awesome!

This helped me tons! Ty !

Beautiful family!

Great photo of your family!

Gracias Héctor step by step good job bro

@HomieHektor

3 жыл бұрын

Thanks for watching, make sure you see the rest of ‘em 👍🏼

Beautiful family bro !! God bless you!!

Was considering this DIY. Thanks for the vid ! I have now learned I will be swiping a card thru a reader at a local paint and body shop. I would fail miserably with all the prep work long before paint.

Excellent. Thank you for the resource.

what a good job you did

Homie Hektor. Papí I just looked at your real time video. My Brother LOVE THE PAINT JOB! Man it looks MARVELOUS, from a can? My Brother you're SUPERB with your skills! I'm going to try that with my old 2001 PT. Cruiser. Because it needs some touch-ups. Keep making more videos, whenever you have time. I'll like to see you spray over an entire car with some RATTLE CANS! Peace and Love Brother! From the U. S. Virgin Islands.

Hecktor, brah you kill me. Good show! More Chingaderos, por favor.

Looks great!!

This little chinga de- era down here .I'm weak asf 😂😂😂🤣🤣🤣🤣🤣

Make sure after using cans, (applying) you turn upside down and spray until color of paint becomes clear. Takes a couple seconds every time, and keeps nozzle clean. Those blotches are from not cleaning the nozzle, upside down spray in between use. Dry paint builds up with each use inside nozzle until the flow is compromised and starts splotching like that. Simple after use couple seconds upside down clears and cleans the nozzle, and you are off and running, even good to go after shelved. Nice work friend.

@HomieHektor

2 жыл бұрын

Gotcha 👍🏼

Nice result! I Had the same problem splatters occuring with spraypaint. What helps is turning the can upside down and spray (short) between coats. This will actually clean up the nozzle for your next coat.

1:49 ah the sound of a water drop 💧 😂

@ShadowIYI

3 жыл бұрын

Like a poo plop

@swagguy4101

3 жыл бұрын

@@ShadowIYI perfection

Major helpful vid great presentation thank you

That's pretty good homie for a rattle can 💪🏼💪🏼

Great job bro.. explained well

damn bro! Im so glad that I came across your video. I have a 2012 civic Si and man my paint looks like hell on the roof and the trunk. Gonna give it a go and hopefully it turns out nicely.

Thanks Hektor, you really explained that well! I gotta do a whole car using this method D:

The was pretty awesome

Put the cans in the sun to "pressurize" them. If no sun that day, soak 'um in hot water, leave the spray nozzle above and out of the water. Hector, that looks awesome man, I'm impressed!!!

You are spraying in 99 degree weather, that's why the paint is coming out that way. Turned out great by the way, one of the better videos out there.

Def need that clear coat

Good job bro. All it needs is a good machine polish to get rid of the haziness from certain angles and make it completely glossy.

Just came across this. Content was chill. Then I saw the weather and you were from Pomona!! Ayeeeee hell ya. IE babyyyy! Lol you got my follow just for being from the same city as me

I painted a door handle with rattle cans before. It turned out perfect. But never tried to paint a whole fender before.

Really pro job thank you

¡Gracias! I learned so much from you today... y una palabra nueva, chingadera.

“Chingadera”...subscribed 😆

Oh Homie, I love your tips and little quips that I remember from HS!!! Chingadera! Freakin' haven't heard that in 40 years, my brother! Great informative vid! Thx! Subscribed!

Looks great! Were you going to wet sand it at all with 3000-5000 grit afterwards and polish or nah?

Awesome video good tips Good job I love it

Good job !!!

I have had fantastic luck as of late with Cans.. I can not justify cleaning my SATA for the cost of a spray can I did half of a Silve bumper cover, and tho you can not blend, it came out great

It helps putting your cans in warm water before spraying to get less orange peel

@HomieHektor

3 жыл бұрын

It was 99 degrees when I was doing this, I don’t think that would’ve helped 👍🏼

@Seak305

3 жыл бұрын

Agree, that would of helped out a lot

Looks good hommie. Wet sand the clear coat to get an even shinier finish

Cut buff and polish will make this job look even better, good job bro

Great video, if you wanted to do the whole car, would you get a spray gun and air compressor, would that be more economical for the paint, primer, and clear coat investments ? Cheers

The paint code won’t always be in the drivers door jamb. Some may be in the trunk, glovebox or under the hood.

Looks good

That was good!

that's a nice paint job, but dont forget Hector is going to be running 3 Honda Civics with spoon engines. And on top of that he just came into Harry's and he ordered 3 T66 turbos, with NOS, and a Motec system exhaust

@HomieHektor

3 жыл бұрын

🚗💨

Looks nice bro, Good job.

You really need to lay thicker layer of clear,then it will be much more glossy. ;)

@HomieHektor

3 жыл бұрын

ClownKilla 👍🏼

@SK-se7ox

3 жыл бұрын

Even primer and the black layer could be more thick

Good job to see at the end ! By the way ... .. nice family ! 👍 Greets from Belguim (europ)